Search Results

Abstract In urban roads the engine speed and the load vary suddenly and frequently, resulting in increased exhaust emissions. In such operations, the effect of air injection technique to access the transient response of the engine is of great interest. The effectiveness of air injection technique in improving the transient response under speed transient is investigated in detail [1]; however, it is not evaluated for the load transients. Load step demand of the engine is another important event that limits the transient response of the turbocharger. In the present study, response of a heavy-duty turbocharged diesel engine is investigated for different load conditions. Three cases of load transients are considered: constant load, load magnitude variation, and load scheduling. Air injection technique is simulated and after optimization of injection pressure based on orifice diameter, its effect on the transient response is presented.

Abstract Diesel engines include systems for cooling, lubrication, and fuel injection and contain a variety of components. A malfunction in any of the engine systems or the presence of any faulty element influences engine performance and deteriorates its components. This research is concerned with the untimely appearance of vital cracks in the liners of a turbocharged heavy-duty Diesel engine. To find the root causes for premature failure, rigorous examinations through visual observations, material characterization, and metallographic investigations are performed. These include Scanning Electron Microscope (SEM) and Energy-Dispersive Spectroscopy (EDS), fracture mechanics analysis, and performance examination, which are also followed by Finite Element Moldings. To find the proper remedy to resolve the problem, drawing a precise and reliable picture of the engine’s operating conditions is required.

Abstract Combustion engines and liquid fuels are likely to continue playing a central role in freight transportation with renewable fuels reducing carbon emissions. Ethanol and methanol are future renewable fuels with a knock resistance that make them suitable for heavy-duty (HD) spark ignition (SI) engines. This simulation work focuses on the potential for improving the efficiency of an ethanol- and methanol-fueled HD SI engine using early intake valve closing Miller valve timing. With Miller valve timing, the expansion ratio and thermodynamic efficiency can be increased while maintaining the same effective compression ratio. However, Miller timing requires increased boost pressure to retain the same trapped air mass and also suffers from reduced in-cylinder turbulence.

Abstract Different aftertreatment systems consisting of a combination of selective catalytic reduction (SCR) and SCR catalyst on a diesel particulate filter (DPF) (SCR-F) are being developed to meet future oxides of nitrogen (NOx) emissions standards being set by the Environmental Protection Agency (EPA) and the California Air Resources Board (CARB). One such system consisting of a SCRF® with a downstream SCR was used in this research to determine the system NOx reduction performance using experimental data from a 2013 Cummins 6.7L ISB diesel engine and model data. The contribution of the three SCR reactions on NOx reduction performance in the SCR-F and the SCR was determined based on the modeling work. The performance of a SCR was simulated with a one-dimensional (1D) SCR model. A NO2/NOx ratio of 0.5 was found to be optimum for maximizing the NOx reduction and minimizing NH3 slip for the SCR for a given value of ammonia-to-NOx ratio (ANR).

Abstract The present study evaluates the effect of engine speed, exhaust gas recirculation (EGR), and compression ratio on conventional diesel combustion (CDC) and two isobaric combustion cases, by utilizing multiple injection strategies. The experiments were conducted in a Volvo D13C500 single-cylinder, heavy-duty engine, fuelled with standard European Union (EU) diesel fuel. The engine was operated at three different speeds of 1200, 1500, and 1800 revolutions per minute (rpm). For each engine speed and combustion cases, the EGR rate was varied from 0% to 40%. The low-pressure isobaric combustion (IsoL) and high-pressure isobaric combustion (IsoH) were maintained at peak cylinder pressure (PCP) of 50 and 68 bar, respectively, which was representative of the peak motoring pressure (PMP) and PCP of CDC. This was possible by adjusting the intake air pressure to 1.7 and 2.3 bar—absolute for IsoL and IsoH, respectively, at 1200 rpm.

Abstract TOC

Abstract TOC

Abstract TOC

Abstract Previous studies have shown that injector aging adversely affects the diesel engine spray formation and combustion. It has also been shown that the oxygenated fuel additive tripropylene glycol monomethyl ether (TPGME) can lower soot emissions. In this study, the effects of injector aging and TPGME on the late-cycle oxidation of soot were investigated using laser diagnostic techniques in a light-duty optical diesel engine at two load conditions. The engine was equipped with a quartz piston with the same complex piston geometry as a production engine. Planar laser-induced incandescence (LII) was used to obtain semiquantitative in-cylinder two-dimensional (2D) soot volume fraction (fv ) distributions using extinction measurements. The soot oxidation rate was estimated from the decay rate of the in-cylinder soot concentration for differently aged injectors and for cases with and without TPGME in the fuel.

