Search Results

With an ever growing demand for the enhanced control of a vehicle and for the reduction of power and signal distributing wires in a vehicle, there is a pressing need for the development of Local Area Network (LAN) in a vehicle. LAN enables the exchange of various data among several electronic control units (ECUs), and results in the higher controlled performances of a vehicle and the reduction of the wires. In response to this need, two integrated circuits for vehicle multiplexing communication are developed. One is a communication control IC and the other is a bus driver/receiver IC, both based upon the standard of a PWM type of the J1850 for a communication protocol. The communication control IC is designed to have distinctive features such as a highly fail-safe operation and the reduction of the overhead for communication imposed on a central processing unit (CPU) of the ECU.

In the field of automotive body electronic control such as control of door locks, power windows, and wipers, there is a growing need of multiplexing communication to reduce the amount of wire harnesses. To meet this need, we developed a multiplexing communication protocol particularly suited to the body electronic control. Based on the developed protocol, we designed a communication control IC and a simple driver/receiver circuit with a few discrete components. The bus access method of the communication is the CSMA/CD with nondestructive bit arbitration, and its bit rate is 5 kbps. Its transmission media is a single wire. The communication IC has a multiplexing control block and a serial I/O block for an interface with a host CPU. It was fabricated using CMOS technology and has a chip of 2.6mm x 3.0mm in size that contains about 5,000 transistors. The driver/receiver circuit consists of one transistor, one capacitor and several resistors.