Search Results

Due to several indeterminate factors, the assessment of the durability performance of a vehicle body is traditionally accomplished using test methods. An analytical fatigue life prediction method (four-step durability process) that relies mainly on numerical techniques is described in this paper. The four steps comprising this process include the identification of high stress regions, recognizing the critical load types, determining the critical road events and calculation of fatigue life. In addition to utilizing a general purpose finite element analysis software for the application of the Inertia Relief technique and a previously developed fatigue analysis program, two customized programs have been developed to streamline the process into an integrated, user-friendly tool. The process is demonstrated using a full body, finite element model.

Locations of key body segments of Hybrid III dummies used in FMVSS 208 compliance tests and NCAP tests were measured and subjected to statistical analysis. Mean clearance dimensions and their standard deviations for selected body segments of driver and passenger occupants with respect to selected vehicle surfaces were determined for several classes of vehicles. These occupant locations were then investigated for correlation with impact responses measured in crash tests and by using a three dimensional human-dummy mathematical model in comparable settings. Based on these data, the importance of some of the clearance dimensions between the dummy and the vehicle surfaces was determined. The study also compares observed Hybrid III dummy positions within selected vehicles with real world occupant positions reported in published literature.

During frontal and rear end type collisions, very large forces will be imparted to the passenger compartment by the collapse of either front or rear structures. NCAP tests conducted by NHTSA involve, among other things, a door openability test after barrier impact. This means that the plastic/irreversible deformations of door openings should be kept to a minimum. Thus, the structural members constituting the door opening must operate during frontal and rear impact near the elastic limit of the material. Increasing the size of a structural member, provided the packaging considerations permit it, may prove to be counter productive, since it may lead to premature local buckling and possible collapse of the member. With the current trend towards lighter vehicles, recourse to heavier gages is also counterproductive and therefore a determination of an optimum compartment structure may require a number of design iterations. In this article, FEA is used to simulate front side door behavior.

Automotive product development requires higher degree of quality upfront engineering, faster CAE turn-around, and integration with other functional requirements. Prediction of potential durability concerns using analytical methods for sheet metal structures subjected to road loads and other customer uses has become very important. A process has been developed to provide design direction based upon peak loads, simultaneous peak loads, and vehicle program analytical or measured loads. It identifies critical loads at each input location and load sets for multiple input locations, filters load time histories, selects critical areas and analyzes for fatigue life. Several case studies have been completed. The results show that the variations are consistent with the accuracies in finite element analysis, road load data acquisition, and fatigue calculation methods.

Automotive hybrid electric vehicle applications require 1 million (or more) start-stops. This same level of start-stops is also required for hydrogen PEM fuel cell vehicles. In this investigation, a test regime is developed to stress the failure mode of a set of airfoil journal bearings caused by start-stops, and conceive a proper improvement to meet the requirement. Airfoil bearings have been limited by the number of start-stops due to their inherent wearout of coating(s) at low speed. A complete electronic air cathode compressor (electronic supercharger) assembly is tested, employing a pair of φ25 mm journal airfoil bearings. The foils have 34 μm of surface PTFE coating. After 50,000 start-stops, the coating is worn through. Next an improved system is tested, which has modified coating on the bearing journal surfaces. These bearings are examined roughly every 250,000 start-stops. After 1 million start-stops, the coating has worn 5 μm.

Spot weld failures of complicated structures, such as automotive bodies, are difficult to explain using current multiaxial spot weld failure theory. After introducing the in-plane rotational failure mode, some unexplainable spot weld failures become explainable. The purpose of this report is to introduce the spot weld rotational test, its relative strengths and its response characteristics. It is found that the strength of a spot weld under the in-plane rotational mode is far below the strengths of the same spot weld under other failure modes such as in-plane tensile/shear. The work conducted in this study could be a foundation for a new generation of multiaxial spot weld failure theory development.

