Search Results

Standard

USERS GUIDE FOR ARINC 616 AVIONICS SUBSET OF ATLAS

2017-11-29

CURRENT

ARINC605

This guide has been written as an applications manual for writing avionics test specifications that conform to ARINC Specification 616. It provides advice for converting ATLAS test specifications into ATLAS test programs and implementing them on Automatic Test Equipment (ATE).This guide has been written as an applications manual for writing avionics test specifications that conform to ARINC Specification 616. It provides advice for converting ATLAS test specifications into ATLAS test programs and implementing them on Automatic Test Equipment (ATE).

Standard

STANDARD DATA INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT PART 2 CAN COMMUNICATIONS, VERIFICATION, AND SYSTEM TEST GUIDANCE

2014-08-26

CURRENT

ARINC812AP2

The purpose of this specification is to define test procedures to verify the implementation of the Controller Area Network (CAN) interface for Galley Systems, as defined in ARINC Specification 812A, Part 1.

Standard

STANDARD DATA INTERFACE FOR GALLEY INSERT (GAIN) EQUIPMENT PART 1 CAN COMMUNICATIONS

2014-08-26

CURRENT

ARINC812AP1-1

The purpose of this specification is to define the general Galley Insert (GAIN)standardization philosophy, provide comprehensive equipment interfaces, and disseminate the most current industry guidance. Part 1 covers the Controller Area Network (CAN) data interface attachments, envelopes, and data content to be considered between all galley equipment using a Galley Data Bus as described within this specification. This document is intended as the successor and replacement for ARINC Specification 812. This document contains significant improvements to CAN data interfaces.

Standard

STANDARD DATA INTERFACE FOR GALLEY INSERT (GAIN) EQUIPMENT PART 1 CAN COMMUNICATIONS

2021-09-10

CURRENT

ARINC812AP1-2

The purpose of this specification is to define the general Galley Insert (GAIN)standardization philosophy, provide comprehensive equipment interfaces, and disseminate the most current industry guidance. Part 1 covers the Controller Area Network (CAN) data interface attachments, envelopes, and data content to be considered between all galley equipment using a Galley Data Bus as described within this specification. This document is intended as the successor and replacement for ARINC Specification 812. This document contains significant improvements to CAN data interfaces.

Standard

STANDARD ATLAS LANGUAGE FOR MODULAR TEST

1995-01-30

CURRENT

ARINC626-3

This standard defines an airline-recommended subset of the Abbreviated Test Language for All Systems (ATLAS)intended to be used in conjunction with test systems that are compliant with ARINC 608A. ATLAS is a standard abbreviated English language used in preparation and documentation of test procedures that can be implemented with automatic or semiautomatic test equipment.

Standard

PROGRAMMERS GUIDE FOR SMART SYSTEMS USING ARINC 626 ATLAS

2002-06-30

CURRENT

ARINC627-2

This standard provides guidance to ATLAS test programmers for developing, writing and documenting test programs in ARINC 626 ATLAS. This is a companion standard to ARINC 608A, Design Guidance for Avionics Test Equipment. It provides guidance to managers and system integrators for standardizing test programs and their documentation.

Standard

PRECISION AIRBORNE DISTANCE MEASURING EQUIPMENT (DME/P)

1994-08-17

CURRENT

ARINC709A-1

This standard provides general and specific design guidance for the development of a DME/P, which provides slant range distance from an aircraft to a selected DME ground facility. For landing purposes, the DME/P complements the angle MLS/ILS with precise range data.

Standard

PORTABLE MULTI-PURPOSE ACCESS TERMINAL (PMAT)

1996-08-25

CURRENT

ARINC644A

The PMAT is intended for use in the airplane maintenance environment allowing remote access to onboard systems. This standard describes the aircraft interface, operational capabilities and standards necessary to achieve interoperability with onboard systems, stand-alone internal or external mass memory devices, and ARINC standard printers.

Standard

MARK I AVIATION KU-BAND AND KA-BAND SATELLITE COMMUNICATION SYSTEM PART 2 ELECTRICAL INTERFACES AND FUNCTIONAL EQUIPMENT DESCRIPTION

2014-07-28

CURRENT

ARINC791P2-1

This document provides the interface definition of the Satcom system. Any signal crossing into or out of the communication system is documented to ease aircraft integration. Signals within the ARINC 791 Satcom system, and in particular, between the Modman and the Antenna Subsystem, are described to permit interchangeability between any Modman and any Antenna Subsystem.

