Search Results

Affordable, efficient and durable catalytic converters for the Commercial Vehicle and Non-Road industry in all countries are required to reduce vehicle emissions under real world driving conditions and fulfill future legal requirements. Specially for India traffic conditions and payload to engine size conditions new cost-effective solutions are needed to participate in a cleaner and healthier environment. Metallic substrates with structured foils like the Transversal StructureTM (TS) or the Longitudinal StructureTM (LS) have been proved to be capable of improving conversion behavior, even with smaller catalyst size. Now Vitesco Technologies is developed a new Substrate for Heavy duty applications that specifically maintains the geometric surface area at a very high level and improves further the mass transport of the pollutants, which potentially leads together to very high pollutant conversion rates.

Career development planning is critical to getting the most out of one's working years. It should start when one starts a career, but even if you start in mid-career, it's not too late. For those who haven't done it, career planning may seem difficult and confusing. Increasingly, your community library and state employment service agency provides valuable help in the form of computerized and manual aids to career planning and job-getting. This article follows Dave Brown, a mid-career engineer, through the career-planning process, introduces library and government resources to you and provides a list of computer programs relating to career planning and job getting.

Work solenoids are widely used in household appliances. The environment and design of this type application does not lead to solenoids for the earthmoving industry. This paper presents the environmental effects to be considered when designing a solenoid for the earthmoving industry. It further explains the need for, and type of, test necessary to validate the design. Finally a review of production quality procedures, necessary to insure reliable production parts is discussed.

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on construction, agricultural, and general purpose industrial categories of off-road self-propelled work machines as defined in SAE J1116.

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on construction, agricultural, and general purpose industrial categories of off-road self-propelled work machines as defined in SAE J1116.

Knitted wiremesh along with radial gas tight seals provide reliable mounting system for low temperature underbody converters. The compression characteristics of the wiremesh is modified by wire material, wire diameter, wire geometry, mesh crimp heights; wire density, wiremesh courses per inch, needle count, number of strands, wiremesh temper, wiremesh surface profile and surface characteristics. The radial mounting pressure provided by the wiremesh is matched with the mounting pressure requirement. Wiremesh systems can be tailored to any required radial mounting pressure from conventional to ultra thin-wall substrates. The wiremesh mounting system is proven durable, without any failure on more than 25 million underbody converters in light duty vehicles. Cp and Cpk show the capability of the manufacturing process. Thus the wiremesh mounting support is a viable alternate for low temperature gasoline and diesel applications.

SINCE 1954 the CIMTC Subcommittee has been engaged in a program to meet military requirements through industry's production of construction equipment which can give satisfactory cold weather performance down to temperatures of −65 F. Individual contracts for three crawler tractors and one motor grader were negotiated by ERDL for these projects, and their performance is discussed. Industry participation was subsequently expanded to include engineering tests in the cold weather conditions of the Mesabi Iron Range. This joint report of the Winterization Sub-committee of the CIMTC and ERDL Winterization Section consists of separate papers by various members and consultants of this Sub-committee and ERDL personnel.

This SAE Recommended Practice establishes uniform engineering nomenclature for wide base disc wheels and demountable rims. This nomenclature and accompanying figures are intended to define fundamental wide base disc wheel and demountable rim terms. The dimensions given are those necessary to maintain serviceability and interchangeability of the wide base disc wheels and demountable rims with standard hardware. Valve clearances have not been included in this document.

This SAE Recommended Practice establishes uniform engineering nomenclature for wide base disc wheels and demountable rims. This nomenclature and accompanying figures are intended to define fundamental wide base disc wheels and demountable rim terms. The dimensions given are those necessary to maintain serviceability and interchangeability of the wide base disc wheels and demountable rims with standard hardware. Valve clearances have not been included in this document.

