This procedure incorporates a modified driving cycle replicate of consumer operation as contained and shown in SAE J1082b (January, 1979) and which is run on a suitable road or test track. The procedure yields cold start and warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes.
This procedure is a modification of the urban driving cycles noted in SAE J1082 and which is run on a suitable road or test track. The procedure yields cold start/warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes.
This procedure incorporates a modified driving cycle replicate of consumer operation as contained and shown in SAE J1082b (January, 1979) and which is run on a suitable road or test track. The procedure yields cold start and warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes.
This procedure is a modification of the urban driving cycles noted in SAE J1082 and which is run on a suitable road or test track. The procedure yields cold start/warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes.
This procedure incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns. The procedure is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on a test track or on suitable roads. The urban driving cycle forms the basis of a Cold-Start Test Procedure described in SAE Recommended Practice SAE J1256.
This procedure incorporates driving cycles that produce fuel consumption data relating to urban, suburban, and interstate driving patterns. The procedure is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on a test track or on suitable roads.
This procedure incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns. The procedure is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on a test track or on suitable roads.
This SAE Standard incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads, or chassis dynamometers.1
This SAE Standard incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads, or chassis dynamometers.1 The urban driving cycle forms the basis of a Cold-Start Test Procedure described in SAE J1256.
This SAE Standard incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads, or chassis dynamometers.1 The urban driving cycle forms the basis of a Cold-Start Test Procedure described in SAE J1256.
This procedure incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads or chassis dynamometers.1 The urban driving cycle forms the basis of a Cold-Start Test Procedure described in SAE J1256.
This SAE Standard incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads, or chassis dynamometers.1
This procedure covers vehicle operation and electric dynamometer (dyno) load coefficient adjustment to simulate track road load within dynamometer inertia and road load simulation capabilities.
This procedure covers two-wheel drive vehicle operation and single-axle electric dynamometer load coefficient adjustment to simulate track road load within the speed range of track testing and the dynamometer inertia and road load simulation capabilities.
This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads. It is the intent of this document to provide standard tests which will allow various performance characteristics of electric vehicles to be cross-compared on a common basis in specifications, technical papers, and engineering discussions. The tests concern attributes of the total vehicle system rather than those of its subsystems and components. Tests of components such as batteries are the subject of separate procedures. The road tests specified in this document are recommended for use whenever possible particularly to establish vehicle performance specifications. The dynamometer procedures are included primarily to facilitate development testing. Section 3 provides definitions of terminology used in this document.
This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads. It is the intent of this document to provide standard tests which will allow various performance characteristics of electric vehicles to be cross-compared on a common basis in specifications, technical papers, and engineering discussions. The tests concern attributes of the total vehicle system rather than those of its subsystems and components. Tests of components such as batteries are the subject of separate procedures. The road tests specified in this document are recommended for use whenever possible particularly to establish vehicle performance specifications. The dynamometer procedures are included primarily to facilitate development testing. Paragraph 2.2 provides definitions of terminology used in this document.
This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads. It is the intent of this document to provide standard tests which will allow various performance characteristics of electric vehicles to be cross-compared on a common basis in specifications, technical papers, and engineering discussions. The tests concern attributes of the total vehicle system rather than those of its subsystems and components. Tests of components such as batteries are the subject of separate procedures. The road tests specified in this document are recommended for use whenever possible particularly to establish vehicle performance specifications. The dynamometer procedures are included primarily to facilitate development testing. Section 3 provides definitions of terminology used in this document.