Search Results

Abstract TOC

Abstract Fiber-reinforced composites are widely used in injection molding processes because of their high strength and high elastic modulus. However, the addition of reinforcing agents such as glass fibers has a significant impact on their injection molding quality. The difference in shrinkage and hardness between the plastic and the reinforcement will bring about warpage and deformation in the injection molding of the product. At the same time, the glass fibers will be oriented in the flow direction during the injection molding process. This will enhance the mechanical properties in the flow direction and increase the shrinkage in the vertical direction, reducing the molding quality of the product. In this study, a test program was developed based on the Box-Behnken test design in the Design-Expert software, using a plastic part as an example.

Abstract During aircraft wing assembly, machined fiberglass shims are often used between mating parts to compensate for inherent geometric variability due to manufacturing. At present, fiberglass shims for large aerospace structures, such as shims attached to wing ribs, are manufactured either manually or by precision machining, both of which pose a challenge due to tight tolerance requirements and wide geometric variations in the aircraft structures. Relative to articulated arm industrial robots, gantry-style computer numerical control (CNC) machines are costly, consume large footprints, and are inflexible in the application. Therefore, industrial robots are viewed as potential candidates to replace these gantry systems to facilitate metrology, shim machining, and permanent joining of aircraft structure, with all these processes taking place in the assembly process step.

Abstract Aircraft subsystem development involves various combinations of testing and qualification activities to realize a flight-worthy system. The subsystem needs to be verified for a massive number of customer requirements. Power quality (PQ) testing is also an important testing activity carried out as part of the environmental qualification test. It is intended to verify the functionality of subsystems with various kinds of power disturbances and to determine the ability of a subsystem to withstand PQ disturbances. The subsystem being designed should be reliable enough to handle PQ anomalies. A PQ test results in an enormous amount of data for analysis with millions of data samples depending on the test and can be identified as big data. The engineer needs to analyze each set of test data as part of post-processing to ensure the power disturbances during testing are as per the standard requirements and that the functional performance of the subsystem is met.

Abstract Sealed electronic components are the basic components of aerospace equipment, but the issue of internal loose particles greatly increases the risk of aerospace equipment. Traditional material recognition technology has a low recognition rate and is difficult to be applied in practice. To address this issue, this article proposes transforming the problem of acquiring material information into the multi-category recognition problem. First, constructing an experimental platform for material recognition. Features for material identification are selected and extracted from the signals, forming a feature vector, and ultimately establishing material datasets. Then, the problem of material data imbalance is addressed through a newly designed direct artificial sample generation method. Finally, various identification algorithms are compared, and the optimal material identification model is integrated into the system for practical testing.

Abstract A key problem of the construction of fully electric aircraft is the limited energy density of battery packs. It is generally accepted that this can only be overcome via new, denser battery chemistry together with a further increase in the efficiency of power utilization. One appealing approach for achieving the latter is using laser-assisted filler-based joining technologies, which offers unprecedented flexibility for achieving battery cell connections with the least possible electrical loss. This contribution presents our results on the effect of various experimental and process parameters on the electrical and mechanical properties of the laser-formed bond.

Abstract In the aeronautical field, aircraft reliability is strictly dependent on propulsion systems. Indeed, a reliable propulsion system ensures the safety of pilots and passengers and the possibility of making comfortable flights. Typically, on aircraft equipped with spark ignition (SI) engines, one of the principal requirements to make them reliable is the correct balancing between the intake air mass and fuel flows. Advances in the implementation of sophisticated control and estimation strategies on SI engines allow realizing engines with improved features in terms of performance, reducing pollution emissions, and fuel consumption. Approaches based on sensor redundancy are applied to improve the reliability in measurements of the manifold air pressure (MAP) and flow (MAF) to avoid issues related to possible faults of sensors vital for the correct functioning of SI engines.

Abstract Inspection of Composite panels is vital to the assessment of their ability to be fit for purpose. Conventional methods such as X-ray CT and Ultrasonic scanning can be used, however, these are often expensive and time consuming processes. In this paper we investigate the use of off-the-shelf Non-Destructive Test, NDT, equipment utilizing Fringe projection hardware and open source software to rapidly evaluate a series of composite panels. These results are then verified using destructive analysis of the panels to prove the reliability of the rapid NDT methods for use with carbon composite panels. This process allows us to quickly identify regions of geometric intolerance or formed defects without the use of expensive sub-surface scanning systems, enabling a fast and cost effective initial part evaluation system. The focus of this testing series is on 6mm thick pre-preg carbon-epoxy composite laminates that have been laid up using AFP and formed using TRF.

Abstract Geometric variation stemming from manufacturing can be a limiting factor for the quality and reliability of products. Therefore, manufacturing assessments are increasingly being performed during the early stages of product development. In the aerospace industry, products are complex engineering systems, the development of which require multidisciplinary expertise. In such contexts, there are significant barriers against assessing the effects of geometric variation on the functionality of products. To overcome these barriers, this article introduces a new methodology consisting of a modelling approach linked to a multidisciplinary simulation environment. The modelling approach is based on the parametric point method, which allows point-scanned data to be transferred to parameterised CAD models. In a case study, the methodology is implemented in an industrial setting.

Abstract Additive manufacturing (AM) technologies can produce lighter parts; reduce manual assembly processes; reduce the number of production steps; shorten the production cycle; significantly reduce material consumption; enable the production of prostheses, implants, and artificial organs; and produce end-user products since it is used in many sectors for many reasons; it has also started to be used widely, especially in the field of aerospace. In this study, polylactic acid (PLA) was preferred for the antenna substrate because it is environmentally friendly, easy to recycle, provides convenience in production design with a three-dimensional (3D) printer, and is less expensive compared to other available materials. Copper (Cu) tape and graphene filament were employed for the antenna patch component due to their benefits.