Search Results

The paper describe investigations on the vibration characteristics of a gasoline engine due to piston slap and a diesel engine due to combustion. Engine parameters and vibration data were recorded and time series signals were obtained. The effect of speed, load and other engine parameters on vibration is investigated. Vibration due to piston slap is analysed with reference to major-minor thrust relationship, cylinder to cylinder variation, piston-slap force diagram and vibration-frequency curves. The experimental results suggest that all reciprocating engines would exhibit a complex vibration pattern due to piston slap at harmonic series of discrete frequencies, and the reason for this is analysed. The vibration transmitted by engine structure in response to the in-cylinder pressure development is termed here as ‘Vibration due to Combustion’ and is assessed from the spectrum of the Combustion Pressure curves and their derivatives in terms of time.

Plastics (polymers) are nowadays clearly a material of choice in all application sectors including in Automobile sector. Automotive manufacturer have relived on new technology for vehicular accessories which are all made-up of different polymers like Acrylonitrile-Butadiene-Styrene (ABS), Poly Carbonates, Poly Methyl Methacrylate (PMMA), Acrylic, glass, resin etc. Although these components offer an impressive range of attractive properties, the effect of climatic conditions on the durability and performance of these materials is not fully understood. The durability, performance and rate of deterioration of these products are all significantly influenced by both the material composition, as well as the climatic conditions to which they are exposed. The degradation/ variation of the mechanical properties of the specimen treated at different environmental/ atmospheric conditions are a primary concern when recommending such a composite for particular use.

Accurate quantification of residual stresses is critical to predict expected fatigue life of the component. Quantification of residual stresses by X ray diffraction method offers substantial accuracy in results as compared to other methods of stress measurements. Depending on component processing and geometry, various stress measurement techniques are used to analyze stress patterns induced by these processing. This paper describes some of the stress measurement techniques by results obtained on two compressor valve (reed) samples which are undergone different processing. First reed sample is analyzed after blanking operation which is expected to give low compressive or tensile stresses whereas second reed sample is analyzed after tumbling operation which is done to get high compressive stresses.

Environmental pollution is of great concern; hence the emission norms for the diesel engines are made more stringent. The purpose of this work is to develop a process to optimize the FIS parameters and select a most suitable FIS by simulation to meet the target emissions. During the combustion optimization exercise of diesel engine, different hardware combinations like injector, HPP etc are matched through testing to achieve the required performance and emissions. The process requires the real testing of the engine on engine dynamometer with various hardware combinations, which is expensive and time consuming. A simulation model of diesel FIS is constructed using ‘AVL Hydsim’. The model is validated by comparing the predicted and the experimental results. The validated model is used for further work. Critical parameters were listed based on the sensitivity analysis on the base model.

Exhaust noise is the major noise source for the automotive vehicle contributing to its interior as well as exterior noise. The Transmission Loss (TL), noise reduction, Insertion Loss (IL) and radiated noise are the major characteristics used to describe the performance of a muffler in an automotive exhaust system. Out of these characteristics, Insertion loss and exhaust radiated sound pressure levels plays a significant role in muffler design as it is a measure of true performance of muffler along with engine/vehicle and very much useful for the designers to compare different silencer configurations. In present work, the sound source is modelled by acoustic impedance and volume velocity of the engine. Since it is difficult to estimate the sound source impedance of the exhaust by measurements either with direct or indirect methods as both are prone to errors and difficult to implement, the empirical equations are used to define exhaust source, to have reasonable accuracy.

The effect of different cold- rolling and cryo-rolling routes on the strength and ductility of Al-6061 alloy was thoroughly investigated. Rolling decreased the grain size and increased the strength according to the Hall-Petch relationship. However subjecting the samples to ageing at different temperatures and for different time period increased the strength and improved the ductility. The ductility was improved due to the rearrangement and even decrease in dislocation density due to recovery and recrystallization during ageing while the strength was maintained due to ageing. Evolution of microstructure was investigated by optical microscopy, scanning electron microscopy. Preliminary hardness measurements coupled with tensile tests indicate the improvement of both yield strength and ductility. The disparity in ultimate tensile strength, yield strength and the elongation to failure with different ageing temperatures and for different time period is determined and discussed.

During the development of dual intake port for a lean burn engine, the conventional method of port characterization, using flow coefficients, was found to be inadequate. A suitable strategy was devised which uses the results from steady state flow bench to compute the total flow through the port at an indicative engine speed and for a particular valve lift behavior. A proper basis for comparison of the baseline single intake port with the developed dual intake port was thus arrived at.

