Search Results

Standard

Tape and Sheet, Adhesive, Rubber and Cork Composition

2016-07-06

CURRENT

AMST6841A

This specification covers one type of tape and sheet for use in the installation of windshields, panels, and windows in cabins and cockpits of aircraft.

Standard

Surface Treatment of Polytetrafluoroethylene (PTFE) Preparation for Bonding

2015-01-08

HISTORICAL

AMS2491F

This specification covers the engineering requirements for preparing surfaces of polytetrafluoroethylene (PTFE) for bonding and the properties resulting from the treatment.

Standard

Surface Treatment of Polytetrafluoroethylene (PTFE) Preparation for Bonding

2009-09-28

HISTORICAL

AMS2491E

This specification covers the engineering requirements for preparing surfaces of polytetrafluoroethylene (PTFE) for bonding and the properties resulting from the treatment.

Standard

Surface Treatment of Polytetrafluoroethylene (PTFE) Preparation for Bonding

2022-07-19

CURRENT

AMS2491G

This specification covers the engineering requirements for preparing surfaces of both virgin and filled polytetrafluoroethylene (PTFE) materials for bonding and the properties resulting from the treatment.

Standard

Shims, Molded, Filled Resin Compound and Sheet Prepreg

1998-07-01

HISTORICAL

AMSS83474

This specification covers the requirements for filled, resinous thermosetting compound and sheet prepreg to fabricate shims for use during assembly of aircraft components and parts.

Standard

SURFACE PREPARATION AND PRIMING OF ALUMINUM ALLOY PARTS FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING Phosphoric Acid Anodizing

1978-04-01

HISTORICAL

ARP1524

This recommended practice describes the processing system and techniques for the surface preparation and priming of aluminum alloy parts for structural adhesive bonding to achieve optimum bondline durability, corrosion resistance, and manufacturing producibility.

Standard

Rubber Cellular Sheet, Molded and Hand-Built Shapes; Latex Foam

1998-06-01

HISTORICAL

AMSR5001

This specification covers cored and uncored open cell latex foam rubber sheets, molded and hand-built shapes having good shock-absorbing, vibration-damping, and comfort cushioning characteristics (see 6.1).

Standard

Rubber Cellular Sheet, Molded and Hand-Built Shapes; Latex Foam

2015-04-13

CURRENT

AMSR5001A

This specification covers cored and uncored open cell latex foam rubber sheets, molded and hand- built shapes having good shock-absorbing, vibration-damping, and comfort cushioning characteristics (see 6.1).

Standard

Polyvinyl Chloride (PVC) Plastic Extrusions High Temperature, Flexible

1998-12-01

HISTORICAL

AMS3631C

This specification covers a polyvinyl chloride (PVC) plastic in the form of extruded tubing, cord, tape, and shapes.

Standard

Polyvinyl Chloride (PVC) Plastic Extrusions High Temperature, Flexible

2011-11-07

CURRENT

AMS3631D

This specification covers a polyvinyl chloride (PVC) plastic in the form of extruded tubing, cord, tape, and shapes.

Standard

Polytetrafluoroethylene (PTFE) Sheet, Molded Premium Grade, As Sintered

2012-02-09

CURRENT

AMS3669G

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of sheet, manufactured by compression molding and sintering.

Standard

Polytetrafluoroethylene (PTFE) Sheet, Molded Premium Grade, As Sintered

2010-06-16

HISTORICAL

AMS3669F

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of sheet, manufactured by compression molding and sintering.

Standard

Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components

2006-06-20

HISTORICAL

AMS3678B

This specification covers several grades of virgin polytetrafluoroethylene (PTFE) resin which may be compounded with pigment and fillers in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

Standard

Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components

2004-11-16

HISTORICAL

AMS3678A

This specification covers several grades of virgin polytetrafluoroethylene (PTFE) resin which may be compounded with pigment and fillers in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

Standard

Polytetrafluoroethylene (PTFE) Moldings Premium Grade, As Sintered

2010-05-17

HISTORICAL

AMS3668D

This specification covers two types of virgin, unfilled polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in length, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm).

Standard

Polytetrafluoroethylene (PTFE) Moldings Premium Grade, As Sintered

2011-08-25

CURRENT

AMS3668E

This specification covers two types of virgin, unfilled polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in length, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm).

Standard

Polytetrafluoroethylene (PTFE) Moldings General Purpose Grade, As Sintered

2010-06-16

HISTORICAL

AMS3660D

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in dimension parallel to the direction of applied molding pressure, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm).

Standard

Polytetrafluoroethylene (PTFE) Moldings General Purpose Grade, As Sintered

2011-08-25

CURRENT

AMS3660E

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in dimension parallel to the direction of applied molding pressure, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm).

Standard

Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected

2010-05-17

HISTORICAL

AMS3658E

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of extruded rods, tubes, and profiles.

Standard

Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected

2011-08-25

CURRENT

AMS3658F

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of extruded rods, tubes, and profiles.