Search Results

This book examines the development of the engine from a historical perspective. Originally published in Japanese, The Romance of Engines' English translation offers readers insight into lessons learned throughout the engine's history. This book belongs on the bookshelves of all engine designers, engine enthusiasts, and automotive historians. Topics covered include: Newcomen's Steam Engine The Watt Steam Engine Internal Combustion Engine Nicolaus August Otto and His Engine Sadi Carnot and the Adiabatic Engine Radial Engines; Piston and Cylinder Problems Engine Life Problem of Cooling Engine Compartments Knocking; Energy Conservation Bugatti; Volkswagon Rolls Royce Packard Daimler-Benz DB601 Engine and more!

The reduction of CO2 emissions is one of the most important challenges for the automotive industry to contribute to address global warming. Reducing friction of internal combustion engines (ICEs) is one effective countermeasure to realize this objective. The improvement of engine oil can contribute to reduce fuel consumption by reducing friction between engine parts. Electrification of ICE powertrains increases the overall efficiency of powertrains and reduces the average engine oil temperature during vehicle operation, due to intermittent engine operation. An effective way of reducing engine friction is to lower the viscosity of the engine oil in the low to medium temperature range. This can be accomplished while maintaining viscosity at high temperatures by reducing the base oil viscosity and increasing the viscosity modifier (VM) content to raise the viscosity index (so-called “flat viscosity” concept).

The purpose of this study is to find the suitable working conditions of a Pressure Wave Supercharger (PWS) that is coupled to a gasoline engine experimentally. The working condition is validated by stationary measurements on an engine dynamometer. To achieve an easier system structure, it was examined to use the engine output for driving of PWS. As a result, it was confirmed that the engine coupled with PWS could be driven by making the ratio of the PWS rotor speed and the engine speed constant.

In order to clarify the diesel fuel spray characteristics inside the cylinder, we developed two novel techniques, which are preparation of same level of temperature and pressure ambient as inside cylinder and quantitative measurement of vapor concentration. The first one utilizes combustion-type constant-volume chamber (inner volume 110cc), which allows 5 MPa and 873K by igniting the pre-mixture (n-pentane and air) with two spark plugs. In the second technique, TMPD vapor concentration is measured by using Laser Induced Exciplex Fluorescence method (LIEF). The concentration is compensated by investigation of the influence of ambient pressure (from 3 to 5 MPa) and temperature (from 550 to 900 K) on TMPD fluorescence intensity. By using two techniques, we investigated the influence of nozzle hole diameter, injection pressure and ambient condition on spray characteristics.

In the past two decades, internal combustion engines have been required to improve their thermal efficiency in order to limit hazardous gas emissions. For further improvement of the thermal efficiency, it is required to predict the mass of intake air into cylinders in order to control the auto-ignition timing for CI engines. For an accurate prediction of intake air mass, it is necessary to model the heat transfer phenomena at the intake manifold. From this intention, an empirical equation was developed based on Colburn equation. Two new arguments were presented in the derived formula. The first argument was the addition of Graetz number, where it characterized the entrance region thermal boundary layer development and its effect on the heat transfer inside the intake manifold. As the second argument, Strouhal number was included in order to represent intake valve effect on heat transfer.

An empirical equation was developed for modeling the heat transfer phenomena taking place in an intake manifold which included the backflow gas effect. In literature, heat transfer phenomenon at intake system is modeled based on steady flow assumptions by Colburn analogy. Previously, authors developed an equation with the introduction of Graetz and Strouhal numbers, using a port model experimental setup. In this study, to further improve the empirical equation, real engine experiments were conducted where pressure ratio between the intake manifold and engine cylinder were added along with Reynolds number to characterize the backflow gas effect on intake air temperature. Compared to the experimental data, maximum and average errors of intake air temperature estimated from the new empirical equation were found to be 2.9% and 0.9%, respectively.

This research focuses on the improvement of torque at the middle engine speed of a motorcycle engine with resonance supercharging. The resonance supercharging intake system is realized with a simple modification to the intake collector geometry. A one-dimensional computational model is employed to simulate the pressure wave propagation and to optimize the configuration of it. The experiments confirmed the increase in the engine torque for the entire operation range and the maximum gain of 33% was achieved at 8500rpm. The resonance effect is further investigated through three-dimensional simulation, in which the intake airflow rate, static pressure distribution are analyzed.

