Search Results

Standard

WARNING LAMP ALTERNATING FLASHERS

1994-09-01

HISTORICAL

J1054_199409

This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6,12, and 24 V warning lamp alternating flashers.

Standard

WARNING LAMP ALTERNATING FLASHERS

1989-10-01

HISTORICAL

J1054_198910

This document defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V warning lamp alternating flashers.

Standard

WARNING LAMP ALTERNATING FLASHERS

1977-01-01

HISTORICAL

J1054_197701

Flashers referred to in this SAE recommended engineering design practice are for nominal 12 V circuits and are required to operate the maximum design load per output terminal as stated by the flasher manufacturer. This design practice is intended for use in conjunction with a supplementary Service Performance Standard for Warning Lamp Flashers (under development).

Standard

WARNING LAMP ALTERNATING FLASHERS

1973-09-01

HISTORICAL

J1054_197309

Flashers referred to in this SAE recommended engineering design practice are for nominal 12 V circuits and are required to operate the maximum design load per output terminal as stated by the flasher manufacturer. This design practice is intended for use in conjunction with a supplementary Service Performance Standard for Warning Lamp Flashers (under development).

Standard

VEHICULAR HAZARD WARNING SIGNAL FLASHER

1975-07-01

HISTORICAL

J945B_197507

Flasher(s) referred to in this SAE Recommended Practice are for nominal 12 V or 6 V d-c circuits and are required to operate from two signal lamps to the maximum design load including pilot lamps, as stated by the flasher manufacturer. It is an engineering design standard and is supplemented by SAE J1056 covering service performance requirements for vehicular hazard warning flashers.

Standard

VEHICULAR HAZARD WARNING SIGNAL FLASHER

1973-09-01

HISTORICAL

J945A_197309

Flasher(s) referred to in this SAE Recommended Practice are for nominal 12 V or 6 V d-c circuits and are required to operate from two signal lamps to the maximum design load including pilot lamps, as stated by the flasher manufacturer. It is an engineering design standard and is supplemented by SAE J1056 covering service performance requirements for vehicular hazard warning flashers.

Standard

VEHICULAR HAZARD WARNING SIGNAL FLASHER

1977-01-01

HISTORICAL

J945B_197701

Flasher(s) referred to in this SAE Standard are for nominal 12 V or 6 V d-c circuits and are required to operate from two signal lamps to the maximum design load including pilot lamps, as stated by the flasher manufacturer. It is an engineering design standard and is supplemented by SAE J1056 covering service performance requirements for vehicular hazard warning flashers.

Standard

VEHICULAR HAZARD WARNING SIGNAL FLASHER

1987-06-01

HISTORICAL

J945_198706

This recommended practice defines the test conditions, procedures and minimum design requirements for nominal 6, 12 and 24 volt hazard warning signal flashers.

Standard

VEHICULAR HAZARD WARNING FLASHERS

1993-06-01

HISTORICAL

J945_199306

This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V hazard warning flashers.

Standard

TURN SIGNAL OPERATING UNITS

1964-04-01

HISTORICAL

J589_196404

Standard

TURN SIGNAL OPERATING UNITS

1960-03-01

HISTORICAL

J589_196003

Standard

TURN SIGNAL FLASHERS

1968-04-01

HISTORICAL

J590C_196804

Flashers referred to in this SAE Standard are for nominal 12 or 6 dc circuits and are intended to operate at the design loads for the turn signal system as stated by the manufacturer.

Standard

TURN SIGNAL FLASHERS

1986-07-01

HISTORICAL

J590_198607

This recommended practice defines the test conditions, procedures and minimum design requirements for nominal 6, 12 and 24 volt turn signal flashers.

Standard

TURN SIGNAL FLASHERS

1977-01-01

HISTORICAL

J590E_197701

Flasher(s) referred to in this SAE Standard are for nominal 12 V or 6 V d-c circuits and are intended to operate at the design load(s) for the turn signal system as stated by the flasher manufacturer. It is an engineering design standard and is supplemented by SAE J1055 covering service performance requirements for turn signal flashers.

Standard

TURN SIGNAL FLASHERS

1975-07-01

HISTORICAL

J590E_197507

Flasher(s) referred to in this SAE Standard are for nominal 12 V or 6 V d-c circuits and are intended to operate at the design load(s) for the turn signal system as stated by the flasher manufacturer. It is an engineering design standard and is supplemented by SAE J1055 covering service performance requirements for turn signal flashers.

Standard

TURN SIGNAL FLASHERS

1973-09-01

HISTORICAL

J590D_197309

Flasher(s) referred to in this SAE Standard are for nominal 12 V or 6 V d-c circuits and are intended to operate at the design load(s) for the turn signal system as stated by the flasher manufacturer. It is an engineering design standard and is supplemented by SAE J1055 covering service performance requirements for turn signal flashers.

Standard

SIX- AND TWELVE-VOLT CIGAR LIGHTER RECEPTACLES

1990-03-16

HISTORICAL

J563_199003

This SAE Standard covers the basic cigar lighter receptacle, which may optionally incorporate overload protective devices. Figure 1 and Table 1 show the cigar lighter receptacle and its pertinent dimensions. Lighter plugs shall be permanently marked either "6 volt" or "12 volt". Manufacturers of accessory plugs to energize devices such as trouble lamps and razors are cautioned to conform to the provisions given in this document. Live contact of any accessory plug shall be made with the center stud; the contacting member must not be less than 3.56 mm in diameter and have a minimum spherical radius of 2.54 mm at the contacting end. To prevent damage, the body of an accessory plug back of the contact end should be large enough to serve as a centering guide when it is inserted into the receptacle. The contact end of any accessory plug should have sufficient taper so as not to interfere with the receptacle bimetal fingers.

Standard

FLASHERS

1996-08-01

CURRENT

J1690_199608

This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal, hazard warning, warning lamp alternating, and combination flashers.

Standard

ELECTRIC FUSES (CARTRIDGE TYPE)

1978-05-01

HISTORICAL

J554B_197805

The fuses shown are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.

Standard

ELECTRIC FUSES

1972-10-01

HISTORICAL

J554A_197210

The fuses shown are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.