This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.
Side stands and center stands are designed to support stationary two-wheel motorcycles. This SAE Standard establishes procedures for determining parking surface loading and stability limits as follows: a. The footprint pressure exerted on a horizontal parking surface by the stand. b. The tilt angle of the parking surface at which tip-over occurs. c. The tilt angle of the parking surface at which roll-off occurs.
Side stands and center stands are designed to support stationary two-wheel motorcycles. This SAE Standard establishes procedures for determining parking surface loading and stability limits as follows: a The footprint pressure exerted on a horizontal parking surface by the stand. b The tilt angle of the parking surface at which tip-over occurs. c The tilt angle of the parking surface at which roll-off occurs.
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of self-propelled work machines (Categories 1, 2, 3, 4, and 5 of SAE J1116 JUL85). Advertising and pre-purchase publications are not included.
This SAE Recommended Practices specifies a procedure for determining structural strength and fatigue life of disc-brake caliper assemblies which are satisfactory for vehicle usage. It is applicable to new caliper assemblies which are employed in passenger car and truck brake systems utilizing hydraulic brake fluids. Brake design and vehicle performance requirements are not included. Specification limits are left to the discretion of the responsible manufacturer. This procedure was developed for base brake operation and does not consider some unusual effects of ABS (Anti-Lock-Brake System) or Traction Control systems which may have a significant effect on the caliper. Careful analysis of the particular type ABS and/or Traction Control should be made and additional tests may be required which are not included in this document.
This SAE Standard applies to all types of heavy-duty storage batteries for use on off-road machines as described in SAE J1116. Included are definitions of industry terms, test procedures, general requirements, application recommendations, standard sizes, overall dimensions, and electrical values.
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
This SAE Recommended Practice describes requirements for lamps, reflective devices, and associated equipment for signaling to enable safe operation in darkness and other conditions of reduced visibility.
This SAE Standard covers both quality assurance and installation requirements for fasteners. This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity. This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.
This SAE Parts Standard provides dimensional and quality assurance requirements for M6 through M36 metric sizes of studs in the following configurations in materials needed for ship system applications: a Continuous thread studs in M thread profile. b Double end studs—clamping type (also called bolt-studs) where both ends are of the same thread series but different lengths (M thread profile).
This SAE Parts Standard provides dimensional and quality assurance requirements for M6 through M36 metric sizes of studs in the following configurations in materials needed for ship system applications: a Continuous thread studs in M thread profile. b Double end studs—clamping type (also called bolt-studs) where both ends are of the same thread series but different lengths (M thread profile).