Search Results

The purpose of this paper is to illustrate the use of Taguchi experimental methods as a development tool for designing a manufacturing process for inner door panels. Through analysis of experimental results, it was possible to identify critical manufacturing variables, as well as demonstrate inherent process capability.

A new tool for analyzing transmissions that use planetary gearsets is presented. With this tool, entire transmissions are usually represented by a single lever, and the calculation of most characteristics is as simple as summing moments of a lever. A miniature cookbook of levers, for various planetary arrangements is included which can be helpful in selecting a planetary to achieve the desired objectives of a user.

This paper describes the rapid development of the Ford GT transmission, from concept phase to production, where the technical challenges involved are implicit in the specifications provided. It presents the steps taken at a project management level to expedite development, as well as the tools used to design and rate components at the design stage. Examples of concurrent engineering are given as well as management techniques used to predict and address key risks. In addition, details of analysis and test procedures are given, underlining their contribution to the rapid introduction of the transmission to the market place.

This paper describes some methods for greatly reducing or possibly eliminating subjective tuning of suspension parts for ride and handling. Laptop computers can now be used in the vehicle to guide the tuning process. The same tools can be used to select solutions that reduce sensitivity to production and environmental variations. OBJECTIVE Reduce or eliminate time required for tuning of suspension parts for ride characteristics. Improve the robustness of ride performance relative to variations in ambient temperature and production tolerances. PROBLEM REQUIRING SOLUTION AND METHOD OF APPROACH Traditional development programs for new vehicles include time-consuming subjective ride evaluations. One example is shock absorber tuning. Even if sophisticated models define force-velocity curves, numerous hardware iterations are needed to find valvings that will reproduce the curves. Many evaluation rides are needed to modify the valvings to meet performance targets.

Software has becoae an inherent and critical component of electronic automotive instrumentation products. The demand for new software development has been increasing at alarming rates, To meet this demand and still provide quality software, the philosophies and methodologies of software engineering must be understood and utilized. This paper discusses the basic concepts of software engineering, the software development life cycle and software development tools and techniques. It also addresses unique points οf interest that are applicable to software engineering in the electronic automotive instrumentation environment.

The Service Bay Diagnostic System (SBDS) will be designed to assist the dealership technician in diagnosing and repairing Ford Motor vehicles. The system hardware will be configured around a Service Bay Computer with mass storage capability and auxiliary service equipment. Major system features include: guided service writer/customer interaction, interactive vehicle diagnostics, information management. capabilities, and an additional aid to identifying intermittent failures through the use of a portable over-the-road data acquisition device. In order to assist the technician in properly diagnosing the causal factor, the Service Bay Computer System will also be enhanced through the use of an expert system knowledge base.

A good manager knows how to administer, direct, and allocate the resources of his organization to the best advantage. The main resources available to him are money; facilities, equipment, and material; people; time; information; and company reputation or image. These resources all interact to create conflicting demands. It is the job of the management scientist to resolve these conflicts satisfactorily through the application of quantitative techniques, some of which are described.

This paper describes the steps utilized in the development of the Flex Fuel program by the Ford South America Product Development team to implement a reliability plan. A reliability plan, understood as series of tools to avoid failure mode occurrence, is particularly important when introducing a new technology. Robustness, as the ability of a system to perform its intended function in the presence of variable operational conditions, is contained in the reliability concept and is a key aspect of this plan. Several factors that could affect the vehicle performance were listed, classified and prioritized in order to establish a preventive action plan. The tools were used first at the vehicle level, and then cascaded down to subsystem and component level. Also, with the results of this analysis, design verification methods were enhanced to capture real world usage conditions.

Typically, “Reliability and Maintainability (R&M)” is perceived as a tool for products alone. Putting emphasis on reliability only at the cost of maintainability is another archetype. Inclusion of both reliability and maintainability (R&M) in all the phases of the machinery and equipment (M&E) life cycle is required in order to be world competitive in manufacturing. R&M is mainly a design function and it should be a part of any design review. Inclusion of the R&M concept early in the life cycle of M&E is key to cost effective and competitive manufacturing. Neither responsive manufacturing nor preventive maintenance can raise it above the level of inherent R&M.

This article describes both a computer-aided engineering tool - a computer model - utilized in accelerating design tasks and also the process of building a powertrain design knowledge. The computer model, which integrates engineering and analysis phases into the design process, has been developed to enable rapid evaluation of new powertrain concepts. The model determines the basic geometry of engine and transmission subsystems and components, and allows automation of the engineering and analysis processes. Examples of application of the tool in evaluation of powertrain concepts and the design of components and subsystems are also given.

Resin transfer molding (RTM) is the process of choice for the Body Panels of the Viper Sports car. The objective of this paper is to outline the reasons for the choice of RTM, and discuss development of technology for Class A surfaces and the paint system. Accomplishments to date and finally the work yet to be completed will also be defined. Conclusions from the work to date indicate that the RTM process enables a reduction in vehicle development time through faster prototypes and tool build times and that high quality, Class A surfaces can be successfully achieved even with epoxy tools. Additional work is ongoing to reduce cycle times and finishing costs, and to improve the in-process dimensional stability.

