Search Results

A new look at tactical combat V/STOL design and utility as affected by emerging technology and mission concepts is given in this paper. History has shown that a certain level of useful load fraction must be attained before an airplane system can be considered operationally successful. Technology trends reviewed in this paper suggest that the time is here or at least near for V/STOL tactical aircraft to achieve a truly viable useful load fraction. Propulsion, structure, and controls technologies will contribute to the success of the tactical V/STOL system. In addition, aerodynamic technology as related to interference effects in hover and transition, and as required for efficient supersonic cruise and combat, significantly impacts the design solution. A unique approach to system design risk assessment is described with results giving technology leverage as a function of design options.

Parallel kinematic mechanisms (PKMs) offer advantages of high stiffness to mass ratios, greater potential for accuracy and repeatability, and lower cost when compared to traditional assembly machines. Because of this, there is a strong interest in using PKMs for aerospace assembly and joining operations. This paper looks at the calibration of a prototype Gantry TAU robot by extending the higher-order implicit loop calibration techniques developed for serial link mechanisms to parallel link mechanisms. The kinematic model is based on the geometric model proposed by Dressler et al., augmented with a cubic spline error model of the motion errors for each of the three translation actuators resulting in 185 parameters. Measurements are taken with a 6-DOF laser tracker, and the kinematic parameters are solved as the maximum likelihood parameter estimate.

Determining local ice crystal icing concentration factors in the region of the forward fuselage is critical for setting the Total Water Content levels for air data probe qualification testing. Simulation, modeling, and testing techniques for this concentration-factor phenomenon are still in their infancy, and there is currently not a significant amount of this type of analysis in the literature. A representative, 3D analysis was conducted using transport airplane geometry and flight conditions that explored the sensitivities resulting from parametric changes to flight and ice crystal icing conditions, particle modeling parameters, and bouncing effects.

A team from the USA rotorcraft industry, NASA, and academia was established to create a validated high-fidelity computational fluid dynamics (CFD) icing tool for rotorcraft. Previous work showed that an oscillating blade with a periodic variation in angle of attack causes changes in the accreted ice shape and this makes a significant change in the airfoil drag. Although there is extensive data for ice accumulation on a stationary airfoil section, high-quality icing-tunnel data on an oscillating airfoil is scarce for validating the rotorcraft icing problem. In response to this need, a two-dimensional (2D) oscillating airfoil icing test was recently performed in the Icing Research Tunnel at the NASA Glenn Research Center. Three leading-edge specimens for an existing 15-inch chord test apparatus were designed and instrumented to provide the necessary data for the CFD code validation.

Flight in icing for transport category aircraft certification presents a particularly challenging set of considerations to establish adequate safety commensurate with the associated risk while balancing design complexity and efficiency. A review highlighting important aspects of the regulatory evolution and guiding principles for flight in icing certification is presented, including the current standards and recent rulemaking activity.

With the increasing usage of composites for aerodynamic surfaces, the use of bonded composite repair processes are becoming more common. The repair process remains a largely manual process, with repair technicians scarfing or stepping, tracing the plies, fabricating repair patches and finally bonding the patch. The patch fabrication process becomes increasingly tedious and tiring due to cutting and tracing of each individual ply twice for thermal surveying and the final repair patch. We have developed a system that can replace the tracing and cutting components of the fabrication process using low cost, commercial off the shelf (COTS) tools. We present the ply boundary extraction method used and detail the nesting algorithm used to produce the final plies. Our software is benchmarked against the manual process with a list of successfully cut materials using a low cost fabric cutter with a steel drag blade.

Engineering plastics are now available for use on lightly loaded aircraft structure. These materials have excellent cost benefits as well as producibility benefits over their hand laidup predecessors. They are especially useful in the strut and nacelle areas where many of the fairings are attached for aerodynamic purposes only and may have rather complicated contours. In addition to lower costs, the manufacturing process is consistent, unlike hand laidup parts, which often require rework. In the strut and nacelle area one of the major requirements for all parts is sonic durability. This paper is intended to explain the test setup and test procedure for sonic testing of thermoplastics and thermosets and the results of the testing up to this point. Included in this explanation will be the assumptions made, the test setup, results of the testing and conclusions drawn from the testing.

The advantage of higher strength to weight and higher stiffness to weight ratios for composite structure compared to metallic structure is well known in the aerospace industry, especially to commercial airline world. Its increased usage in the airplane structure is a direct reflection of the benefit in reduction of operating costs by lowering the fuel usage. This factor turned out to be more important for the airlines after the September 11, 2001 incident and also due to the increase in fuel prices. Besides reduction in the operating costs, airlines are seeking ways to reduce their maintenance costs. Most of the damage to the aluminum structure airplanes is attributed to corrosion. The non-metallic composite structure has an excellent property of resistance to corrosion. The structure is more damage tolerant due to the absence of fastener holes. As a result, its increased usage serves the airlines by lowering the maintenance and inspection costs.

The term “3 inch ice shapes” has assumed numerous definitions throughout the years. At times it has been used to generally characterize large glaze ice accretions on the major aerodynamic surfaces (wing, horizontal stabilizer, vertical stabilizer) for evaluating aerodynamic performance and handling qualities after a prolonged icing encounter. It has also been used as a more direct criterion while determining or enforcing sectional ice shape characteristics such as the maximum pinnacle height. It is the authors’ observation that over the years, the interpretation and application of this term has evolved and is now broadly misunderstood. Compounding the situation is, at present, a seemingly contradictory set of guidance among (and even within) the various international regulatory agencies resulting in an ambiguous set of expectations for design and certification specialists.