Abstract Commercial vehicles require continual improvements in order to meet fuel consumption standards, improve diesel aftertreatment (AT) system performance, and optimize vehicle fuel economy. Simultaneous reductions in both CO2 and NOX emissions will be required to meet the upcoming regulatory targets for both EPA Phase 2 Greenhouse Gas Standards and new Low NOX Standards being proposed by the California Air Resources Board (CARB). In addition, CARB recently proposed a new certification cycle that will require high NOX conversion while vehicles are operating at lower loads than current regulatory cycles require. Cylinder deactivation (CDA) offers a powerful technology lever for meeting these two regulatory targets on commercial diesel engines. There have been numerous works in the past year showing the benefits of diesel CDA for elevating exhaust temperatures during low-load operation where it is normally too cold for AT to function at peak efficiency.

Abstract Late-cycle soot oxidation in heavy-duty (HD) diesel engine low-swirl combustion was investigated using single-cylinder engine and spray chamber experiments together with engine combustion simulations. The in-cylinder flow during interactions between adjacent flames (flame-flame events) was shown to have a large impact on late-cycle combustion. To modify the flame-flame flow, a new piston bowl shape with a protrusion (wave) was designed to guide the near-wall flow. This design significantly reduced soot emissions and increased engine thermodynamic efficiency. The wave’s main effect was to enhance late-cycle mixing, as demonstrated by an increase in the apparent rate of heat release after the termination of fuel injection. Combustion simulations showed that the increased mixing is driven by enhanced flow re-circulation, which produces a radial mixing zone (RMZ).

Abstract Asymmetric twin-scroll turbocharging technology, as one of the effective technologies for balancing fuel economy and nitrogen oxide emissions, has been widely studied in the past decade. In response to the ever-increasing demands for improved fuel efficiency and reduced exhaust emissions, extensive research efforts have been dedicated to investigating various aspects of this technology. Researchers have conducted both experimental and simulation studies to delve into the intricate flow mechanism of asymmetric twin-scroll turbines. Furthermore, considerable attention has been given to exploring the optimal matching between asymmetric twin-scroll turbines and engines, as well as devising innovative flow control methods for these turbines. Additionally, researchers have sought to comprehend the impact of exhaust pulse flow on the performance of asymmetric twin-scroll turbines.

Abstract Heavy vehicles are essential for the modern economy, delivering critical food, supplies, and freight throughout the world. Connected heavy vehicles are also driven by embedded computers that utilize internal communication using common standards. However, some implementations of the standards leave an opening for a malicious actor to abuse the system. One such abuse case is a cyber-attack known as the “Address Claim Attack.” Proposed in 2018, this attack uses a single network message to disable all communication to and from a target electronic control unit, which may have a detrimental effect on operating the vehicle. This article demonstrates the viability of the attack and then describes the implementation of a solution to prevent this attack in real time without requiring any intervention from the manufacturer of the target devices. The defense technique uses a bit-banged Controller Area Network (CAN) filter to detect the attack.

Abstract In the last few years, reactivity-controlled compression ignition (RCCI) mode combustion has gained researchers’ attention due to its superior performance, combustion, and emission characteristics compared to other low-temperature combustion (LTC) strategies. In this study, RCCI mode combustion investigations were carried out to explore the effects of exhaust gas recirculation (EGR) and intake charge temperature (ICT) on combustion, performance, and emission characteristics of a mineral diesel/methanol-fueled engine. In this study, constant engine speed (1500 rpm) and load (3 bar brake mean effective pressure [BMEP]) were used to perform engine experiments. The premixed ratio (rp) of methanol was varied from rp = 0 to rp = 0.75, where rp = 0 represents the baseline compression ignition (CI) mode combustion. At all rp, EGR rate and ICT were varied from 0 to 30% and 40° to 80°C, respectively.

