Refine Your Search

Date

Date

Topic

Topic

Optics Vehicles, Equipment, and Performance Engine mechanical components Cetane MTC1, Earthmoving Machinery Trucks Diesel / compression ignition engines

Search Results

Viewing 1 to 20 of 88
123Next >Last >>
Sort by title
Standard

Specification Definitions—Loaders
2007-04-30
HISTORICAL
J732_200704
This SAE Standard provides uniform definitions of specification terms peculiar to loaders as defined in SAE J1057. The specifications must be qualified by stating the track shoe type, width or the tire type, size, ply, and specified inflation pressure; the model number or type of bucket disregarding teeth; and the type and amount of counterweight and/or ballast, if any, with which the machine is equipped. Paragraphs 4.1 to 4.16 are further defined by Figures 1 to 4. The figures are not intended to be exactly descriptive of any particular machine.
Standard

Specification Definitions - Hydraulic Backhoes
2018-11-14
HISTORICAL
J49_201811
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard

Specification Definitions - Hydraulic Backhoes
2012-07-16
HISTORICAL
J49_201207
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing, and are mounted on wheel tractors and crawler tractors.
Standard

Specification Definitions - Hydraulic Backhoes
2020-03-04
CURRENT
J49_202003
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard

SPECIFICATION DEFINITIONS—LOADERS
1992-06-01
HISTORICAL
J732_199206
This SAE Standard provides uniform definitions of specification terms peculiar to loaders as defined in SAE J1057. The specifications must be qualified by stating the track shoe type, width or the tire type, size, ply, and specified inflation pressure; the model number or type of bucket disregarding teeth; and the type and amount of counterweight and/or ballast, if any, with which the machine is equipped. Paragraphs 4.1 to 4.16 are further defined by Figures 1 to 4. The figures are not intended to be exactly descriptive of any particular machine.
Standard

SPECIFICATION DEFINITIONS-OFF-ROAD WORK MACHINES
1978-06-01
HISTORICAL
J1234_197806
This standard defines the more commonly used terms applicable to the majority of the machines defined in SAE J1057a and/or referenced by category in SAE J1116. Other SAE Standards will be used, when necessary, to define terms peculiar to a certain class or type of machine. Such other standards will be in accord with SAE J1234.
Standard

Rated Operating Load for Loaders Equipped with Log or Material Forks without Vertical Mast
2002-10-31
HISTORICAL
J1197_200210
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders Equipped with Log or Material Forks Without Vertical Mast
2011-10-27
CURRENT
J1197_201110
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders
2013-01-02
CURRENT
J818_201301
This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard

RATED OPERATING LOAD FOR LOADERS EQUIPPED WITH LOG OR MATERIAL FORKS WITHOUT VERTICAL MAST
1991-02-01
HISTORICAL
J1197_199102
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
123Next >Last >>
X