Refine Your Search

Date

Date

Topic

Topic

Author

Author

Tools and equipment Optics Microscopy Commercial Vehicle Hardware Standard Diesel / compression ignition engines

Search Results

Viewing 1 to 20 of 225
123Next >Last >>
Sort by title
Standard

Windshield Defrosting Systems Test Procedure and Performance Requirements—Trucks, Buses, and Multipurpose Vehicles
2000-09-29
HISTORICAL
J381_200009
This SAE Recommended Practice establishes uniform test procedures and performance requirements for the defrosting system of enclosed cab trucks, buses, and multipurpose vehicles. It is limited to a test that can be conducted on uniform test equipment in commercially available laboratory facilities. Current engineering practice prescribes that for laboratory evaluation of defroster systems, an ice coating of known thickness be applied to the windshield and left- and right-hand side windows to provide more uniform and repeatable test results, even though under actual conditions such a coating would necessarily be scraped off before driving. The test condition, therefore, represents a more severe condition than the actual condition, where the defroster system must merely be capable of maintaining a cleared viewing area.
Standard

Wide Base Disc Wheels and Demountable Rims - Truck, Bus, and Trailer
2021-08-02
CURRENT
J876_202108
This SAE Recommended Practice establishes uniform engineering nomenclature for wide base disc wheels and demountable rims. This nomenclature and accompanying figures are intended to define fundamental wide base disc wheel and demountable rim terms. The dimensions given are those necessary to maintain serviceability and interchangeability of the wide base disc wheels and demountable rims with standard hardware. Valve clearances have not been included in this document.
Standard

Wide Base Disc Wheels and Demountable Rims
2007-04-30
HISTORICAL
J876_200704
This SAE Recommended Practice establishes uniform engineering nomenclature for wide base disc wheels and demountable rims. This nomenclature and accompanying figures are intended to define fundamental wide base disc wheels and demountable rim terms. The dimensions given are those necessary to maintain serviceability and interchangeability of the wide base disc wheels and demountable rims with standard hardware. Valve clearances have not been included in this document.
Standard

Wheel Chocks
2020-10-19
CURRENT
J348_202010
This SAE standard presents the basic information required for the design and manufacture of a wheel chock.
Standard

Vehicle Electronic Programming Stations (VEPS) System Specification for Win32™
2010-02-05
HISTORICAL
J2461_201002
SAE J2461 specifies the recommended practices of a Vehicle Electronics Programming Stations (VEPS) architecture.in a Win32™ environment. This system specification, SAE J2461, was a revision of the requirements for Vehicle Electronics Programming Stations (VEPS) set forth in SAE J2214, Vehicle Electronics Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants (Cancelled Jun 2004). The J2214 standard has been cancelled indicating that it is no longer needed or relevant.
Standard

Vehicle Electronic Programming Stations (VEPS) System Specification for Win32™
2002-08-29
HISTORICAL
J2461_200208
This system specification, SAE J2461, revises the requirements for Vehicle Electronics Programming Stations (VEPS) set forth in SAE J2214, Vehicle Electronics Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants. SAE J2461 specifies the recommended practices for a Win32™ environment while maintaining the core VEPS architecture specified in SAE J2214.
Standard

Vehicle Electronic Programming Stations (VEPS) System Specification for Win32®
2022-11-22
HISTORICAL
J2461_202211
SAE J2461 specifies the recommended practices of a Vehicle Electronics Programming Stations (VEPS) architecture.in a Win32® environment. This system specification, SAE J2461, was a revision of the requirements for Vehicle Electronics Programming Stations (VEPS) set forth in SAE J2214, Vehicle Electronics Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants (Cancelled Jun 2004). The J2214 standard has been cancelled indicating that it is no longer needed or relevant.
Standard

Vehicle Electronic Programming Stations (VEPS) System Specification for Win32®
2013-09-23
HISTORICAL
J2461_201309
SAE J2461 specifies the recommended practices of a Vehicle Electronics Programming Stations (VEPS) architecture.in a Win32® environment. This system specification, SAE J2461, was a revision of the requirements for Vehicle Electronics Programming Stations (VEPS) set forth in SAE J2214, Vehicle Electronics Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants (Cancelled Jun 2004). The J2214 standard has been cancelled indicating that it is no longer needed or relevant.
Standard

Torque Ratings for Power Take-off Mounting Pads
2003-07-25
HISTORICAL
J2662_200307
This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.
Standard

Thermal Flow Control Valve Nomenclature and Application
2018-11-02
CURRENT
J3142_201811
The purpose of this SAE Information Report is to define common industry terminology and nomenclature relative to thermal flow control valves and to describe common thermal flow control valve applications in automotive, highway truck, mobile construction equipment, and industrial applications. This document is primarily directed at internal combustion engine or electric powered applications and the downstream systems to which power is provided, such as transmissions, hydraulics, air compression, etc. The information contained herein does not constitute an SAE Standard.
Standard

Telescopic Boom Length Indicating System
2012-05-02
HISTORICAL
J1180_201205
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices.
Standard

Telescopic Boom Length Indicating System
2019-02-15
CURRENT
J1180_201902
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices.
Standard

Technical Publications for Off-Road Self-Propelled Work Machines
2013-10-29
CURRENT
J920_201310
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
Standard

Technical Publications for Off-Road Self-Propelled Work Machines
2021-04-14
WIP
J920
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
Standard

TRAILER TOW BAR EYE
1984-08-01
HISTORICAL
J847_198408
This SAE Recommended Practice applies to all highway trailer tow bar eye applications.
Standard

TEST PROCEDURE FOR THE MEASUREMENT OF GASEOUS EXHAUST EMISSIONS FROM SMALL UTILITY ENGINES
1993-02-01
HISTORICAL
J1088_199302
This SAE Recommended Practice specifies a uniform procedure for the evaluation of gaseous exhaust emissions from small utility engines typically less than 20 kW. Details of engine test setup and exhaust gas analysis techniques are specified with the intent of providing a uniform and reproducible method of measurement. The intent has been to allow as much flexibility as possible in the physical construction of the experimental apparatus. Therefore, only those portions of the apparatus whose operation is critical to the accurate measurement of emissions levels are prescribed in detail. An engine test procedure including a test sequence is outlined such that it would cover the various applications in which small engines are used. The intent is to provide an understanding of the levels of exhaust emissions and does not imply that in a given application, an engine would operate in all the modes outlined in the test procedure.
Standard

TELESCOPIC BOOM LENGTH INDICATING SYSTEM
1977-03-01
HISTORICAL
J1180_197703
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices.
Standard

TELESCOPIC BOOM LENGTH INDICATING SYSTEM
1980-10-01
HISTORICAL
J1180_198010
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices.
123Next >Last >>
X