Search Results

The paper presents the results of ground and flight (on OSS Mir) tests of an updated purification assembly of the WRS-C system outfitted with a filter-reactor. The tests have proved that the filter-reactor oxidizes effectively basic organic contaminants in humidity condensate including ethyleneglycol to ones that easily undergo sorption, enables the operation of the recovery system in the event of an off-design increase in organic contaminants in condensate and significantly improves the lifetime of the purification assembly. The data obtained confirm a wise selection of the purification assembly hardware for the system for water recovery from humidity condensate WRS-CM for the ISS service module.

This paper deals with water reclamation from humidity condensate and urine schematics and processes realized on orbital space stations Salut and Mir. The results of research in updated processes and schematics for condensate separation, purification and distillation with heat energy recovery are described. It is shown that the processes and hardware make possible to reduce energy demand and the weight of the water recovery systems under operation on space stations.

The paper deals with possible performance enhancement of the system for water reclamation from urine based on a principle of atmospheric distillation. It is shown by way of example using the system operating on Mir that the introduction of heat energy recuperation, an increase in heat-and-mass transfer efficiency on evaporation and the optimization of the air flowrate in the distillation cycle allow a rise in the capacity of the distillation assembly and a reduction in specific energy. The system outfitted with a rotary evaporator/separator and a thermoelectric heat pump is reviewed. The design and experimental data verify the feasibility and benefits of the system updating.

A concept of LSS building for planetary stations is suggested on the basis of experience in the development, research and testing of physical/chemical regenerative LSS for long-duration ground-based bio-technical complexes of habitat support and for orbiting space stations. A gradual transition from integrated physical/chemical regenerative LSS to hybrid integrated physical/chemical and bio-technical LSS and finally to integrated bio-technical regenerative LSS, is suggested. It is shown that at all phases of integrated LSS development, the systems based on physical/chemical processes will be critical for correlating the interfaces between the biological components that process the products obtained in the bio-components, and enabling the vitality of integrated LSS under emergency situations. The interface of integrated LSS with base power supply system is outlined.

The paper systematizes typical hydrodynamic and heat-and-mass transfer chemical engineering processes realized in water recovery systems. The impact of micro-gravity on the processes is analyzed and general principles of the process organization in gas/liquid fluids are described. As examples, some typical separation processes in a coccurred flow channel with liquid suction through a porous wall, liquid evaporation into a vapour/gas fluid and vapour condensation from the vapour/gas mixture are considered for water recovery systems. A versatile approach based on an extended analogy between friction, heat transfer and mass transfer and on limited relative laws of a boundary layer at the permeable surface is suggested for an analysis and calculation of the friction resistance of a two-phase flow, heat transfer and mass transfer on evaporation and condensation. Recommendations for an analysis of the influence of free convection are made.

The paper analyzes and summarizes experience in developing and flight operation of the system for potable water recovery from humidity condensate. The system schematic and its hardware are reviewed. The system performance data on Salut and Mir space stations are presented. Succession to the development of a similar system for the International Space Station (ISS) service module is shown.

This paper describes the results of research and tests of different patterns of distillation processes for water reclamation from urine accomplished by NIICHIMMASH in cooperation with other companies. Several typical patterns of evaporation to air flow from water-retentive porous bodies, from the surface confined by capillary/porous membranes and from free liquid surface in rotary units under atmospheric and reduced pressure are analyzed. Relevant condensation processes are reviewed. Performance data for distillation unit of SS MIR system for water reclamation from urine are outlined. The paper highlights the prospects of distillation hardware development.

The paper deals with description and results of long-term operation of separation and heat-and-mass transfer hardware incorporated in Mir's water recovery systems. Static separators outfitted with hydrophilic capillary/ porous elements, a rotary separator, a through-flow condenser/static separator combination, a membrane evaporator as well as separation and distillation schematics are reviewed. Operational and life performance data are discussed and recommendations for hardware use on ISS are made.

Humidity condensate collected and processed in-flight is an important component of a space station drinking water supply. Water recovery systems in general are designed to handle finite concentrations of specific chemical components. Previous analyses of condensate derived from spacecraft and ground sources showed considerable variation in composition. Consequently, an investigation was conducted to collect condensate on the Shuttle while the vehicle was docked to Mir, and return the condensate to Earth for testing. This scenario emulates an early ISS configuration during a Shuttle docking, because the atmospheres intermix during docking and the condensate composition should reflect that. During the STS-89 and STS-91 flights, a total volume of 50 liters of condensate was collected and returned. Inorganic and organic chemical analyses were performed on aliquots of the fluid.

Development of closed life support systems for water recovery, oxygen generation and food processing is achievable in the future. However, currently the possibility of partial reproduction of food components from metabolic products and biocomplex waste should be taken into account when advanced life support system development is under consideration. Studies on carbohydrate synthesis from products of life are of particular interest because carbohydrates hold the first place in terms of mass in the food. The paper discusses possible ways of carbohydrate synthesis by physical/chemical means. Separate stages of a carbohydrate synthesis process are considered.

The paper deals with some aspects and results of research in major processes and hardware of a system for hygiene waste water recovery and its architecture concepts. A principal system schematic and its functions on Mir space station are presented. It is shown that physico-chemical means ensure cost-effective recovery with minimum energy demand and resupply which is particulary important for long-duration space missions.

A concept of developing a regenerative water management system (RWMS) for first lunar base missions is reviewed. The principal feature of the concept proposed is the maximum possible unification of RWMS for long-duration orbiting station and a lunar base with due regard to possible modification of the hardware for lunar gravity conditions. The paper is based on the expertise in research, development, testing and flight operation of RWMS in Russia. An upgraded RWMS of the International Space Station may be used for first lunar missions.