Search Results

When driving or riding in a vehicle, the customer is bombarded with sensory stimuli. These include tactile, auditory, olfactory and visual. In addition, the customer may be asked to perform various routine driving tasks that can have an influence on the perception of each of the aforementioned senses. Or perhaps, the influence of one sense may affect the perception of another. Since sound rarely occurs void of felt vibration and vice-versa, there is reason to believe one may influence the perception of the other, or that the two may interact in some way when the customer is exposed to a particular NVH (Noise Vibration and Harshness) event in a vehicle. The NVH engineer wishes to gage a sound or vibration's impact on the customer and make a determination as to whether corrective actions on the vehicle are necessary. NVH issues routinely show up as top warranty and customer satisfaction concerns.

Many decisions need to be made when test track data is used to set up Squeak & Rattle evaluations of subsystems or components. These decisions are judgment-based so different people with different backgrounds and experience levels will make different decisions - few of which can be called right or wrong - but they are different which causes problems. Squeak & Rattle evaluation has become more scientific in recent years as subjective evaluation has been replaced by quantitative methods like N10 Loudness and shakers have become quiet. It is the authors' contention that the variations caused by different judgment calls can no longer be tolerated. Therefore a methodical process was developed which assures that different people will get the same results from the same set of test track data.

In the analysis of automotive vibration signals, it is often desirable to precisely track individual tonal components of a signal over time. This kind of analysis is useful in defining root cause of cyclic vibrations, allowing the engineer to localize a vibration problem to a specific subsystem. The most commonplace analysis methods are block-oriented Fourier Transform (FT) approaches. However, these methods invariably lead to time localization uncertainty and imprecise frequency resolution. Other analysis methods are available that can estimate the precise frequency of content of a signal at every time step, given certain signal assumptions. This paper studies several of these analysis methods. Narrow Band filters, Kalman filtering, Auto-Regressive signal modeling and the Phase Locked Loop are examined as methods of signal decomposition and order extraction.

In this paper, a CAE methodology based on a multiphysics approach for engine gear noise evaluation is reviewed. The method comprises the results and outputs from several different analytical domains to perform the noise risk assessment. The assessment includes the source-path analysis of the gear-induced rattling and whining noise. The vibration data from the exterior surface of the engine is extended through acoustic analysis to perform the engine noise simulation and to identify acoustic hot spots contributing to the noise. The study includes simulations under different engine loading conditions with results presented in both time and frequency domains. Various sensitivity analyses involving different gear geometries and micro-geometries are investigated as well. Finally, the simulation results from three different engines are compared vis-a-vis.

The business environment is ever changing, several innovations have allowed companies to transcend borderlines and become global entities. While the opportunities are numerous so are the challenges. In this fiercely competitive global marketplace, success requires companies to pay closer attention to supplier relations. The relationship between an automotive industry and its suppliers is an example of it, so the application of CAE (Computer Aided Engineering) superelement technique may improve, in terms of NVH (Noise, Vibration and Harshness), the vehicle development efficiency, without compromising confidentiality directives. Most of NVH requirements must be tracked through Transfer Functions (TFs) analyses at response points located on the Trimmed-Body Finite Element Model (FEM), as for example: Point Mobility, Vibration Transfer Function (VTF) and Acoustic Transfer Function (ATF).

Increased focus on fuel efficiency and vehicle emissions has led the automotive industry to look into low weight alternative designs for powertrain system components. These new design changes pose challenges to vehicle attributes like NVH, durability, etc. Further, the requirement of high power applications produces even more complexities. The present work explains how a potential design change of half shafts driven by a desire to reduce weight and cost can lead to NVH problems caused by half shaft resonances and explains how using multiple dynamic vibration absorbers can solve the issue to meet customer expectation while improving efficiency. With the aid of Finite Element Analysis (FEA) & optimization software, interactions between multiple DVA’s on a system was understood and optimal damper parameters for effective damping was identified. The final DVA design was tested and verified on the vehicle for optimal attribute performance.

The objective of this study was to identify and gain an understanding of the origins of noise in a commercial excavator cab. This paper presents the results of two different tests that were used to characterize the vibration and acoustic characteristics of the excavator cab. The first test was done in an effort to characterize the vibration properties of the cab panels and their associated contribution to the noise level inside the cab. The second set, of tests, was designed to address the contribution of the external airborne noise produced by the engine and hydraulic pump to the overall interior noise. This paper describes the test procedures used to obtain the data for the signature analysis, operational deflection shapes (ODS), and sound diagnosis analysis. It also contains a discussion of the analysis results and an inside look into the possible contributors of key frequencies to the interior noise in the excavator cab.

