Search Results

This document reviews briefly the subject of woven metal screens. Conditions that can promote damaging corrosion in stainless steel filter screens are discussed and recommendations are listed for minimizing corrosion damage. This is a general document only; for specific applications it is suggested that the reader refer to the technical literature, and selected references listed below.

This document reviews briefly the subject of woven metal screens. Conditions that can promote damaging corrosion in stainless steel filter screens are discussed and recommendations are listed for minimizing corrosion damage. This is a general document only; for specific applications it is suggested that the reader refer to the technical literature, and selected references listed below.

This AIR discusses the nature, method of manufacture and chemistry of fine wire meshes of the type used for filtration and similar applications, and how this information may be utilized in setting up a quality control program to insure reliability of meshes used for such applications.

This ARP describes a gravimetric method for the determination of particulate contaminant in hydraulic fluids by the control filter technique. NOTE: With this method, detectable contamination levels down to 0.2 mg (7.0 × 10-6 ounces) per sample can be obtained with a standard deviation of ±0.1 mg (±3.5 × 10-6 ounces).

This ARP describes procedure for determining the counting and sizing accuracy for an automatic liquid-borne particle counter (APC). This procedure is used in conjunction with a suspension of precisely sized spherical particles.

This report describes a mathematical model which can be used to analyze particle count data. Particle counts which fit the model can be graphically displayed. converted from one counting size-frequency range to another, and extrapolated to estimate counts beyond the measured range. Derivation, applications and calculations are described.

This Aerospace Recommended Practice covers the calibration and verification of automatic liquid-borne particle counter for the determination of the concentration by number and size distribution of particles in aerospace liquids. This method is intended for the standardization of automatic liquid-borne particle counting instrumentation.

This document discusses the relative merits of the physical and chemical properties of hydraulic fluids in relation to the aerospace hydraulic system design, and the related materials compatibility. The discussion in this report applies both to hydrocarbon and phosphate ester based aircraft hydraulic fluids. In some cases, numerical limits are suggested, but, in general, the significance and effect of a property is noted qualitatively.

This document discusses the relative merits of the physical and chemical properties of hydraulic fluids in relation to the aerospace hydraulic system design, and the related materials compatibility. The discussion in this report applies both to hydrocarbon and phosphate ester based aircraft hydraulic fluids. In some cases, numerical limits are suggested, but, in general, the significance and effect of a property is noted qualitatively.

This document discusses the relative merits of the properties of hydrocarbon-based hydraulic fluid in relation to the fluid formulation, aerospace hydraulic system design and the related materials compatibility. In some cases, numerical limits are suggested, but, in general, the effect of a property is noted qualitatively. The properties of the fluid must be considered in the design of a hydraulic system, but it is possible to design a system to be less sensitive, or more robust, to a particular fluid property. For this reason, the property of the hydraulic fluid must be weighed for each individual hydraulic system, taking into account the system's basic design, function and environment, as well as the fluid toxicity and disposal issues. Besides the hydraulic system itself, ground handling and servicing needs of the system must also be considered. The only absolute characteristic of a hydraulic fluid is that it be a liquid throughout the range of use.

This document discusses the relative merits of the properties of hydrocarbon-based hydraulic fluid in relation to the fluid formulation, aerospace hydraulic system design and the related materials compatibility. In some cases, numerical limits are suggested, but, in general, the effect of a property is noted qualitatively. The properties of the fluid must be considered in the design of a hydraulic system, but it is possible to design a system to be less sensitive, or more robust, to a particular fluid property. For this reason, the property of the hydraulic fluid must be weighed for each individual hydraulic system, taking into account the system's basic design, function and environment, as well as the fluid toxicity and disposal issues. Besides the hydraulic system itself, ground handling and servicing needs of the system must also be considered. The only absolute characteristic of a hydraulic fluid is that it be a liquid throughout the range of use.

This report summarizes data relative to liquid fluids and their properties which are of interest to Aerospace Fluid Power technologists.

This report summarizes data relative to liquid fluids and their properties which are of interest to Aerospace Fluid Power technologists.

This report summarizes data relative to liquid fluids and their properties which are of interest to Aerospace Fluid Power technologists.

This document establishes the requirements for physical and chemical properties and the minimum tests to evaluate suitability of phosphate ester hydraulic fluids for use in aircraft systems where fire resistance is required. Additional tests may be specified by the qualifying agency to demonstrate compliance with their specific requirements. The "qualifying agency" will be defined herein to be the airframe manufacturer submitting certification approval for use of the fluid in a specific model airplane. Fluids meeting the requirements of this specification may be approved by a qualifying agency for use on specific airplane models. Data used to show compliance to this specification can be used by the qualifying agency to show compliance to the applicable regulations for the appropriate certifying authority; e.g., FAA, EASA, etc.

This document establishes the requirements for physical and chemical properties and the minimum tests to evaluate suitability of phosphate ester hydraulic fluids for use in aircraft systems where fire resistance is required. Additional tests may be specified by the qualifying agency to demonstrate compliance with their specific requirements. The "qualifying agency" will be defined herein to be the airframe manufacturer submitting certification approval for use of the fluid in a specific model airplane. Fluids meeting the requirements of this specification may be approved by a qualifying agency for use on specific airplane models. Data used to show compliance to this specification can be used by the qualifying agency to show compliance to the applicable regulations for the appropriate certifying authority; e.g., FAA, EASA, etc.

This SAE Aerospace Information Report (AIR) discusses the terminology, types, method of manufacture and chemistry of the fine wire meshes used for filtration of hydraulic, lubrication fuel systems, and similar applications. Information contained herein may be used for quality assurance testing to insure that a high performance filter grade wire mesh is acceptable for use in an aerospace application.

This SAE Aerospace Information Report (AIR) discusses the terminology, types, method of manufacture and chemistry of the fine wire meshes used for filtration of hydraulic, lubrication fuel systems, and similar applications. Information contained herein may be used for quality assurance testing to insure that a high performance filter grade wire mesh is acceptable for use in an aerospace application.

This SAE Aerospace Information Report (AIR) provides technical information to assist the development of specific cleaning methods for those filter elements which are designated as "cleanable" and cannot be cleaned by simple and obvious procedures.