Search Results

This paper presents a methodology for predicting thermal comfort inside Midibus cabin with an objective to modify the Heating, Ventilation and Air Conditioning (HVAC) duct design and parametric optimization in order to have improved thermal comfort of occupant. For this purpose the bus cavity is extracted from baseline CAD model including fully seated manikins with various seating positions. Solar Load has been considered in the computational model and passenger heat load is considered as per BSR/ASHRAE 55-1992R standard. CFD simulation predicted the air temperature and velocity distribution inside passenger cabin of the baseline model. The experimental measurements have been carried out as per the guidelines set in APTA-BT-RP-003-07 standard. The results obtained from CFD and Experimental test were analysed as per EVS EN ISO7730 standard and calculated occupant comfort in terms of thermal comfort parameters like Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD).

Any metal component undergoes various treatments to get desired shape and desired properties. Some of the important properties are strength, hardness, % elongation etc. which comes under mechanical properties. These properties can be easily achieved through heat-treatment process. Typical example of heat-treatment processes are hardening and tempering in case of steel and aging process in case of aluminium alloys. Some of the new emerging materials viz. micro alloy steel does not require any hardening and tempering if cooling rate is maintained. Heat-treatment cycle depends on material grade and its alloying elements. A heat-treatment cycle for any grade is generally fixed based on conventional methods but they are not optimized. The need of hour is to optimize the heat-treatment cycle to improve productivity and energy consumption. Dilatometer is used to optimize heat-treatment cycle on sample level whereas simulation tools can be used for component level.

Diesel engine generators are commonly used as a power source for various industrial and residential applications. While designing diesel generator (DG) enclosures requirements of noise control, ventilation and physical protection needs to be addressed. Indian legislation requirement demands DG enclosure insertion loss (IL) to be minimum 25 dB. However for certain critical applications like hospitals, residential apartments customer demands quiet DG sets than the statutory limits. IL targets for such application ranges between 35-40 dB. The objective of this paper is to develop methodology to design ‘Super Silent’ enclosure with IL of 35 dB by Statistical Energy Analysis (SEA) approach for small capacity DG set. Major challenge was to achieve IL of 35 dB with single enclosure and making use of SEA technique for small size enclosure wherein modal densities is very less. Major airborne noise sources like engine, radiator fan and exhaust were modelled by capturing noise source test data.

In today’s automotive industry sound package material design and optimization is important considering the need for weight reduction and achieving targeted sound absorption and sound transmission loss values. As per traditional approach vehicle level noise reduction targets are defined considering flat samples, but in actual vehicle condition molded trimmed parts are used. This paper discusses about the systematic methodology developed for molded sample characterization in terms of BIOT’s properties. Effects of different parameters like area wise thickness variation, density variation on BIOT properties is studied. Comparison of BIOT’s properties of flat and molded dash sample is done to study the effect of molded structure. Using these BIOT’s properties prediction of sound absorption and sound transmission loss results carried out using FTMM approach for flat sample and SEA approach for molded sample.