Exhaust sensors and actuators used in automotive applications are subjected to wide variety of operating ambient conditions , the performance of these actuators is challenging especially at cold ambient operating conditions, active exhaust tuning valves with position sensors are used to adjust the sound levels, or noise, vibration and harshness (NVH) from a control unit within the vehicle that leads to an improved driving experience wherein the driver selects their preferred sound levels. However, the operating behavior is crucially influenced by the characteristics of the drive cycle and ambient temperature. The study in this paper is intended to evaluate the icing formation at the start of drive cycle and at different ambient temperature conditions. The test data were obtained through real road and chassis dyno testing at different ambient conditions.

This paper summarizes the attributes of automotive exhaust system and provides a guideline for exhaust system design, analysis and development. The exhaust system has various attributes including vibration, acoustics or noise, durability and thermal distribution, flow and power loss, emission, in addition to its interface with vehicle. This paper describes all these attributes and the corresponding performances, and develops criteria for each of the attributes. The paper also describes the interfaces between the exhaust system and powerplant with body structure.

Sunroof is placed in certain high-end vehicles to give user a better driving experience. All automakers are searching alternatives to reduce weight and cost in the vehicle, in which sunroofs are also impacted. Some alternatives are already applied, as a honeycomb paper used in some sunshades that presents benefits, as less weight and with a good cost reduction. Although, due the reduced weight for this part produced in this material, it shows more susceptibility to reproduce the vibration that vehicle propagates in movement, especially in bad condition roads. The sunroof assembly is dependent of the roof reinforcement and roof skin, but in this special case, the validation could be done in the components itself because the interaction of the sunshades is directly dependent of the other sunroof parts, as rails and front frame.

Noise and vibration evaluation of driveline clunk can be challenging as it is the result of driver input conditions and is transient in nature. As with many noise and vibration challenges, the use of computer-aided engineering (CAE) simulation is useful as it allows for detailed study of the phenomenon and prediction of potential improvements. A hybrid approach of physical test-based measurements and CAE analysis can be used to leverage the advantages of CAE in a comprehensive evaluation including the total vehicle noise, vibration, and harshness (NVH) performance. In this paper we present work performed to facilitate engineering evaluations of driveline clunk using both measured test and CAE simulation data. We explain how we used measured test data to inform the CAE analysis, how the simulation approached modelling of the transient clunk event, and how the measured data was used to provide contextual sound for realistic evaluation of the CAE output as heard by the passengers.

Automotive vehicles equipped with Cardan joints may experience low frequency vehicle launch shudder vibration (5-30Hz) and high frequency driveline moan vibration (80-200Hz) under working angles and speeds. The Cardan joint introduces a 2nd order driveshaft speed variation and a 4th order joint articulation torque (JAT) causing the vehicle shudder and moan NVH issues. Research on the Cardan joint induced low frequency vehicle shudder using a Multi-Body System (MBS) method has been attempted. A comprehensive MBS method to predict Cardan joint induced high frequency driveline moan vibration is yet to be developed. This paper presents a hybrid MBS and Finite Element Analysis (FEA) approach to predict Cardan joint induced high frequency driveshaft moan vibration. The CAE method considers the elastically coupled driveshaft bending and engine block vibration due to Cardan joint excitation.

A low-frequency vehicle shuffle can be excited when a reversal of torque occurs in a vehicle's drivetrain. It usually occurs during a throttle tip-in or tip-out event, or a static engagement shift event. This drivetrain shuffle vibration can introduce a vehicle fore-aft vibration that may affect the customer satisfaction of ride comfort and/or powertrain performance. Vehicle test data of the seat track acceleration from a 30 MPH wide-open-throttle tip-out event suggested a strong coupling between the CVT drivetrain shuffle and vehicle fore-aft vibration. An ADAMS based CVT model was developed and integrated into a full vehicle model for dynamic simulation of this vehicle shuffle issue. CAE DOE studies were performed to identify key vehicle and powertrain design parameters that could directly impact the vehicle shuffle vibration. Experimental tests were performed to verify the CAE design improvements of the CVT vehicle shuffle vibration.

