Search Results

This paper describes a method for effectively reducing a level of idling vibration in heavy-duty trucks, which has been the point at issue lately. In this method, the vibration level is significantly reduced by using a full vehicle model, which is made by finite elements, and varying parameters to study effects. In order to achieve high accuracy, engine excitation forces calculated from the measured fluctuation in the flywheel angular velocity are input to the model. An effective use of this method in an early development stage has enabled us to reduce development cost and the lead-time.

Oil film thicknesses of the piston top ring and the second ring of a truck diesel engine have been measured simultaneously by embedding capacitance type clearance sensors in the ring sliding surfaces. Owing to the above, several phenomena such as the variation in oil film thickness of each ring in one cycle, correlation between the rings, difference in oil film thickness between the thrust and counter thrust-sides, effects of engine operating conditions on oil film thickness, etc. have been determined. Efforts have been also made to analyze the causes of such phenomena according to the measured results of piston slap motion and ring motions, and the calculated results of oil film thickness.

“ISUZU GIGA” series of new heavy duty commercial vehicles introduced in Japan in November 1994 are equipped with new V-type, naturally aspirated PE series engines. The PE series engines supersede PD series which has been well accepted in the markets domestic and abroad. The new series has been designed to meet Japan's new 1994 exhaust emission regulations while achieving high output power, low weight, good fuel economy, and high reliability. One outstanding feature of the PE engines is the use of dry liners which few other V engines have. This has made it possible to accommodate increase bore size and increase engine displacement by 14 % while maintaining the relatively short bore pitch of 146 mm. PE engine is in fact a high output engine with the smallest weight in class. The series includes V8, V10 and V12 engines ranging in output from 210 kW to 331 kW, the latter being Isuzu's most powerful engine. Six models differing in output power are available.

Isuzu B-series engines are direct injection diesel engine comprising 4 cylinder light duty and 6 cylinder medium duty versions. These engines have been marketed on a worldwide basis not only for vehicle use but also for industrial and marine use. The production volume in 1987 was NO.1 in the world in this class. This paper describes the general outline of B-series engines and the 6BG1TC model with turbocharger and intercooler which develops the highest maximum output of these engines. This engine was developed in 1985 for the first time for medium duty truck in the domestic market and introduced in USA market in 1988. For the moment, our engineering efforts are directed to clear USA exhaust emission regulation for 1991.

As a result of WNTE regulations and the introduction of close-coupled aftertreatment systems, exhaust purification at high temperatures in commercial vehicles has become increasingly important in recent years. In this report, we improve the prediction accuracy for NOx conversion at high temperatures in the kinetic model of conventional Cu-selective catalytic reduction (Cu-SCR). Reaction rate analysis indicated that the rate of NH3 oxidation was extremely low compared to the rate of standard SCR. We found that NOx concentration-dependent NH3 oxidations (termed NOx-assisted NH3 oxidations) were key to the rate of NH3 oxidation. The output of the improved Cu-SCR kinetic model was in agreed with experimental results obtained from the synthetic gas bench and engine dynamometer bench. We analyzed the contribution of each reaction to NH3 consumption during Cu-SCR. Under NH3 + NO + O2, standard SCR was dominant at low temperature.

The objective of this study was to develop a test method for heavy-duty HEVs using a hardware-in-the-loop simulator (HILS) to enhance the type-approval-test method. To achieve our objective, HILS systems for series and parallel HEVs were actually constructed to verify calculation accuracy. Comparison of calculated and measured data (vehicle speed, motor/generator power, rechargeable energy storage system power/voltage/current/state of charge, and fuel economy) revealed them to be in good agreement. Calculation error for fuel economy was less than 2%.

This is to introduce a development history of Doubles-Combinations in Japan and a several important technological points briefly. We understand that our wide promotion of these development activities are strongly supported by the General/Technical Committee members. And totally 10 - million kirometers practical operation data included by 3 - famous Japanese fleet owners, these must be very much useful and valuable for anyone interesting those of Trailer-Combination technologies.