Search Results

This paper describes a study on electrical power management for the More Electric Aircraft (or MEA) and the More Electric Engine (or MEE). This study explored power management solutions based on an integrated engine/power control system and a permanent magnet motor. In recent years, electrical power management has emerged as a key aspect of aircraft system design. In cases in which the Electromechanical Actuator (or EMA) systems are used for flight control, the power bus systems must also be designed to dissipate the power regenerated from flight control systems. In their study, the authors focused on achieving an optimal balance between aircraft power management and operational requirements of the aero-engines. The study results suggest an effective and novel power control concept based on integrated engine control technologies that ensure stable power systems.

To improve an energy optimization issue of ECS for MEA, we propose our concept in which ACS is replaced with VCS. A VCS is generally evaluated as auxiliary or limited cooling system of an aircraft. Cooling demand of commercial aircraft usually becomes large due to ventilation air at hot day conditions. In case of using conventional VCS for whole cooling demand, the ECS becomes too heavy as aircraft equipment. Though ACS's light weight is advantageous, the issue that VCS will be available for aircraft ECS is important for saving energy. ECS of commercial aircraft should work for three basic functions, i.e. pressurization, ventilation, and temperature control. The three functions of the ECS for bleed-less type of MEA can be distributed among equipment of the ECS. MDFAC works for pressurization and ventilation. Therefore, we should select appropriate system for only temperature control.

With airlines increasingly directing their attention to operating costs and environmental initiatives, the More Electric Architecture for Aircraft and Propulsion (MEAAP) is emerging as a viable solution for improved performance and eco-friendly aircraft operations. This paper focuses on electric taxiing that does not require the use of jet engines or the auxiliary power unit (APU) during taxiing, either from the departure gate to take-off or from landing to the arrival gate. Many researchers and engineers are considering introducing electric taxiing systems as part of efforts to improve airport conditions. To help cut aircraft emissions at airports, MEAAP seeks to introduce an electric taxiing system that would reduce the duration for which engines and APUs operate while on the ground. Given this goal, the aircraft electrical system deployed for use at airports must rely on a power source other than the jet engines or APU.

The more electric aircraft (MEA) concept has been attracting attention over recent decades to reduce emissions and fuel consumption. In MEAs, many subsystems that previously used hydraulic or pneumatic power have been replaced by electrical systems, and hence the weight of inverters has significant importance. The weight of inverters is largely attributed to passive filters that reduce the derivative of output voltages dv/dt and electromagnetic interference noises caused by common-mode voltages. To reduce the size of passive filters, multilevel inverters with 5 or more voltage steps are preferred. However, classic multilevel inverters have some challenges to achieve these step numbers without using plural dc power supplies that require massive transformers. In this work, a gradationally controlled voltage (GCV) inverter is proposed for MEAs.

This paper describes study for fuel pump system configuration which is suitable for the MEE (More Electric Engine) system. The MEE is a new engine system concept which intends engine efficiency improvement, which results in a reduction of engine fuel burn and CO₂ emissions from aircraft. Final configuration of the MEE will contain various engine systems, such as fuel system, oil system and electric generating system, but we focus on high efficiency fuel systems as a first step of the MEE development. The MEE is an advanced engine control technology utilizing recent innovations in electric motors and power electronics and replacing conventional engine accessories, such as AGB-driven pumps and hydraulic actuators with electric motor-driven pumps and EMAs (Electro-Mechanical Actuators), which are powered by generators. Because fuel pump system configuration is a key for the MEE fuel system, we conducted comparison of several pump systems and adopted a fixed displacement gear pump system.

In development of more electric aircraft applications, it is important to discuss aircraft energy management on various level of aircraft operation. This paper presents a computationally efficient optimization model for evaluating flight efficiency on global and interval flight ranges. The model is described as an optimal control problem with an objective functional subjected to state condition and control input constraints along a flight path range. A flight model consists of aircraft point-mass equations of motion including engine and aerodynamic models. The engine model generates the engine thrust and fuel consumption rate for operation condition and the aerodynamic model generates the drag force and lift force of an aircraft for flight conditions. These models is identified by data taken from a published literature as an example. First, approximate optimization process is performed for climb, cruise, decent and approach as each interval range path.

This paper describes the comparison of electromagnetic characteristics of two different superconducting-motor structures for electrified aircraft propulsion systems. Future electrified aircraft demand higher output (over 16 kW/kg) and higher efficiency (> 98%) for their motors in comparison with current ones. To satisfy the demands, two kinds of superconducting motors are dealt in this study: one is partially superconducting motors (PSCMs), made of superconducting field coils and copper armature windings; the other is the fully superconducting motors (FSCMs) made of superconducting field/armature windings. They are cooled at 20 K with liquid hydrogen. We designed these two motors with finite element method to obtain the output density of 16-20 kW/kg for future electrified propulsion systems. We selected 3.0- and 5.0 MW superconducting motors, considering the application to aircraft for almost 180 passengers and 44 MW rated power for take-off.

This paper describes the concept of an air/fuel integrated thermal management system, which employs the VCS (Vapor Cycle System) for the refrigeration unit of the ECS (Environment Control System), while exchanging the heat between the VCS refrigerant and the fuel into the engine, and presents a feasibility study to apply the concept to the future all electric aircraft systems. The heat generated in an aircraft is transferred to the ECS heat exchanger by the recirculation of air and exhausted into the ram air. While some aircraft employ the fluid heat transfer loop, the transferred heat is exhausted into the ram air. The usage of ram air for the cooling will increase the ram drag and the fuel consumption, thus, less usage of ram air is preferable. Another source for heat rejection is the fuel. The heat exchange with the fuel does not worsen the fuel consumption, thus, the fuel is a preferable source.