Future emission limits for off-highway application engines need advanced power train solutions to meet stringent emissions legislation, whilst meeting customer requirements and minimizing engineering costs. DI diesel engines with four valves per cylinder are widely used in off- highway applications because of the fundamental advantages of higher volumetric efficiency, lower pumping loss, symmetric fuel spray & distribution in combination with the symmetric air motion which can give nearly optimal mixture formation and combustion process. As a result, the fuel consumption, smoke levels and exhaust emissions can be considerably reduced. In particular, the four-valve technology, coupled with mechanical low pressure and electronic high pressure fuel delivery systems set different requirements for inlet port performance. In the present paper four valve intake port design strategies are analysed for off highway engine using mechanical fuel injection systems.

Light weighting is significant in for automotive industry as it helps in less fuel consumption and to achieve better performance. Aluminium is a candidate material for light weighting. To design a component made of aluminium material, it is necessary to understand the fatigue performance of the material. In this paper, a study is carried out to understand the fatigue performance of aluminium 6xxx series alloys at an early stage of design without carrying out comprehensive fatigue testing. Coffin Manson Parameters are used to predict fatigue life. This research focusses on determining the gaps in existing models for aluminium alloys by carrying out comprehensive review of various models developed for 6xxx series which uses monotonic tensile data. Two models are developed and the predicted fatigue properties for this class of material are further compared with experimental fatigue, monotonic data and literature.

In-cab booming noise is low frequency (20 Hz∼300 Hz) phenomenon excites the cabin structure, which occurs mainly due to excitations from the powertrain, exhaust system, road input, etc. Annoyance due to booming noise affects the In-cab sound quality, which results in passenger discomfort. A diesel passenger car observed booming noise issue when operated at stationary as well as dynamic run-up conditions. In order to increase passenger comfort, experimental root cause analysis conducted on the vehicle to investigate the dominant sources for the cavity boom. Exhaust hanger and one of the engine mount identified as major reason for the booming noise in the cabin. A detailed study was carried out on dynamic property optimization of rubber hanger and possibility to relocate the hanger to improve the vibration transmissibility. Operational measurements conducted on vehicle by attaching finalized exhaust mount to confirm the significant booming noise reduction in the cabin.

Dual fuel operating strategy offers great opportunity to reduce emissions like particulate matter and NOx from compression ignition engine and use of clearer fuels like natural gas. Dual-fuel engines have number of potential advantages like fuel flexibility, lower emissions, higher compression ratio, better efficiency and easy conversion of existing diesel engines without major hardware modifications. In view of energy depletion and environmental pollution, dual-fuel technology has caught attention of researchers. It is an ecological and efficient combustion technology. This paper summarizes a review of recent research on dual-fuel technology and future scope of research. Paper also throws light on present limitations and drawbacks of dual-fuel engines and proposed methods to overcome these drawbacks. A parametric study of different engine-operating variables affecting performance of diesel-CNG dual-fuel engines vis-à-vis base diesel operation is also summarized here.

It is an established fact that virtual knowledge based engineering has revolutionized R & D activities by streamlining processes, ensuring productivity and accuracy. This has resulted in freeing up time for quality interpretational work and decision making for engineering the best of products. Subsequently, homologation is a mandatory requisite activity for product signoff. It certifies the quality of the product and is an important factor in giving the product an authenticity for sale in the market. Homologation entails compliance to regulations existing in form of well-established standards which elaborate systematic and detailed guidelines on conducting physical testing for automotive systems, sub-systems or components for specific vehicle types.

BS-VI or equivalent development calls for tremendous efforts in concept investigation and calibration for engine out, after treatment, diagnostic checks, off-cycle emissions, field performance, component safety etc. Achieving calibration quality for all these tasks is very challenging considering development time and cost with conventional physical testing approach. Present article focuses on assessment of testing and calibration using virtual approach. To prove and validate this approach, a six-cylinder heavy duty diesel engine is selected and configured in HiL environment. The engine plant model is built offline and validated with base engine data at steady state and transient operations and RT model is integrated with ECU hardware. Data for plant model corrections is generated with short measurement campaign. Refined real time plant model is prepared for evaluating different calibration strategies on virtual test bed environment.

Any metal component undergoes various treatments to get desired shape and desired properties. Some of the important properties are strength, hardness, % elongation etc. which comes under mechanical properties. These properties can be easily achieved through heat-treatment process. Typical example of heat-treatment processes are hardening and tempering in case of steel and aging process in case of aluminium alloys. Some of the new emerging materials viz. micro alloy steel does not require any hardening and tempering if cooling rate is maintained. Heat-treatment cycle depends on material grade and its alloying elements. A heat-treatment cycle for any grade is generally fixed based on conventional methods but they are not optimized. The need of hour is to optimize the heat-treatment cycle to improve productivity and energy consumption. Dilatometer is used to optimize heat-treatment cycle on sample level whereas simulation tools can be used for component level.