The way a subframe for an independent rear suspension attaches to a unibody vehicle is critical for its NVH performance. The force path from the control arms to the body may, in some cases, pass through spots where some body vibration modes with relatively high acoustic radiation efficiency are excited, generating undesired peaks at some frequencies for point and transfer mobilities, as well as for acoustic transfer functions from the subframe to the driver's and passenger's ears. This paper describes a case study of an initial design for a subframe, where a vibration mode of the vehicle's rear underfloor panel was particularly strongly excited causing unacceptable both acoustic and vibrational behaviours, is modified through the evaluation of point mobility curves, as well as acoustic transfer functions, both obtained via finite elements method.

High mileage NVH performance is one of the major concerns in vehicle design for long term customer satisfaction. Elastomeric bushings and brake rotors are key chassis components which tend to degrade as vehicle mileage accumulates with time. The degradation of these components normally causes the overall degradation of vehicle NVH performance. In the current paper two categories of problems are addressed respectively: road-induced vibration due to bushing degradation, and brake roughness due to rotor wear. A system integration approach is used to derive the design strategies that can potentially make the vehicle more robust in these two NVH attributes. The approach links together bushing degradation characteristics, brake rotor wear characteristics, the design of experiment (DOE) method, and CAE modeling in a systematic fashion. The concept and method are demonstrated using a production vehicle.

Closures systems performance is a trade-off between NVH (Noise, Vibration and Harshness) and DCE (Door Closing Efforts) requirements. Dynamic sealing performance and sheet metal rigidity are the key contributors for a stable system. The seals actuate like a spring on the system. Higher seal load is good for NVH performance, adding more dumping to the system, but it will negatively affect DCE, as it will demand additional energy to close the system. Nominal seal load must be defined to achieve a balance between these attributes. This study is about dynamic sealing profiles with variable seal load, which provides tunable solutions to address the trade-off between NVH and DCE on the side doors or rear closures. Dynamic sealing weatherstrips are made of sponge EPDM extruded profiles with a specified load, defined by its CLD (Compression Load Deflection), which is given by the cross section design.

It is a well-know fact that cost and time-to-market constraints have gained an ever-increasing importance in the recent years in the global automotive industry. Either due to economic problems in emerging markets or to the presence of strong competition is US and Europe, automakers strive, using different strategies, to find ways of satisfying these constraints. One of the most promising tools to assist in reducing both development cost and time is CAE (Computer Aided Engineering) or Virtual Prototyping which, by using numerical models of components, systems and/or vehicles, is capable of assessing their behavior in areas such as noise, vibration and harshness (NVH), durability, impact safety and vehicle dynamics. A very important question that is frequently faced by CAE development teams is related to how well the numerical results match those that will be obtained when the vehicle is actually built.

Finite element simulations of powertrain assemblies and components such as an engine block, transmission case, and structural oil pan, are regularly carried out at Ford Motor Company to provide directions for design improvements relevant to durability, minimum weight, noise and vibration characteristics. This paper presents hands-on experience with analyses of two powertrains in terms of computational strategies and resource requirements. The course of future analysis work in the light of current developments in computer technology, is also presented.

The influence of the pin/main bearing journal diameters and the counter weight orientation to crankshaft axial vibration were examined using a fully flexible finite element engine model. The simulation, performed with AVL/Excite, incorporates modal contributions of all interfacing engine components and enables the study of interactions among the components. The simulation successfully predicted crankshaft axial vibration and was validated by measurements. The correlated CAE model was used to study modifications in crankshaft pin and main bearing journal diameters and in the orientation of the crankshaft counter weights. Design direction on how to minimize axial vibration was provided.

The authors participated in a task force that was required to develop a repeatable, dependable, and reliable test procedure to compare, rate, and evaluate the severity of rattles. The assemblies involved in the study are designed and manufactured by different companies and are tested by different people on test equipment and instrumentation from different suppliers. The challenges therefore, were considerable and involved both the vibration inputs and responses as well as the acoustic responses. At the beginning of this activity, it was observed that different test labs using the same Ford vibration specs were obtaining different sounds from the same test item! Clearly, this was unacceptable and the test methods had to be improved and standardized. This paper focuses on vibration related to rattle testing. The particular assemblies used in this study were seat belt retractors.