Since 1992, Caterpillar has invested millions of dollars to purchase CAD software, and spends nearly $2M per year keeping its engineers up-to-date, via instructor lead training (ILT), as new enhancements are introduced. Periodic upgrades to the software also require huge resource (people, costs) commitments for the planning and execution of the training requirements required for a large global workforce. This paper will examine gaps uncovered in the efficiency and effectiveness of the current training process, and the cultural change required as a result of switching from an instructor led environment to a completely web-based solution, which, once deployed, had promised to change the way Caterpillar approached training for the future. The proposed change promised to improve human resource capability by utilizing new technological capabilities, and resulted in improvements in organizational capabilities as well.

HIGH output per cubic inch of piston displacement is desirable not alone for the purpose of being able to transport more payload faster, but more particularly for the invariably associated byproduct of lower specific fuel consumption, and especially at road-load requirements. The only way of accomplishing this purpose is through the use of higher compression ratios, and the limiting factors for this objective are fuel distribution and the operating temperatures of the component parts. A manifold is proposed which not only definitely improves distribution at both full and road loads, but has the inherent additional advantage of reducing the formation of condensate, thus still further facilitating a reduction in road-load specific fuel consumption. Hydraulic valve lifters, obviation of mechanical and thermal distortion, and controlled water flow are the essentials in improved cooling.

Innovation in oceangoing freight transportation is paying benefits to the general public, the shipper, the consignee, to direct labor, and to associated industries and their labor. Government, too, is sharing in the fruits of innovation. However, ocean transportation, which constitutes the prime investors, has been denied a fair share of the benefits and has, in fact, been exposed to greater risk when the operation is interrupted for any reason.

The wheel motor is a combination of hydro-motor and planetary transmission. Industrial, agricultural, construction and various types of public utility vehicles, which due to their design cannot use axle drives, make increasing use of the individual wheel drive. Speed, torque transmission, wheel bearings, valves for hydraulic operation and hydraulic engagement/disengagement are some of the requirements for wheel motor drives.

This recommended practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include axle spindle, bearing cones, bearing spacer, seal and wheel hub. This recommended practice is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, FL, R, N and P. SAE configurations FC, K, L, U, and W are not included, but may be added in the future.

In Automotive, Steel wheels are exponentially replaced by Aluminum wheels because of its feather light, agile performance and better acceleration. One such widely used size is 11.75 x 22.5 wheels for trucks and trailer segment. During the design stage of 11.75 x 22.5 wheel, the valve hole was placed away from the stress concentration zone to reduce the stress on the holes and also the design was validated through all conventional wheel rim testing methodologies (Like CFT, RFT and Bi-axial) and the wheel passed all the test requirements. During the field trials, failures were observed on the valve holes, despite of this hole was away from stress concentration region. Understood from the field trials that, the regular testing was not able to simulate the real field conditions for this particular size and changed the boundary condition in our FEA to simulate the actual conditions. After changing the boundary conditions, we could able to observe more stress in valve hole.

New technology placed on specific components within the wheel end system, required modifications to existing tapered wheel bearing adjustment procedures. A new method for vehicles, which use tapered roller bearings, required a procedure addressing new technologies for the wheel end system. OEM and service technicians would benefit from concise procedures. Technologies engineered and developed for ABS (Anti-skid Brake Systems), extended brake blocks and synthetic lubricants, required research for the data base. Research to optimize the operating environment through improved maintenance procedures helped in achieving optimum wheel system operation. A tapered wheel bearing adjustment procedure and visual chart are the results profiting the vehicle manufacturers and field service technicians.

Continuing education is important; in fact, it is absolutely necessary for the person or corporation that expects to be successful. Yet a lot of continuing education programs seem to be of little or no use as measured by the changes they effect in both people and companies. This study shows why so little success occurs, and makes suggestions to correct that shortfall. Good programs must be supported with time and resources provided by the employer. However, a truly successful continuing education program must be managed and driven by the individual. Otherwise, it will not pay off. The smart employer provides time and financial support, but expects the individual to direct his own career program.