This SAE Recommended Practice was prepared by the SAE Fuels and Lubricants Technical Committee: (a) to assist the designers and users of heavy-duty transmissions in the selection of powershift transmission fluids for field use and (b) to promote a uniform practice for use by marketers of lubricants and equipment builders in identifying and recommending these fluids by type. This classification is designed for fluids used in heavy-duty truck, bus, earthmoving, and marine transmissions or steering clutches. The fluids must perform the following five functions: 1. Transmit hydrodynamic energy in a torque converter. 2. Transmit hydrostatic energy in hydraulic circuits. 3. Lubricate bearings, bushings, gears, and moving parts. 4. Provide proper frictional properties in lubricated bands and clutches. 5. Provide heat transfer medium for liquid- or air-cooled systems to maintain suitable operational temperature range.
This SAE Information Report was prepared by the SAE Fuels and Lubricants Technical Committee for two purposes: (a) to assist the users of automotive equipment in the selection of axle1 and manual transmission lubricants for field use, and (b) to promote a uniform practice for use by marketers of lubricants and by equipment builders in identifying and recommending these lubricants by a service designation.
This SAE Information Report was prepared by the SAE Fuels and Lubricants Technical Committee for two purposes: (a) to assist the users of automotive equipment in the selection of axle1 and manual transmission lubricants for field use, and (b) to promote a uniform practice for use by marketers of lubricants and by equipment builders in identifying and recommending these lubricants by a service designation.
This SAE Information Report was prepared by the SAE Fuels and Lubricants Technical Committee for two purposes: 1. to assist the users of automotive equipment in the selection of axle1 and manual transmission lubricants for field use, and 2. to promote a uniform practice for use by marketers of lubricants and by equipment builders in identifying and recommending these lubricants by a service designation.
This SAE Information Report was prepared by the SAE Fuels and Lubricants Technical Committee for two purposes: (a) to assist the users of automotive equipment in the selection of axle1 and manual transmission lubricants for field use, and (b) to promote a uniform practice for use by marketers of lubricants and by equipment builders in identifying and recommending these lubricants by a service designation.
Table 1 lists the components of construction and industrial equipment and the various lubricants which may be used. Table 2 lists lubricant types and identifying abbreviations. Lubricants that had common usage in the past are retained in Table 2 to show where the new specifications originated. Original factory lubrication may deviate from field recommendations because of special requirements, such as breakin. Lubricant viscosity grade should be selected for various climatic conditions (described in SAE J300 and SAE J307). The final selection of the lubricant and grade will depend upon the requirements of the equipment manufacturer.
Table 1 lists the components of construction and industrial equipment and the various lubricants which may be used. Table 2 lists lubricant types and identifying abbreviations. Lubricants that had common usage in the past are retained in Table 2 to show where the new specifications originated. Original factory lubrication may deviate from field recommendations because of special requirements, such as breakin. Lubricant viscosity grade should be selected for various climatic conditions (described in SAE J300 and SAE J307). The final selection of the lubricant and grade will depend upon the requirements of the equipment manufacturer.
This SAE Information Report details some of the equipment and procedures used to measure critical characteristics of automatic transmission fluid (ATF) used in current automatic transmissions. It is intended to assist those concerned with the design of transmission components, and with the selection and marketing of automatic transmission fluids for the use in passenger car and light-duty truck automatic transmissions. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of automatic transmission fluids.
This SAE Information Report details some of the equipment and procedures used to measure critical characteristics of automatic transmission fluid (ATF) used in current automatic transmissions. It is intended to assist those concerned with the design of transmission components, and with the selection and marketing of ATFs for the use in passenger car and light-duty truck automatic transmissions. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of ATFs.
This SAE Information Report details some of the equipment and procedures used to measure critical characteristics of automatic transmission fluid (ATF) used in current automatic transmissions. It is intended to assist those concerned with the design of transmission components, and with the selection and marketing of automatic transmission fluids for the use in passenger car and light-duty truck automatic transmissions. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of automatic transmission fluids.
