Search Results

Evaporative emissions of Japanese older and current vehicles (1990-1998MY) and U.S. current vehicles, which were adapted to federal regulations in 1996, were investigated using typical Japanese gasoline. Japanese older and current vehicles exhibited high levels of Running Loss (RL), Hot Soak Loss (HSL) and Diurnal Breathing Loss (DBL), and their emissions showed strong Reid vapor pressure (RVP) dependence. On the other hand, U.S. vehicles showed very weak RVP dependence, between 62kPa and 76kPa. Their emissions also showed very low levels of RL, HSL and DBL. These results suggest RVP reduction is just effective for Japanese older and current vehicles. Evaporative emissions of Japanese and U.S. vehicles were also tested according to a new Japanese test procedure and the 35 degrees centigrade RL test procedure. In the case of the RL and DBL tests, the impact of test conditions on evaporative emissions was discussed as well.

JCAPII gasoline workgroup reported vehicle emission study to comprehend the impact of ETBE blending. In previous study, we focused on the compatibility of ETBE blended gasoline with Japanese current gasoline vehicles in-use. Based on recent discussion with ETBE 8% blended gasoline into the market, more information becomes necessary. In this second report, we studied to comprehend the actual emission impact using realistic model fuels using several base stocks. Fuel properties of T50, T90 and aromatic compound content were selected through discussions. Specifications were changed within the range of the market. Both ETBE 0% and 8% were combined for these fuel matrixes. In total, eight fuels and two reference fuels were tested. Two J-ULEV vehicles (one MPI, and a stoichiometric-SIDI) were procured as representatives. We discussed quantitative and qualitative impact toward emissions. Data regarding CO2 and fuel economy change were also reported.

Clarifying the impact of ETBE 8% blended fuel on current Japanese gasoline vehicles, under the Japan Clean Air Program II (JCAPII) we conducted exhaust emission tests, evaporative emission tests, durability tests on the exhaust after-treatment system, cold starting tests, and material immersion tests. ETBE 17% blended fuel was also investigated as a reference. The regulated exhaust emissions (CO, HC, and NOx) didn't increase with any increase of ETBE content in the fuel. In durability tests, no noticeable increase of exhaust emission after 40,000km was observed. In evaporative emissions tests, HSL (Hot Soak Loss) and DBL (Diurnal Breathing Loss) didn't increase. In cold starting tests, duration of cranking using ETBE 8% fuel was similar to that of ETBE 0%. In the material immersion tests, no influence of ETBE on these material properties was observed.