Refine Your Search

Date

Date

Topic

Topic

Commercial Vehicle Environment Manufacturing processes Test procedures Design Engineering and Styling Aerodynamics Tires MTC1, Earthmoving Machinery

Search Results

Viewing 1 to 20 of 51
123Next >Last >>
Sort by title
Standard

Travel Performance and Rating Procedure, Crawler Mounted Hydraulic Excavators, Material Handlers, Knuckle Boom Log Loaders, and Certain Forestry Equipment
2012-01-06
CURRENT
J1309_201201
This SAE Standard describes a uniform method to calculate and specify travel performance characteristics of hydraulic excavators, material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to crawler mounted machines such as hydraulic excavators as defined in SAE J/ISO 6165 and ISO 7135, and knuckle boom log loaders as defined in SAE J1209 and SAE J2055. This document also applies to certain forestry equipment defined in SAE J1209 and ISO 6814 that have crawler mountings such as delimbers, feller bunchers, harvesters, and processors. Included in the definition of hydraulic excavators are also front shovel, clamshell, and telescoping boom excavators.
Standard

Specification Definitions - Hydraulic Backhoes
2018-11-14
HISTORICAL
J49_201811
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard

Rated Operating Load for Loaders Equipped with Log or Material Forks without Vertical Mast
2002-10-31
HISTORICAL
J1197_200210
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders
2007-04-30
HISTORICAL
J818_200704
This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard

Metric Countersunk Holes for Cutting Edges and End Bits
2011-10-27
CURRENT
J1580_201110
this document is to be used on cutting edges and end bits in conjunction with metric bolts (reference ISO 7852-1982) typically used on off-road, self-propelled work machines as described in SAE J1116. The cutting edges are further defined in SAE J737, J739, J1304, and J1581. The end bits are further defined in SAE J63.
Standard

Machine Slope Operation Test Code
2003-05-12
CURRENT
J897_200305
This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.
Standard

METRIC COUNTERSUNK HOLES FOR CUTTING EDGES AND END BITS
1989-12-01
HISTORICAL
J1580_198912
this document is to be used on cutting edges and end bits in conjunction with metric bolts (reference ISO 7852-1982) typically used on off-road, self-propelled work machines as described in SAE J1116. The cutting edges are further defined in SAE J737, J739, J1304, and J1581. The end bits are further defined in SAE J63.
Standard

Loading Ability Test Procedure—Scrapers
2006-02-05
HISTORICAL
J764_200602
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)
Standard

Loading Ability Test Procedure - Scrapers
2011-10-27
CURRENT
J764_201110
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)
Standard

Lift Capacity Calculation and Test Procedure-Pipelayer and Sideboom
2011-12-08
CURRENT
J743_201112
This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.
Standard

LOADING ABILITY TEST CODE—SCRAPERS
1977-06-01
HISTORICAL
J764_197706
The code applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See J1116 and J1057a.) The loading procedure is limited to standing starts in order to reduce the number of variables that are difficult to control and measure. Because of the difficulties in controlling some of the other variables, meaningful numerical comparison of time and load from scraper to scraper requires that data be taken at the same time and place, and that the units being compared be of approximately equal capacity.
Standard

LOADING ABILITY TEST CODE--SCRAPERS
1985-11-01
HISTORICAL
J764_198511
The code applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.) The loading procedure is limited to standing starts in order to reduce the number of variables that are difficult to control and measure. Because of the difficulties in controlling some of the other variables, meaningful numerical comparison of time and load from scraper to scraper requires that data be taken at the same time and place, and that the units being compared be of approximately equal capacity.
Standard

Identification Terminology of Loaders/Tractors with Forks and Rough Terrain Forklifts
2004-10-18
CURRENT
J1464_200410
This SAE Recommended Practice defines machines equipped with forks for material handling, which are intended for use on unimproved or disturbed terrain. (Reference J1116, Categories 1, 2 or 6.) Purpose To identify types of machines, which use forks as working tools, while being used on unimproved surfaces. The machines are grouped as follows: loaders/tractors with forks and rough terrain forklifts. These groupings are used in identifying the organization responsible for applicable standards.
Standard

Hydraulic Excavator Lift Capacity Calculation and Test Procedure
2008-04-14
CURRENT
J1097_200804
This standard provides a uniform method to calculate and a test procedure to validate hydraulic excavator lift capacity. It establishes definitions and specifies machine conditions for calculations in Section 1 and identifies the validating test procedure in Section 2.
123Next >Last >>
X