Refine Your Search

Date

Date

Topic

Topic

Production Materials properties Forming Committee on Automotive Rubber Specs

Search Results

Viewing 1 to 20 of 63
123Next >Last >>
Sort by title
Standard

Thermoset Elastomer Specification System
2009-09-10
HISTORICAL
J2884_200909
This document provides a method/ procedure for specifying the properties of vulcanized elastomeric materials (natural rubber or synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. This document covers materials that do not contain any re-use; recycled; or regrind materials unless otherwise agreed to by manufacturer and end user. The use of such materials, including maximum % must be specified using a “Z” suffix. This classification system covers thermoset High Consistency Elastomers (HCE’s) only. Thermoplastic Elastomer (TPE) materials are classified using SAE J2558. Silicone Formed In Place Gasket (FIPG) systems such as Room Temperature Vulcanized (RTV) Silicones, and Liquid Silicone Rubber (LSR) systems are classified using ASTM F 2468.
Standard

Thermoset Elastomer Specification System
2014-06-27
HISTORICAL
J2884_201406
This document provides a method/procedure for specifying the properties of vulcanized elastomeric materials (natural rubber or synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. This document covers materials that do not contain any re-use; recycled; or regrind materials unless otherwise agreed to by manufacturer and end user. The use of such materials, including maximum % must be specified using a “Z” suffix. This classification system covers thermoset High Consistency Elastomers (HCE’s) only. Thermoplastic Elastomer (TPE) materials are classified using SAE J2558. Silicone Formed In Place Gasket (FIPG) systems such as Room Temperature Vulcanized (RTV) Silicones, and Liquid Silicone Rubber (LSR) systems are classified using ASTM F 2468.
Standard

Thermoset Elastomer Specification System
2023-06-02
CURRENT
J2884_202306
This document provides a method/procedure for specifying the properties of vulcanized elastomeric materials (natural rubber or synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. This document covers materials that do not contain any re-use, recycled, or regrind materials unless otherwise agreed to by manufacturer and end user. The use of such materials, including maximum percent, must be specified using a “Z” suffix. This classification system covers thermoset High Consistency Elastomers (HCEs) only. Thermoplastic Elastomer (TPE) materials are classified using SAE J2558. Silicone Formed In Place Gasket (FIPG) systems such as Room Temperature Vulcanized (RTV) Silicones, and Liquid Silicone Rubber (LSR) systems are classified using ASTM F2468.
Standard

Thermoplastic Elastomer Classification System
2003-09-15
HISTORICAL
J3000_200309
This classification system tabulates the properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications. This classification system is based on the premise that the properties of TPEs can be arranged into characteristic material designations. These designations are determined by type, based on resistance to heat aging; and class, based on resistance to volume change resulting from oil immersion. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the properties of all TPEs. In all cases where provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. This classification is based on SI units.
Standard

Thermoplastic Elastomer Classification System
1997-08-01
HISTORICAL
J3000_199708
This classification system tabulates the properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications. This classification system is based on the premise that the properties of TPEs can be arranged into characteristic material designations. These designations are determined by type, based on resistance to heat aging; and class, based on resistance to volume change resulting from oil immersion. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the properties of all TPEs. In all cases where provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. This classification is based on SI units.
Standard

THERMOPLASTIC ELASTOMER CLASSIFICATION SYSTEM
1997-01-21
HISTORICAL
J3000_199701
This classification system tabulates the properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications. This classification system is based on the premise that the properties of TPEs can be arranged into characteristic material designations. These designations are determined by type, based on resistance to heat aging; and class, based on resistance to volume change resulting from oil immersion. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the properties of all TPEs. In all cases where provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. This classification is based on SI units.
Standard

