This document comprises the technical terms and nomenclature together with their definitions and abbreviations used in the field of aerospace fluid power, actuation, and control technologies. The terms listed herein, both general and specific, are believed to be most useful as a reference in the design of future aerospace vehicle fluid power, actuation, and control systems.
This SAE Aerospace Recommended Practice (ARP) establishes the minimum requirements and procedures for impulse testing of aerospace hydraulic actuators, valves, pressure containers, and similar fluid system components, for use in aerospace hydraulic systems; for exceptions, see paragraph 9.1. This ARP also refers to standard impulse test equipment, which may be used in conducting these impulse tests.
This SAE Aerospace Standard (AS) provides a system of graphic symbols and line codings that are intended primarily for usage in hydraulic and pneumatic system schematic diagrams for all types of aircraft.
This Aerospace Standard (AS) presents a system of graphic symbols intended primarily for usage in hydraulic and pneumatic system schematic diagrams for all types of aircraft. It is also considered suitable for marine vehicles and other applications and for ancillary documents where schematics are required. Individual graphic symbols shown herein are also considered suitable for use in conjunction with other types of symbols. This AS is intended to promote industry-wide acceptance and understanding of uniform standards and employs, where possible, symbols which are internationally recognized.
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented to the A-6 during meetings held from 1989 through 1999. The document is organized into five sections covering systems, actuation, hydromechanical components, electrical components and miscellaneous, each further divided into subsections. The lessons are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
This SAE Aerospace Information Report (AIR) contains technical information on aerospace hydraulic, actuation and support equipment technologies lessons learned. The lessons learned were prepared by system designers and hydraulic engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented at eight Lessons Learned Symposia from 1989 through 1999 held during A-6 Committee meetings. The technical topics represent many years of design experience in hydraulics and actuation, which it is felt is a resource for learning that should be documented and made available to current and future aerospace hydraulic engineers and designers. The document is organized into two sections: systems and components with further categories within the components section.
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented to the A-6 during meetings held from 1989 through 1999. The document is organized into five sections covering systems, actuation, hydromechanical components, electrical components and miscellaneous, each further divided into subsections. The lessons are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
This SAE Aerospace Information Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, AS5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document.
This Aerospace Information Report (AIR) contains technical information on aerospace hydraulic and actuation technologies lessons learned. The lessons learned were prepared by system designers and hydraulic engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented at three Lessons Learned Symposia in 1989 and 1990 held during A-6 Committee meetings. The technical topics represent many years of design experience in hydraulics and actuation, which it is felt is a resource for learning that should be documented and made available to current and future aerospace hydraulic engineers and designers. The document is organized into two sections; systems and components, with further categories within the components section.
This SAE Aerospace Information Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, MIL-H-5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document.
This report lists military and industry specifications and standards which are used in Aero/Space Hydraulic and Pneumatic Systems. It is intended as a supplement to Specifications MIL-H-5440 and MIL-P-5518. Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed.
This report lists military and industry specifications and standards which are used in aerospace hydraulic and pheumatic systems. It is intended as a supplement to specifications MIL-H-5440 and MIL-P-5518. Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed.
This report lists military and industry specifications and standards which are used in Aero/Space Hydraulic and Pneumatic Systems. It is intended as a supplement to Specifications MIL-H-5440 and MIL-P-5518. Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed.
This report lists military and industry specifications and standards which are used in aerospace hydraulic and pneumatic systems. It is intended as a supplement to specifications MIL-H-5440 and MIL-P-5518. Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed. Order of procedure for the selection of specifications and standards is covered by MIL-STD-143.
This report lists military and industry specifications and standards which are used in aerospace hydraulic and pneumatic systems. It is intended as a supplement to specifications MIL-H-5440 and MIL-P-5518. Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed. Order of procedure for the selection of specifications and standards is covered by MIL-STD-970.