Search Results

An industry-wide interest has arisen with regards to the properties and capabilities of investment cast PH 13-8Mo corrosion resistant steel. Specifically of interest are the structural applications in the aerospace industry for this product heat treated to the H1000 condition. The objective of this AMEC cooperative test program was to generate and compile useful data for aerospace structural evaluation of investment cast PH 13-8Mo heat treated to H1000. The focus of the test program was the determination of overall mechanical properties, fatigue, fracture toughness, and crack growth data along with basic microstructural evaluation of the investment cast material. Additional objectives included the evaluation of mechanical property variations between cast and machined tensile specimens and evaluation of microstructural constituents. All testing was performed to determine the suitability of PH 13-8Mo, H1000 investment castings for use in the aerospace industry.

An industry-wide interest has arisen with regards to the properties and capabilities of investment cast PH 13-8Mo corrosion resistant steel. Specifically of interest are the structural applications in the aerospace industry for this product heat treated to the H1000 condition. The objective of this AMEC cooperative test program was to generate and compile useful data for aerospace structural evaluation of investment cast PH 13-8Mo heat treated to H1000. The focus of the test program was the determination of overall mechanical properties, fatigue, fracture toughness, and crack growth data along with basic microstructural evaluation of the investment cast material. Additional objectives included the evaluation of mechanical property variations between cast and machined tensile specimens and evaluation of microstructural constituents. All testing was performed to determine the suitability of PH 13-8Mo, H1000 investment castings for use in the aerospace industry.

This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.

This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.

This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.

This specification covers the engineering requirements for producing a thin tin coating on aluminum alloys by an immersion process.

This specification covers a procedure for revealing the macrostructure and microstructure of titanium alloys.

This specification covers a procedure for revealing the macrostructure and microstructure of titanium alloys.

This specification provides requirements and procedures for hydraulic-pressure leak testing of parts.

This specification covers the requirements for brush plating of zinc-nickel by electrodeposition.

This specification covers the engineering requirements and process for brush plating of zinc-nickel by electrodeposition. It is used, in conjunction with AMS 2451, for corrosion-protective, zinc-nickel deposits, which may allow omission of hydrogen embrittlement relief treatment of high-strength steel.

This specification covers the requirements for brush plating of zinc-nickel by electrodeposition.

This specification covers the requirements for brush plating of tin-zinc by electrodeposition.

This specification covers the requirements for brush plating of tin-zinc by electrodeposition.

This specification covers the engineering requirements and process for brush plating of tin-zinc by electrodeposition. It is used, in conjunction with AMS 2451, for corrosion-protective, tin-zinc deposits, which may allow omission of hydrogen embrittlement relief treatment of high-strength steels.

This specification covers the engineering requirements and process controls for selective plating of low-hardness, low-stress nickel by electrodeposition. It should be used, in conjunction with AMS 2451, for heat-resistant and corrosion-resistant nickel deposits.

This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.

This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.

This specification covers the requirements for brush plating of cobalt by electrodeposition.

This specification establishes the requirements for brush plating of cadmium by electrodeposition.