Search Results

Demonstrators and research projects about electric aircraft taxi systems testify the current interest in low- or zero-emission ground propulsion technologies to lower the overall fuel consumption and emissions of commercial flights. Electric motors fitted in the main landing gears are one of the most promising layouts for these systems especially for narrow-body commercial aircraft. From a control theory point of view, the aircraft on ground becomes an over-actuated plant through adoption of this technology, i.e. a commanded ground trajectory can be reached through different combinations of actuator efforts. A strategy is required to choose the most suitable of these combinations in order to reach the best efficiency. This work aims to investigate a strategy for an optimal control allocation during path-following of prescribed ground trajectories.

This paper describes a novel Thermal Management Function (TMF) and its design process developed in the framework of the Clean Sky project. This TMF is capable of calculating optimized control signals in real-time for thermal management systems by using model-based system knowledge. This can be either a physical model of the system or a data record generated from this model. The TMF provides control signals to the air and vapor cycle which are possible sources of cooling power, as well as load reduction or shedding signals. To determine an optimal cooling split between air cycle, vapor cycle, and its associated ram air channels, trade factors are being used to make electrical power offtake and ram air usage (i.e. drag) comparable, since both have influence on fuel consumption. An associated development process is being elaborated that enables a fast adaptation of the TMF to new architectures and systems. This will be illustrated by means of a bleedless thermal management architecture.

Intelligent software functions for energy management form a crucial element for aircraft electrical and thermal systems. In the electrical system, these are currently electrical load or power management functions that can cut and reconnect loads based on fixed priorities. The main aim of these functions is to prevent overload in failure mode of electrical generators, for example if one generator fails and another one has to take over its loads. For more-electric or all-electric aircraft, these functions should also cut loads during normal operation, since the electrical systems will not be sized to simultaneously provide maximum power to all loads. Additionally, energy management functions shall deal with multiple, parallel sources and should split power off-take in a way to reach maximum system efficiency. This paper provides an object-oriented tool and a method that enable a more intuitive development of an energy management function using economic models.

A number of promising technologies to perform ground movements without main engines are currently being researched. Notably, onboard ground propulsion systems have been proposed featuring electric motors in the landing gear. While such on-board systems will help save fuel and avoid emissions while on ground, they add significant weight to the aircraft, which has an impact on the performances in flight. A tool to assess the global benefits in terms of fuel consumption and emissions is presented in this work. A concept of an aircraft-integrated ground propulsion system is firstly considered and its performances and weights are determined, assuming the Auxiliary Power Unit or a zero-emission device like a fuel-cell as power source for the system. Afterwards, a model of the propulsion system integrated into an object-oriented, mid-sized aircraft model is generated, capable of precisely simulating a whole aircraft mission.

For thermal cabin control of commercial aircraft, the cabin is usually divided into a small number of temperature zones. Each zone features its own air supply pipe. The necessary installation space for ducting increases significantly with the number of zones. This requires the number of temperature zones to be low. Factors such as seating layout, galley placement and passenger density result in deviations in heat flux throughout the cabin. These deviations cannot be compensated by the control system, if they occur within the same temperature zone. This work presents a novel temperature regulation concept based on local mixing. In this concept, two main ducts span the complete cabin length, and provide moderately warm and cold air. At each temperature zone, cabin supply air is locally mixed using butterfly valves. In this way, the number of temperature zones can be individually scaled up without any additional ducting, only requiring additional valves for each temperature zone.