THERMOPLASTIC ELASTOMER CLASSIFICATION SYSTEM
1993-06-10
HISTORICAL
J3000_199306
This classification system tabulates the properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications. This classification system is based on the premise that the properties of TPEs can be arranged into characteristic material designations. These designations are determined by type, based on resistance to heat aging; and class, based on resistance to volume change resulting from oil immersion. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the properties of all TPEs. In all cases where provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. This classification is based on SI units.
Standard

THERMOPLASTIC ELASTOMER CLASSIFICATION SYSTEM
1992-06-01
HISTORICAL
J3000_199206
This classification system tabulates the properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications. This classification system is based on the premise that the properties of TPEs can be arranged into characteristic material designations. These designations are determined by type, based on resistance to heat aging; and class, based on resistance to volume change resulting from oil immersion. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the properties of all TPEs. In all cases where provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. This classification is based on SI units.
Standard

Standard Reference Elastomers (SREs) for Characterizing the Effect of Liquids on Vulcanized Rubbers
2023-05-10
CURRENT
J2643_202305
This SAE Standard specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. The appendices contain the standard reference elastomer formulas. The property changes of the SRE in contact with the indicated fluid under specified test conditions are the responsibility of the user. See 7.3 and Table 1. This standard is not designed to provide formulations of elastomeric product compositions for actual service.
Standard

Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized Rubbers
2004-08-10
HISTORICAL
J2643_200408
This SAE Standard specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. The annexes contain the standard reference elastomer formulas. The property changes of the SRE in contact with the indicated fluid under specified test conditions are the responsibility of the user. See 7.3 and Table 1. This standard is not designed to provide formulations of elastomeric product compositions for actual service.
Standard

Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized Rubbers
2013-12-17
HISTORICAL
J2643_201312
This SAE Standard specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. The annexes contain the standard reference elastomer formulas. The property changes of the SRE in contact with the indicated fluid under specified test conditions are the responsibility of the user. See 7.3 and Table 1. This standard is not designed to provide formulations of elastomeric product compositions for actual service.
Standard

Sponge and Expanded Cellular Rubber Products1
2000-12-01
HISTORICAL
J18_200012
Except as otherwise specified in these methods, the following ASTM test methods and the various test methods in Table 3, applicable in general to vulcanized rubber, shall be complied with as required and are hereby made a part of these methods:
Standard

Sponge and Expanded Cellular Rubber Products1
2002-04-19
HISTORICAL
J18_200204
Except as otherwise specified in these methods, the following ASTM test methods and the various test methods in Table 3, applicable in general to vulcanized rubber, shall be complied with as required and are hereby made a part of these methods:
Standard

SPONGE- AND EXPANDED CELLULAR-RUBBER PRODUCTS–SAE J18 DEC79
1979-12-01
HISTORICAL
J18_197912
These specifications and methods of testing apply to cellular-rubber products known as sponge rubbers and expanded rubbers, but do not apply to latex foam rubbers. The base material used in their manufacture may be natural rubber, synthetic rubber, or rubberlike materials, alone or in combination. Ebonite cellular rubbers are not included. Extruded or molded shapes or sizes too small for cutting standard test specimens are difficult to classify or test by these methods and will usually require special testing procedures. In cases of conflict between the provisions of this general specification and those of a detailed specification, the latter shall take precedence. References to these methods for testing cellular-rubber products should specifically state the particular test or tests desired.
Standard

SPONGE- AND EXPANDED CELLULAR-RUBBER PRODUCTS1
1988-08-01
HISTORICAL
J18_198808
This specification covers flexible cellular rubber products known as sponge rubbers and expanded rubbers but does not apply to latex foam rubbers. The base material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber or rubber-like materials, alone or in combination. Ebonite cellular rubbers are not included.
Standard

Latex-Dipped Goods and Coatings for Automotive Applications
1997-08-01
HISTORICAL
J19_199708
These specifications cover dipped goods and coatings made from compounded latex. Products manufactured from this material include boots, coated clips, coated sponge parts, and coated fabrics for automotive applications.
123Next >Last >>
X