Search Results

This standard covers three basic types of total-temperature-measuring instruments used as a means of determining the total temperature developed by adiabatic heating of the air due to motion of the aircraft through the air. Type I - Flush-type total-temperature sensor Type II - Probe-type total-temperature sensor (electrically heated) Type III - probe-type total-temperature sensor (unheated)

This standard covers three basic types of total-temperature-measuring instruments used as a means of determining the total temperature developed by adiabatic heating of the air due to motion of the aircraft through the air.

This standard covers stall warning instruments to provide positive warning to the pilot of an impending stall. Stall, as defined for the purpose of this standard, is the minimum steady flight speed at which the airplane is controllable.

This standard covers stall warning instruments to provide positive warning to the pilot of an impending stall. Stall, as defined for the purpose of this standard, is the minimum steady flight speed at which the airplane is controllable.

This aerospace standard covers the following basic instrument types:

In efforts to increase the accuracy and reliability of altimetry, speed measurement and other aspects of air data, a great deal of attention and money have been expended on new and refined pressure transducing and computing systems and on the standards by which they are calibrated. So much progress has been made in this that the limiting factor is, or may soon be, the sensing and transmitting in the aircraft of the pressures to be transduced. Until the appearance of References 1-13 and 18 there was little guidance available on the maintenance of pitot and static systems. This report presents what information is available, suggests limits, and lists the principal original papers on the subject.

In efforts to increase the accuracy and reliability of altimetry, speed measurement and other aspects of air data, a great deal of attention and money have been expended on new and refined pressure transducing and computing systems and on the standards by which they are calibrated. So much progress has been made in this that the limiting factor is, or may soon be, the sensing and transmitting in the aircraft of the pressures to be transduced. Until the appearance of References 1-13 and 18 there was little guidance available on the maintenance of pitot and static systems. This report presents what information is available, suggests limits, and lists the principal original papers on the subject.

In efforts to increase the accuracy and reliability of altimetry, speed measurement and other aspects of air data, a great deal of attention and money have been expended on new and refined pressure transducing and computing systems and on the standards by which they are calibrated. So much progress has been made in this that the limiting factor is, or may soon be, the sensing and transmitting in the aircraft of the pressures to be transduced. Until the appearance of References 1-13 and 18 there was little guidance available on the maintenance of pitot and static systems. This report presents what information is available, suggests limits, and lists the principal original papers on the subject.

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

This aeronautical standard covers two basic types of instruments as follows: Type I - Pitot Pressure, straight and L-shaped, 12 and 14 volt nominal, 2 wire circuit. Type II - Pitot and Static Pressured, straight and L-shaped, 12 and 24 volt nominal, 2 wire circuit.

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

This aeronautical standard covers two basic types of instruments as follows: Type I - Pitot Pressure, straight and L-shaped, 12 and 14 volt nominal, 2 wire circuit. Type II - Pitot and Static Pressured, straight and L-shaped, 12 and 24 volt nominal, 2 wire circuit.