This standard establishes basic design criteria including preferred bend radii, straight lengths between bends, flattening and surface conditions in the bend area. Also included is a table of preferred tubing sizes and wall thicknesses and a formula for determining a minimum bend radius for a given tube diameter.
This SAE Aerospace Standard describes the test methods for flexible PTFE hose and hose assemblies used in aircraft fluid systems in the pressure and temperature ranges defined in MA2001 (ISO 6771). It applies to the hose and the hose coupling. The tests and assembly requirements for the connecting end fitting are covered in the procurement specification. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Appendix A.
This SAE Aerospace Standard (AS) describes the test methods for flexible PTFE hose and hose assemblies used in aircraft fluid systems in the pressure and temperature ranges defined in specific procurement specifications. It applies to the hose and the hose coupling. The tests and assembly requirements for the connecting end fitting are covered in the procurement specification. This document applies each time that it is referred to in a procurement specification or other definition document.
This SAE Aerospace Standard (AS) specifies test methods for fitting assemblies used in aircraft fluid systems in the pressure classes B, D, and E, and in temperature Types I, II, and III of MA 2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
This SAE Aerospace Standard (AS) specifies test methods for fitting assemblies used in aircraft fluid systems in the pressure classes B, D, and E (1500 psi, 3000 psi, and 4000 psi), and in temperature Types I, II, and III (-65 to 160 °F, -65 to 275 °F, and -65 to 400 °F) of AS2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
This SAE Aerospace Standard (AS) specifies test methods for tube-fitting assemblies used in aircraft fluid systems in the following pressure classes: B (1500 psi or 10500 kPa), D (3000 psi or 21000 kPa), E (4000 psi or 28000 kPa), and J (5000 psi or 35000 kPa) and in temperature types I (-65 to 160 °F or -55 to 70 °C), II (-65 to 275 °F or -55 to 135 °C), and III (-65 to 400 °F or -55 to 200 °C) of AS2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
This SAE Aerospace Standard (AS) specifies test methods for tube-fitting assemblies used in aircraft fluid systems in the following pressure classes: B (1500 psi or 10500 kPa), D (3000 psi or 21000 kPa), E (4000 psi or 28000 kPa), and J (5000 psi or 35000 kPa) and in temperature types I (-65 to 160 °F or -55 to 70 °C), II (-65 to 275 °F or -55 to 135 °C), and III (-65 to 400 °F or -55 to 200 °C) of AS2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
This standard describes the test methods for flexible TFE hose and hose assemblies used in aircraft fluid systems in the pressure and temperature ranges covered by pressure classes B, D and E, and temperature types I, II and III of MA 2001 - ISO 6771. It applies to the hose and the hose coupling. The tests and assembly requirements for the connecting end fitting are covered in the procurement specification. This standard applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Appendix A.
This specification defines the requirements for A286 CRES T-bolts and eye bolts, with room temperature tensile strength of a minimum of 160000 psi, for use with clamps and V-band couplings at 1000 °F maximum ambient temperature.
This SAE Aerospace Information Report (AIR) establishes the specifications and descriptions of the critical components and operational guidelines for the standard hydraulic impulse machine for testing hydraulic hose assemblies, tubing, coils, fittings and similar fluid system components. This revision to the AIR1228 provides a description of a system that meets the requirements for specifications including: AS603, AS4265, and ARP1383. This impulse system utilizes closed loop servo control with specifically generated command signal waveforms. Data accuracy and integrity are emphasized in this revision. Knowing the uncertainty of the pressure measurement is important whether using a resonator tube system, as described in the original release of this document, or a closed-loop systems as described in this release. The accuracy of the data measurement system and consistency of the pressure waveform are fundamental to test validity, regardless of the system type.
This SAE Aerospace Recommended Practice (ARP) provides a standard reference list of code designations to be applied to the various sleeves used on hose assemblies when preparing related "AS" specifications and part standards.