Search Results

In recent years, the More-Electric Aircraft (MEA) concept has undergone significant development and refinement, striving towards the attainment of reductions in noise and CO2 emissions, increased power transmission efficiency and improved reliability under a range of flight scenarios. The More-Electric Engine (MEE) is increasingly being seen as a key complementary system to the MEA. With this concept, conventional engine auxiliary systems (i.e. fuel pumps, oil pumps, actuators) will be replaced by electrically-driven equivalents, providing even greater scope for the combined aircraft and engine electrical power system optimisation and management. This concept, coupled with extraction of electrical power from multiple engine spools also has the potential to deliver significant fuel burn savings. To date, single or dual channel electrical power generation and distribution systems have been used in engines and aircrafts.

The continued electrification of aircraft is required such that ambitious decarbonisation targets can be met. A significant challenge presented with this trend is the increased reliance on electrical systems to perform flight-critical operations in a manner that has not been seen in previous generations of aircraft. The power electronic converter is a key enabling technology in aircraft electrification. Its prevalence is such that the failure rate of flight critical-loads is closely linked with that of the associated power electronic converters. As such, there is a clear need to better understand the impact of improvements in both the reliability and failure estimation of novel power electronic converters at a systems level in future aerospace applications. Accordingly, this paper presents key highlights from literature on power converter research, summarising advances in reliability-enhancing features and more accurate Physics-of-Failure modelling methods.

Contemporary trends are leading towards the electrification of aircraft for urban mobility applications. Accordingly, there is a high demand for advancements in light-weight, high voltage technologies to realize these new aircraft types. Driven by recent developments in the automotive industry, hybrid Pyrofuse protection devices have emerged as one such new candidate technology. Pyrofuses offer rapid clearance of fault currents, reduced cost and weight when compared to conventional mechanical breakers. In addition, Pyrofuses have the ability to tune the time-current curve to fit the application’s fault response characteristics. However, Pyrofuses are non-resettable devices whose exclusive use for electrical protection could present potential operational hazards and certification challenges in aerospace applications. Model-based analysis will be critical in supporting this evaluation.

Turbo-electric distributed propulsion (TeDP) for aircraft allows for the complete redesign of the airframe so that greater overall fuel burn and emissions benefits can be achieved. Whilst conventional electrical power systems may be used for smaller aircraft, large aircraft (~300 pax) are likely to require the use of superconducting electrical power systems to enable the required whole system power density and efficiency levels to be achieved. The TeDP concept requires an effective electrical fault management and protection system. However, the fault response of a superconducting TeDP power system and its components has not been well studied to date, limiting the effective capture of associated protection requirements. For example, with superconducting systems it is possible that a hotspot is formed on one of the components, such as a cable. This can result in one subsection, rather than all, of a cable quenching.

There is a well-recognised need for robust simulation tools to support the design and evaluation of future More-Electric Engine and Aircraft (MEE/MEA) design concepts. Design options for these systems are increasingly complex, and normally include multiple power electronics converter topologies and machine drive units. In order to identify the most promising set of system configurations, a large number of technology variants need to be rapidly evaluated. This paper will describe a method of MEE/MEA system design with the use of a newly developed transient modeling, simulation and testing tool aimed at accelerating the identification process of optimal components, testing novel technologies and finding key solutions at an early development stage. The developed tool is a Matlab/Simulink library consisting of functional sub-system units, which can be rapidly integrated to build complex system architecture models.

Turboelectric Distributed Propulsion (TeDP) is actively being investigated as a means of providing thrust in future generations of aircraft. In response to the lack of published work regarding the system-level fault behaviour of a fully superconducting network, this paper presents key points from a two stage Failure Modes and Effects Analysis (FMEA) of a representative TeDP network. The first stage FMEA examines the qualitative behaviour of various network failure modes and considers the subsequent effects on the operation of the remainder of the network, enabling the identification of key variables influencing the fault response of the network. For the second stage FMEA, the paper focuses on the characterisation of the rate at which electrical faults develop within a TeDP network.