High mileage NVH performance is one of the major concerns in vehicle design for long term customer satisfaction. Elastomeric components such as suspension bushings, engine mounts and tires function as vibration isolators in a vehicle. High mileage tends to cause the degradation of these components which in turn affects vehicle overall NVH performance. The present paper discusses the characteristics of bushing degradation based on laboratory bushing test data. Vehicle subjective evaluation and CAE modeling methods are used to develop a fundamental understanding of the effects of bushing degradation on vehicle NVH performance. The concept and analysis methodology are demonstrated using the front and rear suspension strut mounts and tire inputs which simulate road excitations but they are valid for other elastomeric components such as engine mounts and excitations. The knowledge derived in the study can be used as a generic guideline in designing vehicles for high mileage NVH robustness.

This work presents a statistical approach for simulation based on Monte Carlo method. As an exercise of the method a CAE vehicle dynamics model was specifically created to evaluate the likelihood to meet a given target driving a maneuver for given inputs variations. In the exercise, three different inputs were chosen as stochastic inputs (also called noise factors) and all relevant information about their statistics has been raised, based in components information. The chosen inputs are: front/rear dampers curves, front/rear ride heights and tire surface temperature. A brief description of the Monte Carlo technique is presented. The choice of this method is due to the reduced number of simulations required to have a given accuracy in comparison with other approaches, especially for multivariable system. As output variable for the exercise, the tire patch height was chosen and the resulting probability density function of it is presented.

High mileage NVH performance is one of the major concerns in vehicle design for long term customer satisfaction. The current paper is concerned with performance analysis of high mileage vehicles which cover four automobile manufacturers and five vehicle families of the same weight class based on subjective evaluation data. The analysis includes the assessment of five vehicle families from the following aspects: overall and NVH performances, performance by individual attribute, degradation history of each vehicle family, performance variation within each vehicle family. Since the data are statistical in nature, statistical methods are employed, numerically and graphically, in the analysis. The performance categories which exhibit most degradation are identified. The analysis method presented in this paper is applicable to any high mileage vehicle fleet subjective data. The knowledge derived in the study can be used as a guideline in designing vehicles for high mileage NVH robustness.

Simple statistical aids, such as this computer program for calculating minimum sample sizes, can aid engineers in their decisions. Properly prepared, these statistical aids do not require the engineer to become a statistician.

A major portion of the Ford ceramic turbine rotor fabrication program is directed at a multielement approach in which elements of various complexity and property requirements such as the ring of blades, the hub, reinforced platform, etc., are individually formed and subsequently jointed together to form a complete rotor. Testing of such rotors included a cold spin test of each element of the assembly, designed to establish its strength level while photographing the failure to establish the failure mode. Assemblies of two or more elements joined or bonded under a variety of conditions have also been cold spin tested during the development of the joining technique and the evaluation of various design modifications. A wide range of failure conditions have been identified during the cold spin testing phase allowing the development of improved rotors suitable for subsequent hot test and engine development.

One of the many computer oriented structural programs which utilizes the finite element technique is briefly discussed. Examples are presented to demonstrate the application of this program to actual product engineering structural problems. Correlation between predicted deflections and stresses and those obtained in the laboratory are presented. Computer graphics provide a unique method of visually interrogating input data and displaying output data. Graphs, stress contours, and deflected structures obtained by this method are presented.

Current trends in the auto industry requiring tighter dimensional specifications combined with the use of lightweight materials, such as aluminum, are a challenge for the traditional manufacturing processes. The hemming process, a sheet metal bending operation used in the manufacturing of car doors and hoods, poses problems meeting tighter dimensional tolerances. Hemming is the final operation that is used to fasten the outer panel with the inner panel by folding the outer panel over the inner panel. Roll in/out is one of the main quality concerns with hemming, and keeping it under tolerance is a high priority issue for the auto manufacturers. Current hemming process technology, given the mechanical properties of current materials, has reached its saturation limit to deliver consistent dimensional quality to satisfy customers and at the same time meet government standards.

