Refine Your Search

Date

Date

Topic

Topic

MTC1, Earthmoving Machinery Identification Casting alloys Metals Commercial Vehicle Metallurgy

Search Results

Viewing 1 to 20 of 41
123Next >Last >>
Sort by title
Standard

Specification Definitions - Hydraulic Backhoes
2018-11-14
HISTORICAL
J49_201811
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard

Specification Definitions - Hydraulic Backhoes
2020-03-04
CURRENT
J49_202003
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard

Rated Operating Load for Loaders Equipped with Log or Material Forks without Vertical Mast
2002-10-31
HISTORICAL
J1197_200210
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
Standard

Nomenclature--Crawler Tractor
2002-02-21
CURRENT
J727_200202
This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Nomenclature - Rollers and Compactors
2011-10-27
CURRENT
J1017_201110
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. NOTE: Rollers and compactors will be defined in a section added to SAE J1057a.
Standard

NOMENCLATURE—ROLLERS AND COMPACTORS
1986-01-01
HISTORICAL
J1017_198601
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. See Figures 1 to 3.)
Standard

Loading Ability Test Procedure - Scrapers
2011-10-27
CURRENT
J764_201110
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)
Standard

Identification Terminology of Loaders/Tractors with Forks and Rough Terrain Forklifts
2004-10-18
CURRENT
J1464_200410
This SAE Recommended Practice defines machines equipped with forks for material handling, which are intended for use on unimproved or disturbed terrain. (Reference J1116, Categories 1, 2 or 6.) Purpose To identify types of machines, which use forks as working tools, while being used on unimproved surfaces. The machines are grouped as follows: loaders/tractors with forks and rough terrain forklifts. These groupings are used in identifying the organization responsible for applicable standards.
Standard

Identification Terminology of Earthmoving Machines
1999-05-01
CURRENT
J1057_199905
This standard sets forth accepted terminology to name and identify types of earthmoving machines, and is based upon existing commercial earthmoving machines. Illustrations are used to identify functional characteristics. The terminology establishes a name for a basic work machine such that it is not renamed when various components are mounted to it. For example, when a dozer is mounted on a 'tractor', the work machine can be referred to as 'tractor with dozer.'
Standard

IDENTIFICATION TERMINOLOGY—PIPELAYERS
1980-06-01
HISTORICAL
J1295_198006
This standard applies to machines which are designed to raise, lower, and carry pipe and loads of similar nature. The term pipelayer does not include tractors or loaders with side booms which are optional attachments, manufacturer or dealer-installed, to machines as defined in SAE J1057. Note: Some related standards will apply equally to pipelayers and to tractors and loaders with side boom. Two such standards are SAE J743 and ANSI B30.14.
Standard

Hole Spacing for Scraper and Dozer Cutting Edges
2006-02-01
HISTORICAL
J737_200602
This standard is intended for cutting edge sections used on: a Tractor-scrapers as described in SAE J1057 and J728. b Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation.
Standard

HOLE SPACING FOR SCRAPER AND DOZER CUTTING EDGES
1989-08-01
HISTORICAL
J737_198908
This standard is intended for cutting edge sections used on: a Tractor-scrapers as described in SAE J1057 and J728. b Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation.
123Next >Last >>
X