Rapid Prototyping, Fabrication and Tooling is a process that blends a series of technologies (machines, tools, and methods) capable of generating physical objects directly from a CAD database. The process dramatically reduces the time spent during product development by allowing for fast visualization, verification, iteration, optimization, and fabrication of parts and tools. Many new techniques of tooling have been and are being developed by using rapid fabricated parts. These are having a dramatic impact on both timing and costs throughout the automotive industry. One area that these methods can be utilized to their full potential is motorsports. Of particular interest is the growing use of bridge tooling to provide first article through production intent parts that promote cost effective changes.

ONE plastic model is worth 40 lb of blueprints and 40 hr of the explaining that goes along with the prints, according to engineers who have worked with the new plastic “toys” which can serve as perfectly scaled miniatures for virtually every phase of automobile design and manufacture. The extensive benefits occasioned by this revolution in methods may be summarized thus: 1. Shortens design development time by providing a third-dimension evolvement of structure and form. 2. Used in advance discussions for compromising engineering and manufacturing problems, showing construction so clearly that troublesome problems are foreseen; thus enabling clear-cut, reliable decisions with a minimized chance of encountering major revisions. 3. Show in one minute what could not be found on prints for hours, saving time over any other methods, while generating valuable counterproposals reducing costs, operations, man-hours, and so forth. 4.

QFD, FMEA, Process Improvement, Taguchi, Simultaneous Engineering, PDP, Project Management, DVP, DOE, …and the list goes on. Today's automotive product design engineers face a myriad of “tools” (methodologies, techniques, procedures) that are expected to be mastered and used in the course of performing their job. The list continually grows with new tools being added to the existing ones. And each new tool has an associated acronym to add to the confusion. New and inexperienced engineers are often confused by these tools being tossed at them …school did not cover all this ! The experienced engineer is often skeptical. After all, “if I have been a successful engineer for 20 years, why do I need to start doing these things now?” Nevertheless, most of these tools are truly needed by engineers today in order to be competitive in the increasingly complex and sophisticated world of automotive product design.

Lookup tables and functions are widely used in real-time embedded automotive applications to conserve scarce processor resources. To minimize the resource utilization, these lookup tables (LUTs) commonly use custom data structures. The lookup function code is optimized to process these custom data structures. The legacy routines for these lookup functions are very efficient and have been in production for many years. These lookup functions and the corresponding data structures are typically used for calibration tables. The third-party calibration tools are specifically tailored to support these custom data structures. These tools assist the calibrators in optimizing the control algorithm performance for the targeted environment for production. Application software typically contains a mix of both automatically generated software and manually developed code. Some of the same calibration tables may be used in both auto generated and hand-code [ 1 ] [ 2 ].

Work has been performed to study side glass vibrations of a typical automobile using a scanning laser vibrometer. The objective of this work was to achieve better understanding of the source and path mechanisms for aeroacoustically generated wind noise. As a tool for measuring aeroacoustically generated vibrations, the laser vibrometer presents many advantages over traditional methods. These advantages, discussed in this paper, include rapid setup, full field imaging, high spacial resolution, non-contact operation, and wide dynamic and frequency ranges.

We report measurements of interior automotive cabin forced acoustical response (SPL) as a function of frequency from 1 Hz to 200 Hz. The acoustical response was measured at eight positions in the vehicle tested, approximating the positions of passengers and points in between passengers. Variances in experimental data arising from the manner in which measuring equipment is setup in a particular vehicle are reported, and variations in data taken in similarly equipped vehicles are also reported. The purpose of these tests is to determine the measurement variability of a typical vehicle acoustic test.

Computer simulations of vehicle dynamics can be a useful investigative tool in drive-ability and NVH studies. As the present work demonstrates, oscillations of the drive-train under steady-state and transient conditions are amenable to mathematical analysis, especially in the torsional mode. Simulations of such a system with a lock-up torque converter are shown with emphasis on tip-in response, transmissibility of engine firing pulsations and self-excited oscillations. In particular, the method of interactive simulation is shown to be an effective design-aid tool in the investigation of drivetrain vibrations.

The efforts of the ISO “Test Variability Task Force” have been aimed at improving the understanding and at reducing brake dynamometer test variability during performance testing. In addition, dynamometer test results have been compared and correlated to vehicle testing. Even though there is already a vast amount of anecdotal evidence confirming the fact that different procedures generate different friction coefficients on the same brake corner, the availability of supporting data to the industry has been elusive up to this point. To overcome this issue, this paper focuses on assessing friction levels, friction coefficient sensitivity, and repeatability under ECE, GB, ISO, JASO, and SAE laboratory friction evaluation tests.