A number of concepts have been proposed to meet future aircraft performance goals. One such concept under consideration is Turboelectric Distributed Propulsion (TeDP) featuring a large number of superconducting motors powered by two superconducting generators placed on each wingtip and connected through a DC distribution network. A key aspect in any design concept is the ability to prove that the system will exhibit a satisfactory reliability for all intended operating conditions. A common tool to support the calculation of failure rates and reliability is Fault Tree Analysis (FTA), and this will be utilized within this paper. The paper undertakes an architectural level FTA on a NASA proposed TeDP architecture to identify any significant factors contributing to the failure rate of key functionalities within the network.

The aviation industry has witnessed a technological shift towards the More Electric Aircraft (MEA) concept. This shift has been driven by a number of perceived benefits including performance optimization and reduced life-cycle costs. Increased electrification within MEA has made aircraft electrical networks larger and more complex and this necessitates an increased electrical power offtake from the engine. The paralleling of multiple generation sources across the aircraft is one potential design approach which could help improve engine operability and fuel efficiency within more-electric aircraft platforms. Accordingly, this paper will investigate options for the realization of paralleled generation systems within the context of current design and certification rules. The paper first illustrates, through simulation, that MIL-STD-704F voltage envelopes may be breached for some interconnected electrical architectures under fault conditions.

This paper analyses the behaviour of a highly-capacitive DC UAV network under fault conditions. Through simulation, the nature of overvoltage transients caused by the redistribution of stored energy following the clearance of a fault is illustrated. It is found that clearance of fault currents at or around their peak magnitude can result in substantial quantities of inductive energy being redirected into the smaller load capacitors, causing severe overvoltages across these loads. Recommendations for a protection strategy are given on the basis of the results presented, with consideration given to the use of surge arrestors to provide additional overvoltage protection to sensitive loads.

Mass and efficiency are key performance indicators for the development and design of future electric power systems (EPS) for more-electric aircraft (MEA). However, to enable consideration of high-level EPS architecture design trades, there is a requirement for modelling and simulation based analysis to support this activity. The predominant focus to date has been towards the more detailed aspects of analysis, however there is also a significant requirement to be able to perform rapid high-level trades of candidate architectures and technologies. Such a capability facilitates a better appreciation of the conflicting desires to maximize availability and efficiency in candidate MEA architectures, whilst minimizing the overall system mass. It also provides a highly valuable and quantitative assessment of the systemic impact of new enabling technologies being considered for MEA applications.

The increasing electrical demand in commercial and military aircraft justifies a growing need for higher voltage DC primary distribution systems. A DC system offers reduced power losses and space savings, which is of major importance for aircraft manufacturers. At present, challenges associated with DC systems include reliable fast acting short circuit protection. Solid State Contactors (SSC) have gained wide acceptance in traditional 28 VDC secondary systems for DC fault interruption. However, the reliable operation at higher operating voltages and currents requires further technology maturation. This paper examines a supporting method to SSC for more reliable fault mitigation by investigating bidirectional AC/DC converter topology with DC fault current blocking capability. Replacement of semiconductor switches with full bridge cells allows instant reversal of voltage polarities to limit rapid capacitor discharge and machine inductive currents.

Within aircraft electrical network designs, energy storage systems (ESS) provide a means of decoupling the electrical-mechanical interactions between the aircraft electrical power system and the aircraft engine, meeting peak load demand and maintaining power quality during network disturbances and variable load conditions. Within the literature to date, control and management strategies of ESSs for such applications has primarily focused on normal network operation with only limited coverage on the behavior of such technologies under abnormal conditions and the subsequent impact on the operation of the wider power system. Through modeling and simulation of a generic aircraft electrical system, this paper will highlight the potential risks of the inherent, sub-optimal operation of certain existing control strategies during fault conditions.