Search Results

This test procedure is for Qualification Testing of electrically powered hydraulic or mechanically operated devices which permit a person in a manual or powered wheelchair to enter or exit a personally licensed vehicle. It establishes minimum test requirements for compliance. A lift completing the test without failure under this procedure shall be considered in compliance. The tests in Section 3 shall be done in the sequence listed.

This test procedure is for Qualification Testing of electrically powered hydraulic or mechanically operated devices which permit a person in a manual or powered wheelchair to enter or exit a personally licensed vehicle. It establishes minimum test requirements for compliance. A lift completing the test without failure under this procedure shall be considered in compliance. The tests in Section 3 shall be done in the sequence listed.

The recommendations in this SAE Information Report apply to structural integrity, performance, driveability, and serviceability of personally licensed vehicles not exceeding 10 000 lb GVWR. While many of these recommendations may have application to other vehicles, such as those used in paratransit operations, the contents of this document are not directed at these types of vehicles.

This SAE Recommended Practice establishes a uniform procedure for assuring the manufactured quality, installed utility and performance of automotive products to the relocation, alteration, replacement and/or extension of secondary controls and systems other than those provided by the vehicle manufacturer (OEM). These products are intended to provide driving capability to persons with physical disabilities. These products function as adaptive modifications to compensate for lost or reduced function in the extremities of the driver. These include, but are not limited to the following: Cruise Control; Door Locks; Gear Selector; Hazard Flasher; Headlight Beam Selector; Heater/Vent/Air Conditioner (HVAC); Horn; Ignition/Starter; Light controls; Mirrors; Parking Brake; Power Seats; Turn Signals; Power Window Controls; and Windshield Wiper/Washer and defogger; Rear Accessories (Defogger, Wiper/Washer).

This SAE Recommended Practice establishes a uniform procedure for assuring the manufactured quality, installed utility and performance of automotive products to the relocation, alteration, replacement, and/or extension of secondary controls and systems other than those provided by the vehicle manufacturer (OEM). These products are intended to provide driving capability to persons with physical disabilities. These products function as adaptive modifications to compensate for lost or reduced function in the extremities of the driver. These include, but are not limited to, the following: Cruise control; door locks; gear selector; hazard flasher; headlight beam selector; heater/vent/defroster/air conditioner (HVAC); horn; ignition/starter; light controls; mirrors; parking brake; power seats; turn signals; power window controls; and windshield wiper/washer; rear accessories (defogger, wiper/washer).

This SAE Recommended Practice establishes a uniform procedure for assuring the manufactured quality, provision for proper installation, and service performance of certain automotive products, specifically, the relocation, alteration, replacement and/or extension of secondary controls and systems. These include the following: Cruise Control; Door Locks; Gear Selector; Hazard Flasher; Headlight Beam Selector; Heater/Vent/Air Conditioner (HVAC); Horn; Ignition/Starter; Light controls; Mirrors; Parking Brake; Power Seats; Rear Accessories (Defogger, Wiper/Washer); Turn Signals; Window Regulators; and Windshield Wiper/Washer. The purpose of any Secondary control adaptation is to provide the effective use of the motor vehicle operating systems to a driver with a disability, so that he or she may drive and operate that motor vehicle with the same degree of safety as a driver who does not have a disability.

This SAE Information Report establishes a uniform procedure for assuring the manufactured quality, installed utility and performance of automotive remote steering controls other than those provided by the vehicle manufacturer (OEM). These products are intended to provide driving capability to persons with physical disabilities. The adaptive modifications seek to compensate for lost or reduced function in the extremities of the driver with a disability. Remote steering controls are designed to provide a steering input device alternative to the OEM steering wheel that either reduces the required input force, changes the required range of motion or changes the location of the steering control or any combination of the above. These controls supplement by power, other than by the driver’s own muscular efforts, the force output of the driver with a disability.

This test procedure is for qualification testing of powered gas/brake control systems to assure compliance with the Recommended Practices for these assistive devices. A powered gas/brake control system which passes all of the tests shall be considered to be in compliance with the Recommended Practices. The control shall pass all tests denoted by a “shall” in the Recommended Practice or the Recommended Test Procedure. All the results of all tests and requirements denoted by a “should” shall be noted, but failure to comply will not constitute failure to pass the test.

This test procedure is for qualification testing of powered gas/brake control systems to assure compliance with the recommended practices for these assistive devices. A powered gas/brake control system which passes all of the tests shall be considered to be in compliance with the recommended practices. The control shall pass all tests denoted by a “shall” in the recommended practice or the recommended test procedure (RTP). All the results of all tests and requirements denoted by a “should” shall be noted, but failure to comply will not constitute failure to pass the test.