Search Results

The paper reviews the development and optimization of a SI high performance engine, to be used in Formula SAE/Student competitions. The base engine is a single cylinder Yamaha 660cc motorcycle unit, rated at about 48 HP at 6000rpm. Besides the reduction of engine capacity to 600cc and the mounting of the required restrictor, mechanical supercharging has been adopted in order to boost performance. The fluid-dynamic optimization of the engine system has been performed by means of 1D-CFD simulation, coupled to a single-objective genetic algorithm, developed by the authors. The optimization results have been compared to the ones obtained by a well known commercial optimization software, finding a good agreement. Experiments at the brake dynamometer have been carried out, in order to support engine modeling and to demonstrate the reliability of the optimization process.

The Department of Mechanical and Civil Engineering (DIMeC) of the University of Modena and Reggio Emilia is developing a new type of small capacity HSDI 2-Stroke Diesel engine, featuring a specifically designed combustion system. The present paper is focused on the analysis of the scavenging process, carried out by means of 3D-CFD simulations, supported by 1D engine cycle calculations. First, a characterization of the flow through the ports and within the cylinder is performed under conventional operating conditions. Then, a complete 3D cycle simulation, including combustion, is carried out at four actual operating conditions, at full load. The CFD results provide fundamental information to address the development of the scavenging system, as well as to calibrate a comprehensive 1D engine model.

The Department of Mechanical and Civil Engineering (DIMeC) of the University of Modena and Reggio is developing a new concept of small capacity HSDI 2-Stroke Diesel engine, featuring a specifically designed combustion system. The paper reviews the 2-Stroke engine design process, supported by CFD simulations, both 1D and multi-dimensional. A four stroke automobile Diesel engine is taken as a reference for a theoretical comparison in terms of brake performance at both full and partial load. This comparison shows the potential of the 2-Stroke, as an ultra-compact, efficient and clean engine.

One dimensional CFD codes are standard tools for engine development, in particular for the optimization of intake and exhaust systems. However, the accurate prediction of both engine brake performance and acoustic outputs is not that trivial. A quite critical issue is the modeling of complex engine components, such as air cleaners, plenums, exhaust junctions, silencers, etc. A trade-off is required in order to balance the accuracy of the acoustic analysis and the computational cost, particularly when DOE techniques have to be applied. In this paper a methodology for an integrated acoustic and performance analysis of a high performance SI engine is described. An engine simulation model has been built by using a commercial software, and it has been validated against experiments, finding a good agreement. It is remarked that the measurements of both acoustic and engine performance parameters are taken by using standard facilities and equipment, no anechoic test bench is required.

The paper describes a CFD multidimensional and multicycle engine analysis applied to a novel 2-Stroke HSDI Diesel engine, under development since a few years at the University of Modena and Reggio Emilia. In particular, six operating conditions are considered, two of them at full load and four at partial. The simulation tool is STAR-CD, a commercial software extensively applied by the authors to HSDI Diesel engines. Furthermore, an experimental calibration of the combustion model has been performed and reported in this paper, carrying out CFD simulations on a reference Four Stroke HSDI Diesel engine. As expected, in the multi-cycle analysis a wide dependence of pollutants on trapped charge composition has been found. Much less relevant is the cycle-by-cycle variation in terms of performance parameters, such as trapped mass, IMEP, combustion efficiency, etc.

This paper presents a methodology for the 3D CFD simulation of the intake and compression processes of four stroke internal combustion engines.The main feature of this approach is to provide very accurate initial conditions by means of a cost-effective initialization step. Calculations are applied to a low stroke-to-bore SI engine, operated at full load and maximum engine speed. It is demonstrated that initial conditions for this kind of engines have an important influence on flow field development, particularly in terms of mean velocities close to the firing TDC. Simulation results are used to discuss the choice of a set of parameters for the flow field characterization of low stroke-to-bore engines, as well as to provide an insight into the flow patterns during the overlapping period.

This paper presents a numerical study on a racing engine with variable intake and exhaust geometry and valve actuation. The study is carried out by using dynamic engine simulations. Aim of the analysis is the evaluation of the benefits these devices have on engine performance. Results show clear advantages over the full range of engine speed.

This paper presents a numerical study of the combustion chamber design influence on the performance of racing engines. The analysis has been applied to the Ferrari 10 cylinder 3.0 liter S.I. engine adopted in Formula One racing. The numerical investigation aimed to asses the influence of stroke-to-bore ratio changes on engine performance within real life design constraints. The effects of the stroke-to-bore ratio on both the volumetric efficiency and the thermal conversion efficiency have been investigated. Flame front area maps, wall areas wetted by burned gases, mean flow field patterns and main turbulent parameters have been compared for two different S/B ratios. Since higher intake and exhaust valve areas per unit displaced volume result in a higher volume of piston bowls, a lower S/B ratio leads to a lower compression ratio, which strongly limits the indicated mean effective pressure.

This paper compares different engine solutions for the FIM MotoGP World Championship. Starting from the general guidelines given in a previous paper [2], in this study the specific features of each engine architecture (3 and 4 in line, V4, V5 and V6) are considered. 1-D engine simulations, based on a previously validated model, are extensively used to optimize each solution, as well as to provide a comparison among the engines in terms of dynamometer performances. Some issues concerning engine balance, engine overall dimensions, intake and exhaust system lay-out are discussed. Finally, the influence of the engine on the bike acceleration is calculated by means of a simple simulation at the Mugello track. The comparison has shown slight differences among the proposed configurations. Globally, the V engines, with four and five cylinders, have resulted to be the best solutions.

In this paper the 1-D modeling of flow through the assembly of valve and port in internal combustion engines is discussed. Three dimensional effects and flow losses close to the valve are accounted for through the experimental effective area, determined at a steady flow bench. The steady flow bench is standard equipment, widely used for engine design and development. The classic method is adequate to the purpose as long as the objective of measuring the effective area is a comparative process for the experimental improvement of the flow through the valves. On the contrary, if the effective area is used for engine cycle simulation, the experimental results must be considered with care. It is demonstrated in this study that, for the outflow from a cylinder to a valve, standard experimental practice can sometimes produce a significant error on the flow rate predicted by simulation.

The design of 4-stroke engines, complying with the new Motorcycle Road Racing World Championship regulations is discussed. Similarity rules and non dimensional parameters from a database on racing engines are used to define some general guidelines. More specific information about friction losses and combustion is derived from experiments, carried out on a 3-cylinder MotoGP prototype engine. These experiments provided the input needed to set up and validate a base model for 1D thermo-fluid-dynamic calculations. Engine simulation is employed for optimizing several design parameters. A comparison between the proposed methodology and a few design criteria presented in literature is made. Finally, the brake performances of some optimized engines are predicted.