This SAE Recommended Practice includes wheel mounting elements subject to standardization in a series of industrial and agricultural disc wheels. The disc may be reversible or nonreversible and concave or convex. (See Figure 1 and Table 1.)
This SAE Standard establishes the procedures for the application of Tonne Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis.
This SAE Standard establishes the procedures for the application of Tonne Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis.
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
This SAE Standard establishes the procedures for the application of Ton Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and contains machines referenced in SAE J1116.
This SAE Standard establishes the procedures for the application of Ton Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and contains machines referenced in SAE J1116.
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
This recommended practice covers commonly used off-road tire sizes in tire type categories of E, G, and L in diagonal (bias) ply and radial ply constructions.
This SAE information report covers the basic guidelines concerning off-road tire conditions that warrant replacement, removal, or repair. This material can assist the tire user in establishing specific written procedures for each job site.
This SAE information report covers the basic guidelines concerning off-road tire conditions that warrant replacement, removal, or repair. This material can assist the tire user in establishing specific written procedures for each job site.
This SAE Standard provides general guidelines for the proper selection and application of off-road tires and rims; as defined in SAE J751 APR86; and applied to earthmoving machines described in SAE J1116 JUN86 and J1057 JUN81.
This recommended practice applies to the selection of tires and rims for load carrying ability as related to size, inflation pressure, and speed. Included are off-road tires of categories E, L, G, C, and LS, only, together with rims commonly used to mount them (Ref. J751d). Consideration of tire characteristics such as flotation, cut and bruise resistance, ride quality, wear, and tractive ability are not covered herein.
This recommended practice applies to the selection of tires and rims for load carrying ability as related to size, inflation pressure, and speed for machines in SAE J1116 Category 1, Construction. Included are off-road tires of categories E, L, G, and C only, together with rims commonly used to mount them (Ref. J751 APR80). Consideration of tire characteristics such as flotation, cut and bruise resistance, ride quality, wear, and tractive ability are not covered herein.