Search Results

High quality rivet installation is of critical importance to the aerospace industry, and the existence of gaps between the rivet head and the countersink is undesirable. Detection of gaps traditionally involves sectioning through rivet joints. Two concerns exist for this method of evaluation: it provides data only from the sectioned plane, and it has potential to alter the gaps. X-ray computed tomography (CT) was used to validate the effectiveness of the tradition sectioning method. It was revealed that the sectioning process generally increased the size of gaps. CT images also revealed that the gaps are not necessarily uniform around the rivet.

A series of flight tests over the ocean of a four engine turboprop airplane in the cruise configuration have provided a data set for improved understanding of wake vortex physics and atmospheric interaction. An integrated database has been compiled for wake-characterization and validation of wake-vortex computational models. This paper describes the wake-vortex flight tests, the data processing, the database development and access, and results obtained from preliminary wake-characterization analysis using the data sets.

A novel method for improving the accuracy and lowering the cost of large NC drilling machines has been developed. The method employs a 3D tracking interferometer measurement system to measure and correct the position of the machine end-effector prior to each drill operation. This method eliminates many geometric and thermal errors inherent to NC drilling machines. The paper discusses the background, theory, initial implementation, test results and future enhancements of the method.

During the commercial aircraft assembly process, many interrelated installations require alignment to a common reference centerline or location to a common reference plane. A rotational laser can be used to establish a vertical, horizontal, or other desired plane orientation to serve as a common installation reference for multiple assemblies. The cargo floor installation in the lower lobe of the 777 forward section requires that three physically separate cargo floor sections be aligned to a common centerline and lie in the same horizontal plane. Two rotational lasers are used in conjunction with laser positioning equipment, digital laser targets, and conventional tooling hardware to meet the installation criteria and provide a reliable, repeatable process.

The aerospace industry uses flexible complex contoured structure in aircraft. To take advantage of advancements in engineering design, assembly methods, and inspection tools, the dimensional requirements for this kind of structure can be specified using Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5M-1994, “Dimensioning and Tolerancing.” The 1994 revision of this standard includes some new features which can be used to specify the dimensional requirements for flexible complex contoured structure, but there are no examples on how GD&T can or should be applied. This paper gives some examples how GD&T can be applied on flexible complex contoured structure and how this usage specifies the dimensional requirements for such parts.

Capacitance sensing probes have been in use for a number of years in the airframe assembly industry for characterizing diameters in straight and tapered fastener holes. A new type of capacitance probe was recently developed that simultaneously characterizes the countersink and shank diameters in holes drilled for index head rivets. The probe design and a unique methodology for a systems approach to qualifying a multi-probe inspection facility are presented in this paper.

With the increasing shift toward automation with respect to fastener installation, the need has evolved for clearer definition of the process capability of new fastener installation automation systems. In light of Engineering design requirements, and to address the process capability issue, Boeing has developed and implemented D6- 56617, a machine certification process for automated fastening of fuselage structure. This philosophy was a new approach in the following ways: 1. Previously, engineering oversight of automated fastening systems was limited to wing structure applications. 2. The process requires that process capabilities and performance of the automated machinery itself be established by test. 3. The process requires that detailed Process Control Documents be developed and followed. 4. The process links the statistical test data to the day to-day operating parameters of the machine.

At the 1990 Annual Aerospace/Airline Plating and Metal Finishing Forum, The Boeing Commercial Airplane Group presented information on boric acid/sulfuric acid anodizing (BSAA) as a replacement for chromic acid anodizing (CAA) to meet environmental regulations. This paper presents an update on the BSAA process and the status of production implementation. Background information will be reviewed including environmental issues and modifications of CAA to meet current EPA regulations. The results of BSAA process optimization, corrosion protection performance and compatibility with aircraft finishing will be given. Production implementation experience such as process control and facility requirements, including the status of BSAA for MIL-A-8625, Type IC (Anodizing, Non-chromic Acid, Meeting Type I Requirements) usage will be reviewed.

This paper addresses the steps and processes to create a full life circle of Tool Routines utilizing 3D data analysis as the driver. The paper covers the development of 3D Tool Routines for automation, the execution of the routines and the analysis of the collected historical 3D data. The process goal is to reduce the tool routine frequency by establishing and proving tool stability utilizing historical data. The historical data will also give us information in regards to design and tolerance capabilities. Graphical software programs are evolving in a way that enables us to link the different operations and software programs that encompass tool routines. Through the use of software and hardware such as laser tracker, we can achieve automation of tool routines and analysis. Customers in the aerospace, automotive and construction industries are among the beneficiaries in the application of this inspection process.

A new gage block system for measuring fastener gage protrusion has been developed that is precise and cost effective. A chamfered gage bore and shank constraint inserts provide improved wear characteristics and a ten to one reduction in block requirements. Accuracy and repeatability performance makes the system an attractive candidate for Statistical Process Control for the tightest tolerance fasteners. A new “block custom” calibration process assures accuracy and allows wider tolerances on gage block dimensions. Through better control of gage protrusion in fastener manufacturing, airplane manufacturers can expect improvements in fastener installation quality and eventually in customer satisfaction.