This Standard is intended to establish preferred abbreviations for use on panels, controls, instruments, displays, placards and markings. The recommendations apply to terms used in the flight deck of transport aircraft. The abbreviations, symbols and codes do not supersede those used in airworthiness regulations or aeronautical charts and documents. Where conflict is possible the operational context must be such as to resolve any ambiguity. If doubt exists, an alternative abbreviation or less truncated abbreviation should be used.
This document is intended to establish preferred abbreviations for use on panels, controls, instruments, displays, placards and markings. The recommendations apply to terms used in the flight deck of transport aircraft. The abbreviations, symbols and codes do not supersede those used in airworthiness regulations or aeronautical charts and documents. Where conflict is possible, the operational context must be such as to resolve any ambiguity. If doubt exists, an alternative abbreviation or less truncated abbreviation should be used.
This document specifies requirements for both an airborne Microwave Landing System (MLS) receiver and an MLS area navigation (MLS/RNAV) system. This equipment shall derive aircraft position and guidance for flight along precision three-dimensional paths within the MLS coverage.
This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.
This document recommends criteria for the installation and operation of a printer on the flight deck, to supply the flight crew with hard copies of information that originates from data sources such as FMS, ELS/EDMS, ACMS, CMS, and Data Link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.
This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.
This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.
This document recommends criteria and requirements for a flight management system (FMS) for transport aircraft. The FMS shall provide the functions of lateral navigation, vertical navigation, and performance management and may include time of arrival control. The FMS design shall take human factors considerations into account to produce a fault tolerant system.
This document recommends criteria and requirements for a Flight Management System (FMS) for transport aircraft. The FMS shall provide the functions of Lateral Navigation, Vertical Navigation, and Performance Management and may include Time of Arrival Control. The FMS design shall take Human Factors considerations into account to produce a fault tolerant system.
This annex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflight, Autothrottle, or Autothrust performance is compatible.
This document recommends criteria for standardizing flight deck interior doors and their operation to optimize their use under normal and emergency conditions.
This document is intended to specify the environmental conditions for transport aircraft necessary to permit the crew to perform their duties and functions in comfort, with minimum fatigue and no distraction. Environmental conditions should cause no short or long-term effects deleterious to health or physical well-being, nor significantly impair ability to perform normal or abnormal crew functions.
This document is intended to specify the environmental conditions for transport aircraft necessary to permit the crew to perform their duties and functions in comfort, with minimum fatigue and no distraction. Environmental conditions should cause no short or long-term effects deleterious to health or physical well-being, nor significantly impair ability to perform normal or abnormal crew functions.
This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.
This document recommends criteria and requirements for a Final Approach Spacing System (FASS) for transport aircraft. This is an Aerospace Recommended Practice to support the development of a Final Approach Spacing System (FASS) for Approach Spacing for Instrument Approaches (ASIA) operations.
This document recommends criteria for the installation and operation of a printer on the flight deck, to supply the flight crew with hard copies of information that originates from data sources such as FMS, ELS, ACMS, CMS, and Data Link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.
This document recommends criteria for the design and installation of Head-Up Display (HUD) systems. The recommendations are applicable to HUD systems which display flight information focused at infinity in the forward field of view. This annex does not address devices for peripheral vision or displays worn by the pilot (goggles, helmet sights).