Search Results

Virtual validation of automobile components poses a huge challenge and needs continuous process improvements. One of such challenge in FE modelling of welds and understanding its behavior with respect to physical behavior. With the ongoing development of BSVI line of products in commercial vehicle industry, the virtual validation needs to be accurate and close to the physical behavior of the components. The learning and challenges faced during the previous development is implemented in the current study for weld simulation and correlation activity. The brackets welded to the power train components is taken as a challenge in the present work. Initially weld model was depicted in the CAD and was analyzed in CAE by providing proper FE connection. This practice had lot of flaws, approximations due to perpendicularity and flatness concerns in the models leading to consuming a lot of time in model preparation.

In an automobile, main function of the steering system is to allow the driver to guide the vehicle on a desired course. Steering system consists of various components & linkages. Using these linkages, the torque from steering wheel is transferred to tyre which results in turning of the vehicle. Over the life of vehicle, these steering components are subjected to various loading conditions. As steering components are safety critical parts in the vehicle, therefore they should not fail while running because it will cause vehicle breakdown. In commercial vehicle segment, vehicle breakdown means delay in freight delivery which results in huge loss to costumer. Therefore, while designing steering components one should consider all the possible loadings condition those are possible. But, it can’t be done through theoretical calculation. Therefore, physical tests have to be carried out to validate design of steering system, which is very costly & time-consuming process.

In today’s automobile industry refined NVH performance is a key feature and of high importance governing occupant comfort and overall quality impression of vehicle. In this paper interior noise and vibration measurement is done on one of the light truck and few dominant low frequency noise booms were observed in operation range. Modal analysis was done for the cabin at virtual as well as experimental level and few modes were found close to these noise booms. Vibrations were measured across the cabin mounts and it was found that the isolation of front mounts is not effective at lower frequencies. Taking this as an input, the mount design was modified to shift the natural frequency and hence improve the isolation behavior at the lowest dominant frequency. This was followed by static and dynamic measurement of the mounts at test rig level to characterize the dynamic performance and stiffness conclusion.

At the time of invention of road coaches, the vehicle consisted only of an axle with wheels and a body attached. Smooth roads were built for a better ride comfort however they were not consistent. The road coaches were too bumpy and uncomfortable for the passenger along with the driver who was not able to control the vehicle. That's why the engineers had to shift their attention to the suspension system for a better ride comfort and handling. The technology has advanced with time so as the suspension system. Rubber ended type leaf spring is one of the suspension system types available in the industry. The main function of a suspension in order of importance is as below: 1 Acts as a cushioning device ensuring the comfort of the driver and passengers; 2 Maximizes the contact between the tires and the road surface to provide steering stability with good handling; 3 Protects the vehicle itself and any cargo or luggage from damage and wear.

Many methods have been developed to evaluate the fatigue life of structures when the joints are as per ideal case. But if the joints are loosening, it leads to increase in loading on the other members which causes failures. Most commonly in commercial vehicle segment welding joint & bolting joints are most popular ones. It is very easy to find out bolts strength & loosening effect in static conditions. But when vehicle is moving (i.e. dynamic condition), same method cannot be used. For this we have developed methodology to predict the bolts loosening in dynamic condition using vibration data. Similarly, loading may differ on the structural members if the welds are failing in dynamic conditions. To overcome this problem, in our organization we have a solution. Of course to simulate welding failures fatigue analysis is mandatory. We are using notch-stress approach for evaluating the welding strength of the joint.

Crankshaft is one of the critical components of an engine (5C: cylinder head, connecting rod, crankshaft, camshaft and cylinder block). It is subjected to repetitive and dynamic loads due to cyclic operation of an engine, inertia forces due to uneven mass distribution with failure zones as fillets and holes in journal locations. Fatigue is most common cause in failure of the crankshaft. Its failure will cause serious damage to the engine so its reliability verification must be performed. The load is applied as per the firing order of the cylinder for 2 revolutions of crankshaft, to cover firing condition of each cylinder. Loads with respect to crank angle or time are applied at respective locations and results are taken on 360 steps for 2 complete revolutions of crank. The topic was chosen because of increasing interest in higher payloads, lower weight, higher efficiency and shorter load cycles in crankshaft equipment.

During the last few decades, concerns have grown on the negative effects that diesel particulate matter has on health. Because of this, particulate emissions were subjected to restrictions and various emission-reduction technologies were developed. It is ironic that some of these technologies led to reductions in the legislated total particulate mass while neglecting the number of particles. Focusing on the mass is not necessarily correct, because it might well be that not the mass but the number of particles and the characteristics of them (size, composition) have a higher impact on health. During the diesel engine combustion process, soot particles are produced which is very harmful for the atmosphere. Particulate matter is composed of much organic and inorganic composition which was analyzed after the optimization of SCR and EGR engine out.

