Search Results

Advanced modeling and simulation techniques are becoming more important in today's industrial design processes and for aircraft energy systems in specific. They enable early and integrated design as well as validation of finalized system and component designs. This paper describes the main methods and tools that can be applied for different phases of the energy design process. For demonstration, the object-oriented modeling language Modelica was chosen, since it enables convenient modeling of multi-physical systems. Based on this standard, common modeling guidelines, a modeling library template, and common interfaces have been provided. A common modeling infrastructure is proposed with considerations on additional libraries needed for local tasks in the energy design process. The developed methods and tools have been tested by means of some predefined use cases, which are performed in cooperation with diverse aircraft industrial partners.

Drag reduction technologies in aircraft design are the key enabler for reducing emissions and for sustainable growth of commercial aviation. Laminar wing technologies promise a significant benefit by drag reduction and are therefore under investigation in various European projects. However, of the established moveable concepts and high-lift systems, thus far most do not cope with the requirements for natural laminar flow wings. To this aim new leading edge high-lift systems have been the focus of research activities in the last five years. Such leading edge devices investigated in projects include a laminar flow-compatible Kruger flap [1] and the Droop Nose concept [2, 3] and these can be considered as alternatives to the conventional slat. Hybrid laminar flow concepts are also under investigation at several research institutes in Europe [4].

This paper describes a novel Thermal Management Function (TMF) and its design process developed in the framework of the Clean Sky project. This TMF is capable of calculating optimized control signals in real-time for thermal management systems by using model-based system knowledge. This can be either a physical model of the system or a data record generated from this model. The TMF provides control signals to the air and vapor cycle which are possible sources of cooling power, as well as load reduction or shedding signals. To determine an optimal cooling split between air cycle, vapor cycle, and its associated ram air channels, trade factors are being used to make electrical power offtake and ram air usage (i.e. drag) comparable, since both have influence on fuel consumption. An associated development process is being elaborated that enables a fast adaptation of the TMF to new architectures and systems. This will be illustrated by means of a bleedless thermal management architecture.

Aiming at the global energy optimization of aircraft, the More Electric Aircraft (MEA) concept becomes more interesting for the aeronautical industry. The MEA concept is based on utilizing electric power to drive aircraft subsystems that historically have been driven by a combination of hydraulic, electric, pneumatic and mechanical power transfer systems. The development of the future MEA systems is a challenging task: the system integration is becoming a central topic. In all phases of the system development process, the respective subsystems within the MEA will be treated in a highly integrated manner to achieve optimum efficiency and performance at aircraft and systems level. Concerning the electric network in the future MEA, advanced design and analysis methods based on mathematical models are required to face the potential issues accompanying the MEA. For this purpose, the use of advanced modelling and simulation technologies is a key success factor.

The simulation of natural-like snow conditions in a controlled environment such as an Icing Wind Tunnel (IWT) is a key component for safe, efficient and cost-effective design and certification of future aircraft and rotorcraft. Current capabilities do not sufficiently match the properties of natural snow, especially in terms of size and morphology. Within the Horizon 2020 project ICE GENESIS, a new technology has been developed aiming to better recreate natural snowflakes. The focus of the newly developed system was the generation of falling snow in a temperature range of +1°C to -4°C. Ground measurements and flight test campaigns have been performed to better characterize these conditions and provide requirements for wind tunnel facilities. The calibration results of the new snow generation system as well as snow accretion data on a NACA0012 test article with a chord length of 0.377 m are presented.

For thermal cabin control of commercial aircraft, the cabin is usually divided into a small number of temperature zones. Each zone features its own air supply pipe. The necessary installation space for ducting increases significantly with the number of zones. This requires the number of temperature zones to be low. Factors such as seating layout, galley placement and passenger density result in deviations in heat flux throughout the cabin. These deviations cannot be compensated by the control system, if they occur within the same temperature zone. This work presents a novel temperature regulation concept based on local mixing. In this concept, two main ducts span the complete cabin length, and provide moderately warm and cold air. At each temperature zone, cabin supply air is locally mixed using butterfly valves. In this way, the number of temperature zones can be individually scaled up without any additional ducting, only requiring additional valves for each temperature zone.

A new optical array imaging probe, called the 1D2D probe, has been developed by Science Engineering Associates, with features added to improve the real-time and post-analysis measurements of particle spectra, particularly in the Supercooled Large Droplet size range. The probe uses optical fibers and avalanche photodiodes to achieve a very high frequency response, and a Field-Programmable Gate Array that performs real-time particle rejection and processing of accepted particles with negligible inter-particle dead time. The probe records monochromatic two-dimensional images, while also recording the number of individual particle pixels at a second grey scale level. The probe implements flexible features to filter recording of highly out of focus particles to improve the accuracy of particle size determination, or to reject small particles to improve the statistics of measurements of larger particles.