Search Results

Standard

Unauthorized Starting or Movement of Machines

2012-05-02

CURRENT

J1083_201205

This SAE Recommended Practice applies to construction, general purpose industrial, forestry, and specialized mining machinery as categorized in SAE J1116. It describes the machine components and systems that should be disconnected, secured, or otherwise rendered inoperative. Deterrent systems or devices covered by this recommended practice are to be used when the machine is shut down per the manufacturer's shut down instructions. It is not the intent of this recommended practice to protect the machine or the authorized machine operator, or to protect against abuse, destructive vandalism, or theft.

Standard

Tire Guards for Operator Protection—Earthmoving Haulage Machines

1999-05-24

HISTORICAL

J321_199905

This SAE Standard establishes a criteria for a minimum zone of protection for the operator of the machine and establishes certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h. Earthmoving machines covered by this document are dumpers and tractor-scrapers as identified in SAE J/ISO 6165.

Standard

Tire Guards for Operator Protection--Earthmoving Haulage Machines

2008-04-14

CURRENT

J321_200804

This SAE Standard establishes a criteria for a minimum zone of protection for the operator of the machine and establishes certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h. Earthmoving machines covered by this document are dumpers and tractor-scrapers as identified in SAE J/ISO 6165.

Standard

TIRE GUARDS FOR PROTECTION OF OPERATOR OF EARTHMOVING HAULAGE MACHINES

1978-04-01

HISTORICAL

J321B_197804

This recommended practice establishes a minimum zone of protection for the operator of the machine and certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h (15 mph). Earthmoving machines covered by this recommended practice are dumpers, and tractor-scrapers as identified in SAE J1057a (June, 1975).

Standard

TIRE GUARDS FOR PROTECTION OF OPERATOR OF EARTHMOVING HAULAGE MACHINES

1978-04-01

HISTORICAL

J321_197804

This recommended practice establishes a minimum zone of protection for the operator of the machine and certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h (15 mph). Earthmoving machines covered by this recommended practice are dumpers, and tractor-scrapers as identified in SAE J1057a (June, 1975).

Standard

Steering for Off-Road, Rubber-Tired Machines

2019-07-29

CURRENT

J1511_201907

This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. Only the following machine categories in SAE J1116 are included in the scope of this document. a. Earthmoving b. Other than earthmoving: except rollers and compactors c. General purpose industrial d. Forestry e. Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a. Manual steering b. Power-assisted steering c. Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included.

Standard

Steering Frame Lock for Articulated Loaders and Tractors

2002-12-20

HISTORICAL

J276_200212

This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO 6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.

Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS

1981-06-01

HISTORICAL

J276_198106

Structural requirements, selected mounting requirements, and test procedures are established for articulated frame wheel loaders and articulated frame wheel tractors as defined in SAE J1057a (June, 1975).

Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS

1992-11-01

HISTORICAL

J276_199211

This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J1057, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.

Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS

1986-05-01

HISTORICAL

J276_198605

Structural requirements, selected mounting requirements, and test procedures are established for articulated frame wheel loaders and articulated frame wheel tractors as defined in SAE J1057a (June, 1975).

Standard

STEERING FOR OFF-ROAD, RUBBER-TIRED MACHINES TECHNICALLY EQUIVALENT TO ISO 5010 FOR OFF-ROAD MACHINERY

1990-10-01

HISTORICAL

J1511_199010

This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. The following machine categories in J1116 are included in the scope of this document: a Earthmoving b Other than earthmoving: except rollers and compactors c General purpose industrial d Forestry e Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a Manual steering b Power-assisted steering c Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included.

Standard

STEERING FOR OFF-ROAD, RUBBER-TIRED MACHINES

1994-02-01

HISTORICAL

J1511_199402

This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. Only the following machine categories in SAE J1116 are included in the scope of this document. a Earthmoving b Other than earthmoving: except rollers and compactors c General purpose industrial d Forestry e Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a Manual steering b Power-assisted steering c Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included.

Standard

SHIELDING OF STARTER SYSTEM ENERGIZATION

1986-12-01

HISTORICAL

J1493_198612

Standard

SHIELDING OF STARTER SYSTEM ENERGIZATION

1991-10-04

HISTORICAL

J1493_199110

This SAE Standard specifies the requirements to prevent inadvertent and to discourage deliberate electrical connection at the starter motor solenoid or starter relay which may result in the starter pinion engaging the ring gear. This document applies to off-road, self-propelled work machines, as identified in SAE J1116, which have the potential of powered movement as a direct result of the starter pinion engaging the ring gear.

Standard

SHIELDING OF STARTER SYSTEM ENERGIZATION

1997-11-01

HISTORICAL

J1493_199711

This SAE Standard specifies the requirements to help prevent inadvertent and to discourage deliberate electrical connection at the starter motor solenoid or starter relay which may result in the starter pinion engaging the ring gear. This document applies to off-road, self-propelled work machines, as identified in SAE J1116, which have the potential of powered movement as a direct result of the starter pinion engaging the ring gear.

Standard

SAFETY FOR INDUSTRIAL WHEELED EQUIPMENT

1973-05-01

HISTORICAL

J98_197305

Standard

SAFETY FOR INDUSTRIAL WHEELED EQUIPMENT

1980-12-01

HISTORICAL

J98_198012

Standard

SAFETY FOR INDUSTRIAL WHEELED EQUIPMENT

1986-05-01

HISTORICAL

J98_198605

Standard

Personnel Protection - Skid Steer Loaders

2013-03-26

HISTORICAL

J1388_201303

This SAE Standard is intended to provide personnel protection guidelines for skid steer loaders. This document is intended as a guide towards standard practice, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This document provides performance criteria for newly manufactured loaders and it is not intended for in-service machines.

Standard

Personnel Protection - Skid Steer Loaders

2019-07-03

CURRENT

J1388_201907

This SAE Standard is intended to provide personnel protection guidelines for skid steer loaders. This document is intended as a guide towards standard practice, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This document provides performance criteria for newly manufactured loaders and it is not intended for in-service machines.