Abstract In view of the fact that the current positioning methods of railway fasteners are easily affected by illumination intensity, bright spots, and shadows, a positioning method with relative grayscale invariance is proposed. The median filter is used to remove the noise in order to reduce the adverse effects on the subsequent processing results, and the baffle seat edge features are enhanced by improved Census transform. The mean-shift clustering algorithm is used to classify the edges to weaken the interference by short lines. Finally, the Hough transform is used to quickly extract the linear feature of the baffle seat edge and achieve the exact position of the fastener with the prior knowledge. Experimental results show that the proposed method can accurately locate and have good adaptability under different illumination conditions, and the position accuracy is increased by 4.3% and 8%, respectively, in sunny and rainy days.

Abstract The interest of long-hauling companies about the conversion of their fleets into low-emission and fuel-efficient vehicles is growing, and retrofitting options may represent a suitable solution. Powertrain hybridization and waste heat recovery are considered among the most promising methods to further improve the fuel economy of road vehicles powered by internal combustion engines. In this article, not only the effect of retrofitting a heavy-duty truck with an electrification-oriented ORC unit or with a series hybrid system is investigated, but also the possibility of implementing both at the same time. The conventional vehicle is powered by a heavy-duty 12.6 liters diesel engine. It is shown that, despite such a large engine has high potential for waste heat recovery, on the other hand it represents a very challenging constraint when designing a hybrid retrofitting.

Abstract Diesel-fueled compression ignition engines display a distinct trade-off in particulate matter (PM) and nitrogen oxide (NOX) emissions due to the nature of diffusive combustion. The modification of fuel properties has drawn much attention since these methods offer additional potential to reduce emissions. Oxygenated fuels are reported to greatly diminish particle emissions while water emulsification of regular diesel causes a significant decrease in NOX. However, recent studies indicate that these fuel-based approaches may lead to an increase in nanoparticle emissions, which are known to be more dangerous to human health than large particles. This has raised the question about whether current engine technology is prone to nanoparticle formation. In this work, the authors present a detailed study on combustion and emission performance of the oxygenate fuel Oxymethylene Ether (OME n , the mixture contains neat OME with chain length n = 2 − 6).

Abstract The proven impact of combustion chamber deposits, CCD, on advanced compression ignition, ACI, combustion strategies has spurred researchers to develop thermal barrier coatings, TBC, which can mimic CCD benefits on combustion efficiency and operational range expansion. However, application of TBCs within multi-mode engines exposes them to non-negligible soot radiation. In the present paper, the impact of radiation heat transfer on combustion chamber deposits is studied. The morphological construction of the combustion chamber deposit layer is shown to be partially transparent to radiation heat transfer, drawing corollaries with ceramic-based TBCs. Additional experimentation eliminates the optical transparency of CCD to reveal an “effective radiation penetration depth” facilitated by open surface porosity. The effective radiation penetration depth is then utilized to establish the relative communicating porosity of CCD and a magnesium zirconate TBC.

Abstract Due to the nature of diffusive combustion, diesel engines display a distinct trade-off between nitrogen oxide (NOX) and particulate matter (PM). Since emission regulations become ever stricter, the relevance of dissolving this trade-off increases steadily as it hinders engine development from achieving ultralow emission levels. Seeking new opportunities to approach the problem, the modification of fuel properties has gained much attention. In particular, oxygenated fuels reduce particle emissions drastically, while having little adverse impact on NOX. Similarly, water (H2O) emulsification of diesel is commonly reported to reduce both NOX and PM. Both methods appear very promising, yet only few investigations were conducted in an effort of combing the benefits of the two. With this work, the authors provide a detailed study on combustion and emissions for both neat oxymethylene ethers (OME2-OME5) and an H2O-emulsified OME mixture (OMEmix).

Abstract Aside from aerosols produced during the combustion of fossil fuels, the oil mist vented through the crankcase breather of the engine is considered as a threat to the environment or, in case of closed ventilation systems, to the functionality of the engine. In the past, these “blow-by” aerosols have been investigated mainly from the perspective of emitted oil mass. This study instead focuses on sources and reduction of fine aerosols in the size range of about 0.2-5 μm, where number concentrations are of equal importance. The investigation is conducted on a commercial truck diesel engine; aerosols are sampled with an optical particle counter at various locations along the blow-by path, in the region of the cylinder head before and after the oil aerosol separation system. The contribution of the turbocharger to the total aerosol load is found to be 24% by number and 21% by mass. The air compressor adds 8%-20% concerning number and mass only depending on the engine load.