The present study discusses the effects of engine combustion, performance and emission features of methanol-gasoline blend fired lean burn Spark Ignition (SI) engine. Performance features such as Brake Power (BP), Brake Specific Fuel Consumption (BSFC), Brake Thermal Efficiency (BTE), tail pipe emissions namely Hydrocarbon (HC), Carbon Monoxide (CO), Nitrogen Oxide (NO), Carbon di Oxide (CO2) and combustion characteristics viz. in-cylinder pressure, Heat Release Rate (HRR), Cumulative Heat Release (CHR) and variation of mean effective pressure were measured and compared with that of neat gasoline. Experiments were conducted on a modified sole cylinder four-stroke compression engine (Kirloskar TAF1) to operate as SI engine with a compression ratio of 10.5:1. A new manifold injection system and ignition system were developed by replacing the fuel injection pump and injector.

Dual Phase (DP) steels with their high energy absorbing capacity are fast emerging as materials for automotive body applications with improved crashworthiness. The unique combination of high strength and good ductility associated with the DP steels originates from its specially developed microstructure that consists of martensitic islands in ferritic matrix. The high strength and good ductility are expected to give very good resistance to fatigue crack generation and propagation respectively. This paper discusses the fatigue properties determined for a DP steel grade viz. DP 800. The strain controlled fatigue tests were carried out on the un-notched specimens prepared from 1.2 mm sheets to generate E-N curves. The force controlled axial fatigue tests were carried out on two types of specimens prepared from 1.2 mm sheets to generate S-N curves for two Stress Concentration Factors (SCF) viz. 2.5 and 4.4.

A Generator set is comprised of mainly an Engine, Alternator and Chassis. High Horse-Power Generator development is challenging, with lots of complexities in physical and virtual validations. Creating high fidelity analytical model is always beneficial and economical at the design stages as it avoids repetitive tests on various design concepts. This paper reports analytical methods of developing an FEA model of a Generator for locomotive application and its correlation with Test. Highlighted as well are some of the challenges faced in FE modeling of a large Generator model (60 liters engine capacity) with node count of around 4 million. In this technique, Modal Analysis is first performed to capture the dynamic behavior. More than 95 % correlation is achieved between the FEA and test natural frequencies (Bending modes). Harmonic Analysis with Modal Superposition is then applied to understand the dynamic response of a Chassis under the action of engine vibratory loads.

In a developing country like India, Two-wheelers dominate the automotive market with around 80% market shares. In Indian city traffic conditions, driving a two wheeler is a tiresome job. Manual transmission makes this task even further uncomfortable. So an automatic transmission is a better solution. A new automatic transmission system is developed which can reduce fatigue of drivers. Steps of ARIZ (Algorithm for Inventive Problem Solving) were followed. Ideas or concepts for the design were proposed from various fields and were compared for various parameters like size, weight, complexity, manufacturability, feasibility, efficiency and cost. They were also compared with the existing transmission systems. Based upon the results of the comparison, 5 designs were selected and they were analyzed thoroughly. Finally one design was selected.

In internal combustion engines, rate of fuel burning known as burn rate is a simplified representation of complex in-cylinder combustion process. It is considered as a prime input especially in 1D simulation tool for all important thermodynamic studies. A novel parametric model for prediction of burn rate in heavy duty Direct Injection (DI) diesel engine has been introduced in the present work. A wide range of experimental data with more focus on higher load points with different in-cylinder combustion characteristics is considered and burn rates have been generated using measured pressure trace. Generated burn rates have been studied over different phases of combustion. These burn rate shapes have been analyzed to understand the effect of fuel injection system, air management subsystem parameters along with in-cylinder conditions on combustion. Different mathematical modelling approaches for burn rate approximation like Wiebe function have been studied.

Diesel engines dominate in Heavy-Duty applications due to its better fuel economy, higher durability and larger reliability. Fuels derived from petroleum resources are depleting daily and it’s become a scarce resource for future generation to come. With growing environmental consciousness of the adverse implications brought by excessive usage of fossil fuels, the battle for finding alternative fuels as their substitution is getting heated up. At present, renewable energy from bio-fuels has been peddled as one of the most promising substitution for petroleum derived diesel. Using bio-ethanol blended diesel fuel for automobile can significantly reduce diesel usage and exhaust greenhouse gases. Bio-ethanol can be produced by alcoholic fermentation of sucrose or simple sugars. The main drawback is that ethanol is immiscible with diesel fuel over a wide range of temperatures, and the hygroscopic nature of ethanol leading to phase separation in blend.