Search Results

Standard

Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments

2005-10-03

HISTORICAL

ARP924A

This SAE Aerospace Recommended Practice (ARP) covers the requirements for the types of glass to be utilized in the fabrication of cover glasses and lighting wedges used in aerospace instruments. It defines the maximum extent of physical defects and recommends standard methods of inspection and evaluation. Definitions of terminology used in this document are covered in 2.2.

Standard

Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays

2012-09-12

CURRENT

ARP1782B

This ARP describes methods for measuring the visual performance of direct view cathode ray tube displays used in aircraft flight decks and cockpits. Procedures may vary depending upon the type of display (for example, monochrome, color shadowmask, beam index, etc.), but all types are considered.

Standard

Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays

2008-05-01

HISTORICAL

ARP1782A

This ARP describes methods for measuring the visual performance of direct view cathode ray tube displays used in aircraft flight decks and cockpits. Procedures may vary depending upon the type of display (for example, monochrome, color shadowmask, beam index, etc.), but all types are considered.

Standard

Panels, Information, Integrally Illuminated

2011-04-01

CURRENT

AS7788A

This specification covers the general requirements for integrally illuminated information panels.

Standard

Lamps for Aircraft Lighting

2013-10-08

CURRENT

ARP881F

This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.

Standard

Lamps for Aircraft Lighting

2007-07-09

HISTORICAL

ARP881E

This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.

Standard

LIGHT ASSEMBLY, COCKPIT, FIXED

2006-02-02

HISTORICAL

AS25027

Standard

LIGHT ASSEMBLY, COCKPIT, FIXED

2018-06-29

CURRENT

AS25027B

Standard

LIGHT ASSEMBLY, COCKPIT, FIXED

2013-03-05

HISTORICAL

AS25027A

Standard

Design Criteria for White Incandescent Lighted Aerospace Instruments

2012-06-29

HISTORICAL

ARP798A

This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures recommended for use with white incandescent integrally lighted instruments. Its use should provide uniformity of illumination from instrument to instrument and legibility under daylight operation. An appendix is provided to familiarize the designer with some of the techniques used to obtain uniformity of color and illumination in various types of instruments.

Standard

Design Criteria for White Incandescent Lighted Aerospace Instruments

2017-07-19

CURRENT

ARP798B

This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures recommended for use with white incandescent integrally lighted instruments. Its use should provide uniformity of illumination from instrument to instrument and legibility under daylight operation. An appendix is provided to familiarize the designer with some of the techniques used to obtain uniformity of color and illumination in various types of instruments.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

1998-07-01

HISTORICAL

AS4156A

This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamp. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2020-03-12

CURRENT

AS4156C

This document specifies that black is the only color that can be used for the insulator at the bottom of the base of T-1 and T-1 ¾ Flanged Base lamps.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2012-12-06

HISTORICAL

AS4156B

This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamp. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2006-11-07

HISTORICAL

ARP4156B

This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamps. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only, as an option. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.

Standard

Aircraft Indicating Systems Optical Performance

2021-06-01

CURRENT

ARP1088C

This ARP is intended to cover the warning, caution, and advisory indicating system required for commercial and military aerospace vehicles.

Standard

Aircraft Indicating Systems

2015-08-14

HISTORICAL

ARP1088B

This ARP is intended to cover the warning, caution and advisory indicating system required for commercial and military aerospace vehicles.