A propeller shaft is a mechanical component of drive train that connects transmission to drive wheels/axle with the goal to transfer rotation and torque. It is used when the direct connection between transmission and drive axle is not possible due to large distance between their respective assigned design spaces. In commercial vehicles especially in heavy duty (GVW/GCW>15 tons) a single piece propeller shaft is seldom used due to its inherent disadvantages and therefore, most if not all, of the setups consists of multiple pieces of propeller shaft which are directly mounted on to frame cross members with the help of mounting brackets. As such the mounting bracket assembly undergoes various dynamic and static loading conditions and should be able to withstand these loads. This paper will focus on the FEA analysis of propeller shaft mounting assembly system. Furthermore, these results will be correlated with physical tests results collected from test rig and physical vehicle testing.

In response to Federal Motor Vehicle Safety Standard 108, Side Marker lamps were equipped in both passenger and commercial vehicles. Side marker lights are designed to provide clear visibility and vehicle identification from side way to other drivers/passersby vehicles traveling in perpendicular directions. But in case of harness failure/any malfunctioning/improper maintenance post damages etc., the side marker lamp does not illuminate when it is critically required. This causes serious accidents or loss of human beings as well. Convention side markers are powered by vehicle battery; a solar side-marker operates independently using a photometric switch that activates the light at sunset using stored solar energy. This device mainly works on natural light intensity when it lowers than specific value, the solar energy stored inside device will automatically ignite the side markers, irrespective of manual human intervention to switch it on.

Engine down speeding is rapidly picking up momentum in many segment of world market. Numerous engine down speeding packages from OEM have been tailored to take advantage of the increased efficiencies associated with engine down speeding. Running engine at lower rpm has numerous advantages. The most obvious of these is reduced fuel consumption, since the engine can spend more time running within its optimum efficiency range. By down speeding, the engine is made to run at low speeds and with high torques. For the same power, the engine is operated at higher specific load- Brake Mean Effective pressure (BMEP) which results in higher efficiency and reduced fuel consumption-Brake Specific Fuel Consumption (BSFC). The reasons for increased fuel efficiency are reduced engine friction due to low piston speeds, reduced relative heat transfer and increased thermodynamic efficiency.

In order to stand apart from the competition, there is an ever growing demand in Indian commercial vehicle segments to reach higher fuel economy while achieving the emission goals set by the BS-VI norms. With emissions standard set by BS-VI, novel techniques to improve fuel efficiency have to be considered that have least impact with respect to NOx and soot emissions. The optimization of exhaust and intake valve lifts with respect to engine speed, technology commonly known as Variable Valve Lift and Timing (VVT/VVL), has been implemented in many passenger vehicles propelled by gasoline engine. The aim of this work is do initial assessment of utilizing the VVL method on a LMD commercial vehicle diesel engine. A 3.8 litre BS-VI turbocharged EGR engine is used for this study. Valve lift and timing optimization for better fuel efficiency at rated power engine speed is carried out by using one-dimensional thermodynamic simulation software AVL BOOST.

Demand for electrically driven vehicles has increased significantly in recent years, due to its subsidized rate, economical operation and environmentally friendly features. If discussed about India, the sales have increased by 174% in a single year. This drastic jump in sales has encouraged the current automobile manufacturers to come up with more and more electric-driven vehicle platforms in a crunch time frame. And to fulfill these requirements, manufacturers have to work a lot to introduce new technologies like E-axle, which can be space effective, less expensive and easy to assemble. But the introduction of such new technologies brings an even bigger requirement for new validation methodologies, and in the case of electric vehicles (EV) where the development time has been very less, as brought a bigger challenge of more dependency on virtual simulation.

Proper sealing of an engine is very important parameter in an engine design. Even small amount of gas leakage from the engine can affect the overall performance of the engine during operation. There are two important factors in enhancing the efficiency of the sealing of the gasket are right tightening torque of bolts & gasket design. In this study, both the distribution of the contact pressure on the gasket, and the stresses of the cylinder head at different loading conditions, such as cold assembly, hot assembly, cold start, and hot firing, is simulated by commercial tool, based on the finite element method (FEM). The results shows that the efficiency of the sealing of the cylinder head gasket depends on the tightening torque of the hold-down bolts, without taking into consideration any thermal load resulting from the temperature distribution in the cylinder head.

As the commercial vehicle engine heads towards the next generation of stringent emissions and fuel economy targets, all aspects of the internal combustion engine are subject to close scrutiny. Inherently, ICE’s are very inefficient, with efficiency varying between 18 ~ 40%. This efficiency is a function of friction losses, pumping losses and wasted heat. Currently, automotive OEM’s globally are hard at work trying to attack these issues with various solutions to achieve incremental gains. The leading trend is getting more power from less space, also known as downsizing. Due to the importance of downsizing, direct injection and other technologies, it is imperative to highlight another key area, where OEM’s are expanding their limits to gain those extra few kilometers per liter of fuel i.e. weight reduction. From an emissions perspective, it is estimated that every 50 kg of weight reduced from an average 1,500 kg vehicle cuts CO2 emissions by 4 ~ 5 grams.