Measuring precise cylinder pressure traces of internal combustion engines is an important factor for estimating their performances. It is known that the actual pressure readings measured with piezoelectric pressure transducers nave various forms of error. This paper is devoted to a study of compensation methods for reducing the errors caused by time constant values and thermal shock. Numerical analysis were carried out for the both errors to derive the equations of error compensation using the actual pressure data. The results indicate that the errors are corrected quite well with the obtained equations.

For further development of the thermal efficiency of SI engines, the robust control of the air-fuel ratio (A/F) fluctuation is one of the most important technologies, because the A/F is maintained at the theoretical constant value, which causes the increase of the catalytic conversion efficiency and the reduction of pollutant emission. We developed the robust controller of the A/F, which is the method to change the fuel injection rate by using the feed-forward (FF) controller considering the heat transfer at the intake system. The FF controller was verified under transient driving conditions for a single cylinder, and the A/F fluctuations were reduced at approximately 84%.

This investigation was concerned with the rate of heat transfer from the working gases to the combustion chamber walls of the internal combustion engines. The numerical formula for estimating the heat transfer to the combustion chamber wall was derived from the theoretical analysis and the experiment, which were used the constant volume combustion chamber and the actual gasoline engine. As a result, mean heat transfer in the internal combustion engine becomes possible to estimate with measuring the cylinder pressure. In addition, the derived numerical formula forms with quite simple variables. Therefore it is very useful for engine design.

Attribute to high heat transfer rate and less complexity, the Helical coil sub-cooled condenser (HCSCC) can provide the most innovative and unique application for the air conditioning system. In the case of automobiles, reduction in air-conditioning load may diminish the vehicular emission, and power consumption as the air-conditioning load is the most power-consuming components after the engine load. Moreover, to solve the problem, we focus on the helical type heat exchanger. It may play a vital role in reducing the weight and increase the performance of the small engine because of the compact structure and lighter weight. The compressor unit is the most vital component of the refrigeration cycle, but the condenser unit is also one of the most critical devices, and the author tried to reduce the power consumption by enhancing the performance of the condenser.

In motorcycle market, there is demand for technology that makes it possible to drive fast safely. One such technology has already been commercialized; control that prevents front lift while enabling maximum acceleration performance. We have developed a more accurate version of this control. In order to maximize acceleration performance, it is necessary to keep front lift angle as close to zero as possible. Reducing output driving force helps to keep the front lift angle low, but if output driving force is reduced too much, it will degrade acceleration performance. Feedback control that reduces output driving force when front lift is detected is effective for optimizing this trade off, but increasing feedback gain too much to reduce front lift angle will cause output driving force to change suddenly, making for a less comfortable ride.

This paper represents the adaptation of turbo charger to single cylinder 450cc SI engine which is used for the student formula competition. The experiment and 1D engine simulation called as GT-Power were performed to confirm the effect of valve profile, compression ratio and air fuel ratio on the engine performance under the naturally aspirated condition. The maximum valve lift of the intake valves increased 27% and that of the exhaust valves increased 15% as compared with the low profile cam. The compression ratio was increased from 12.3 to 13.5 by changing the piston top land length in order to improve the thermal efficiency. It was confirmed that the torque peak was moved from 6000 rpm to 8000 rpm by changing the valve profile. Furthermore, turbo charger was adapted to the engine as changing the capacity of the turbocharger, the maximum boost pressure and the air fuel ratio.

Described here is the tuning of the combustion systems of a precombustion chamber diesel engine for lower level of exhaust gas emission. The key points of the tuning are the decrease of the prechamber volume, the selection of the combustion chamber configuration, the injection nozzle characteristics and the optimum injection timing. It was made clear, in the results of investigation, that the degradation of lubricating oil and the cavitation pitting on the outer wall of cylinder liner were directly concerned with the combustion characteristics of low emission systems. And both problems have been solved. The result of combustion tuning of the engine shows less than 5 g/hp-h of NOx + HC with CARB 13 mode test cycle without deterioration of performance nor durability.