This SAE Information Report details the important new performance properties and suggested test methods for lubricants used in e-Mobility drivetrain components. The lubricants under discussion are those used in electrified drivetrains, mainly electric-transmissions and axles (e-transmissions and e-axles). The scope is limited to those geared systems in which an electric motor (e-motor) is immersed in the powertrain lubricant or comes in contact with the powertrain lubricant. Though the report focuses on new lubricant attributes, some information on conventional lubricant attributes is included. The information presented here will be helpful in understanding the similarities and differences between conventional (i.e., internal combustion engine (ICE)) and e-Mobility powertrain systems.
The gear lubricants covered by this standard exceed American Petroleum Institute (API) Service Classification API GL-5 and are intended for hypoid-type, automotive gear units, operating under conditions of high-speed/shock load and low-speed/high-torque. These lubricants may be appropriate for other gear applications where the position of the shafts relative to each other and the type of gear flank contact involve a large percentage of sliding contact. Such applications typically require extreme pressure (EP) additives to prevent the adhesion and subsequent tearing away of material from the loaded gear flanks. These lubricants are not appropriate for the lubrication of worm gears. Appendix A is a mandatory part of this standard. The information contained in Appendix A is intended for the demonstration of compliance with the requirements of this standard and for listing on the Qualified Products List (QPL) administered by the Lubricant Review Institute (LRI).
The gear lubricants covered by this standard exceed American Petroleum Institute (API) Service Classification API GL-5 and are intended for hypoid-type, automotive gear units, operating under conditions of high-speed/shock load and low-speed/high-torque. These lubricants may be appropriate for other gear applications where the position of the shafts relative to each other and the type of gear flank contact involve a large percentage of sliding contact. Such applications typically require extreme pressure (EP) additives to prevent the adhesion and subsequent tearing away of material from the loaded gear flanks. These lubricants are not appropriate for the lubrication of worm gears. Appendix A is a mandatory part of this standard. The information contained in Appendix A is intended for the demonstration of compliance with the requirements of this standard and for listing on the Qualified Products List (QPL) administered by the Lubricant Review Institute (LRI).
The gear lubricants covered by this standard exceed American Petroleum Institute (API) Service Classification API GL-5 and are intended for hypoid-type, automotive gear units, operating under conditions of high-speed/shock load and low-speed/high-torque. These lubricants may be appropriate for other gear applications where the position of the shafts relative to each other and the type of gear flank contact involve a large percentage of sliding contact. Such applications typically require extreme pressure (EP) additives to prevent the adhesion and subsequent tearing away of material from the loaded gear flanks. These lubricants are not appropriate for the lubrication of worm gears. Appendix A is a mandatory part of this standard. The information contained in Appendix A is intended for the demonstration of compliance with the requirements of this standard and for listing on the Qualified Products List (QPL) administered by the Lubricant Review Institute (LRI).
The gear lubricants covered by this standard exceed American Petroleum Institute (API) Service Classification API GL-5 and are intended for hypoid type, automotive gear units, operating under conditions of high-speed/shock load and low-speed/high-torque. These lubricants may be appropriate for other gear applications where the position of the shafts relative to each other and the type of gear flank contact involve a large percentage of sliding contact. Such applications typically require extreme pressure (EP) additives to prevent the adhesion and subsequent tearing away of material from the loaded gear flanks. These lubricants are not appropriate for the lubrication of worm gears. Appendix A is a mandatory part of this standard. The information contained in Appendix A is intended for the demonstration of compliance with the requirements of this standard and for listing on the Qualified Products List (QPL) administered by the Lubricant Review Institute (LRI).
This SAE Standard covers multipurpose gear-lubricating military oils (see 6.1). This document is equivalent to MIL-PRF-2105 when all requirements are met.