Downsizing and Light weighting is the latest trend in the automotive industry to achieve more fuel efficient, compact and cost effective design of vehicles. Powertrain components compromise of more than 45% of the total vehicle weight. Automakers are putting significant efforts to reduce the weight of power train components. Integrated design of aluminum Engine Head and Intake manifold has been successfully implemented. Now currently we have identified the gear box housings for downsizing in light duty trucks i.e. Existing light duty trucks Cast Iron transmission. This design has been successfully modified with integrated clutch housing and transmission housing, using lightweight aluminum as the new material, using simulation tools. This lead to weight savings of up to 30% and cost savings of 20-25% as compared to existing cast iron designs. Using an integrated design reduces the assembly cost, makes the design more compact and gives better weight balance.

Passenger vehicles are used as one of the frequently used and versatile mode of transport. Commercial buses cater to short to long distance travel for city as well as highway applications. Thus, passenger ride comfort becomes paramount for the salability of the vehicle. Generally, it is observed that the rear seat experiences the worst ride comfort characteristics due to rear overhang and pitching characteristics of buses. Therefore the objective of this project is to improve the rear seat vibrations of passenger bus by tuning damper characteristics. Shock absorbers, being a low cost and easily interchangeable component is tuned first before optimizing other suspension parameters. The methodology is as follows: first, a 4 degree of freedom mathematical model is created on MATLAB Simulink R2015a environment. Time domain data is obtained by road load data analysis and used as an input for the mathematical model.

With the improvement of standard of living, air conditioning has widely been applied in buses. However, in air conditioning buses air distribution is still needs to be improved, One of the main reasons for this sub-quality comfort is two air flow louvers arrangement for 3x2 layout air conditioner buses. Air conditioning buses hatrack louvers are an integral part in providing comfort to passengers. General trend of the numbers of louvers provided to passengers is two louvers for three seats. Disadvantage of having conventional two louvers is that, there is always one passenger left with no option of directing air towards that person. This lead to an opportunity to design three louvers type hatrack instated of conventional two louvers hatrack, for 3x2 seating layout of buses. This way all three passengers can control the louvers for their own comfort and mass of air flow is sufficient for third passenger as well.

Air motion in a cylinder in a compression ignition engine affects on mixing of air-fuel, quality of combustion and emission produced. With upcoming stringent norms for diesel engines, it is necessary to enhance air-fuel mixing for proper combustion. Swirl and tumble are forms of air motion. Swirl is a rotational motion of a bulk mass within cylinder. Swirl is generated by shaping and countering intake manifold and valve ports. Swirl enhances air-fuel mixing and helps to spread flame-front during combustion. The objective of this paper is to analyze the impact of different swirl ratios on NOx and soot emission characteristics inside the cylinder of a DI Diesel engine. The effects of different geometrical parameters of helical port were studied and the swirl ratios are optimized by optimizing the geometrical parameter of helical port. This can be done by different manufacturing, polishing and grinding processes.

The discussed invention is centered on the evaporative cooling of a vehicle cabin, introducing a novel concept of humidity control. Unlike conventional Air Conditioning (AC) systems that operate on the Vapor Compression Refrigeration Cycle (VCRC), which tend to be costly and contribute to higher fuel consumption due to the engine-driven compressor in automobiles, there is currently no other Original Equipment Manufacturer (OEM) fitted cabin cooling option available to address this issue. This paper introduces the idea of a humidity-controlled evaporative cooler. The objective of humidity control is achieved through a controller unit that receives feedback from a humidity sensor, subsequently regulating the operation of the water pump. The ambient air is passed through a humidified honeycomb pad, cooling through the principle of evaporation. To prevent any leftover water droplets from entering the cabin, a polyester nonwoven filter has been integrated into the system.

The new idea discussed in this paper pertains to the carrier mechanism for spare wheels in heavy commercial vehicles. Typically, these vehicles are equipped with a spare wheel carrier featuring a rope mechanism for loading and unloading the spare wheel. The conventional placement of this system is on the side of the frame/chassis or within the limits of the side member. However, the tire-changing process in this system is often arduous, time-consuming, and requires significant effort. The proposed invention addresses these challenges by repositioning the spare wheel to a vertical orientation, facilitating easier access to its bolts and simplifying the removal process from the mountings. Furthermore, the innovation incorporates a three-way actuation system (Air Actuated, Electric motor-driven, or Hydraulic cylinder actuated mechanisms), thereby reducing the need for manual effort and enhancing driver comfort.