The European safety regulation plan regarding frontal barrier offset impact calls for 30° angular impact protection in 1995 and a perpendicular 40% offset deformable barrier impact protection in the 1998 time frame. However, various other governmental and private agencies are looking at alternative test conditions. The Auto Motor and Sport Magazine and other insurance agencies have been conducting rigid barrier front impact tests at 40 and 50% offsets. In this study various test conditions were examined analytically. Detailed finite element models were developed to understand the implications of these impact conditions. The models provided insight into energy management mechanism, load transfer and vehicle deformation patterns due to offset impacts on to perpendicular and angular barriers. Several potential offset conditions were simulated using the FEA models.

As customer expectations rise, automotive seat comfort is becoming an increasingly important design goal. This paper explores the application of two objective measurables to the design of automotive seats. These measurables are EMG (electromyograph) data and seat pressure distribution data. An attempt is made to correlate these measurables with subjective comfort. An experiment is designed to collect the required analytical and subjective data. This data is then analyzed statistically to discover any correlations that may exist. The resulting correlations found in the statistical analysis are not large enough to be the basis for seat design, but indicates that with further work seat comfort may be measured objectively. The results of this research will lead the direction for further work.

This paper describes the steps utilized in the development of the Flex Fuel program by the Ford South America Product Development team to implement a reliability plan. A reliability plan, understood as series of tools to avoid failure mode occurrence, is particularly important when introducing a new technology. Robustness, as the ability of a system to perform its intended function in the presence of variable operational conditions, is contained in the reliability concept and is a key aspect of this plan. Several factors that could affect the vehicle performance were listed, classified and prioritized in order to establish a preventive action plan. The tools were used first at the vehicle level, and then cascaded down to subsystem and component level. Also, with the results of this analysis, design verification methods were enhanced to capture real world usage conditions.

New Developments on the construction and the analysis of Failure Modes and Effects Analysis increase the efficiently of constructing and analyzing FMEA's. These developments also improve the focus on the priorities for achieving the maximum improvements while providing efficient utilization of resources. These enhancements to the FMEA are accomplished by the introduction of four new developments; 1) An FMEA Input Form 2) An Area Chart for Analysis, competing with the traditional RPN's, 3) A Common Cause Screening Matrix and 4) A Key Cause Summary Chart.

Failure to provide consistent results in the parallel implementation of a crash simulation can render the simulation code unusable as a design heuristic. This paper describes a parallel implementation of a crash simulation package, FCRASH, which was designed from inception for parallel implementation. An example will be given which illustrates the variation a CAE crash analyst may encounter if the problem of parallel consistency is ignored. Techniques used in FCRASH to deliver consistent results in a parallel environment on a CRAY T90 parallel supercomputer will be discussed. This work has resulted in a robust crash simulation code that delivers consistent results in parallel environments on a variety of shared memory processors. Finally, problems remaining for delivering the same level of robustness in a distributed memory message passing version of an explicit crash simulation program will be examined.

Engine designers need an objective measurement which can be tested on the engine to indicate acceptable idle quality. An experiment was performed to select objective measures based on cylinder pressure data, and two measures were selected. Standard deviation of indicated mean effective pressure (SDimep) is a measure of the statistical instability of combustion. Lowest normalized value (LNV) is a measure of the tendency toward misfire. These two measures are shown for a set of typical engines. The body of data shows the relation of SDimep and LNV to burn duration and timing.

A method is described for predicting the reliability and useful life of an automotive powertrain system using a warranty database or from warranty records. The database requires failure corrections for misdiagnosis from duplicate data, trouble-not-identified records and multiple failure modes. Compensations not included in the database for high-mileage drop-out and warranty repairs less than the deductible amount, are also necessary. As an example, the cumulative hazard function of the Bathtub Hazard Rate distribution is fitted to the converted removal data of a typical automotive powertrain, to determine the product life characteristics. An algorithm written in Basic language is used to obtain the analytical results.