Standard

MARK 5 AIRBORNE DISTANCE MEASURING EQUIPMENT

1988-10-31

CURRENT

ARINC709-8

This standard sets forth characteristics of a DME intended for installation in commercial transport aircraft. It provides slant range distance from an aircraft to a selected DME ground facility, which is presented to the flight crew on an indicator located in the instrument panel. Other applications include utilization of frequency scanning modes by navigation computers.

Standard

GUIDANCE FOR USE OF AVIONICS EQUIPMENT AND SOFTWARE IN SIMULATORS

1999-02-15

CURRENT

ARINC610A-1

This standard preserves all of the technical concepts of ARINC 610. ARINC 610A encompasses the lessons learned since ARINC 610 was issued, provides additional information defining each simulator function and the responses required by each type, and creates guidance information relevant to Integrated Modular Avionics (IMA).

Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

1996-03-01

CURRENT

ARINC732-1

This standard defines an airborne tape reproducer for passenger entertainment. The function of this equipment is to play pre-recorded tapes to the passengers through the airplane passenger entertainment system. Some channels may be used for boarding music through the public address system.

Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

1993-01-01

CURRENT

ARINC735-2

This standard defines as TCAS system capable of calculating the range, altitude and bearing of other aircraft equipped with Mode S transponders. The system monitors the trajectory of these aircraft for the purpose of determining if any of them constitute a potential collision hazard.

Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

1988-04-01

CURRENT

ARINC737-1

This standard defines a system of sensors and monitoring equipment to determine aircraft weight while it is on the ground. The system serves as an aid to the pilot for determining aircraft weight distribution and center of gravity (CG).

Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

2001-07-01

CURRENT

ARINC738-3

This standard defines an integrated ADIRS that provides air data information and directional guidance information for cockpit display. The ADIRS consists of up to three Air Data/Inertial Reference Units (ADIRUs) located in the aircraft electronic rack, an associated Control and Display Unit (CDU) and remotely mounted Air Data Modules (ADMs).

Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

2015-08-01

CURRENT

ARINC735B-2

This document defines a Traffic Surveillance capability for NextGen and SESAR airspace environments. Supplement 2 adds hybrid surveillance functionality. It satisfies recent updates to FAA Airworthiness Circular AC 20-151B - Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II), and Technical Standard Order TSO-119d requiring the annunciation of a hybrid surveillance failure. Supplement 2 also adds strobe program pinning, updates TCAS inputs status, improves aircraft troubleshooting, and supports recent central maintenance computer function block point updates.

Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

2003-01-01

CURRENT

ARINC735A-1

This update to the TCAS system standard introduces changes necessary to be compliant with RTCA Document DO-185A that includes TCAS software version 7.0.

Standard

GUIDANCE FOR DESIGN AND INTEGATION AND AIRCRAFT AVIONICS EQUIPMENT IN SIMULATORS

1992-02-01

CURRENT

ARINC610-1

This standard sets forth general philosophy and design guidance for using aircraft avionics equipment in simulators. Its goal is to improve simulator training by providing a better understanding among avionics designers, simulator designers, airframe manufacturers and airline simulator users in the use of aircraft avionic equipment in flight simulators. Full flight simulator, cockpit procedure trainer, cockpit system simulator or fixed base simulator, part task trainer (e.g., flight management system trainer), and maintenance training simulator guidance is included.

Standard

FULL-FORMAT PRINTER WITH GRAPHICS CAPABILITY

1994-03-01

CURRENT

ARINC744A-1

This standard sets forth the characteristics of a full-format printer capable of printing high resolution alphanumeric, semi-graphic and graphic images on 8.5x11-inch or A4 size paper. The printer is intended to be compatible with ARINC 744 printers. It has two bi-directional high-speed Ethernet ports to facilitate transfer of high throughput and burst mode data.

Standard

FULL-FORMAT PRINTER

1990-12-30

CURRENT

ARINC744

This standard sets forth the characteristics of a full-format printer capable of printing up to 132 characters of alphanumeric and/or semi-graphic data on 8.5 x 11 inch or A4 paper size. Participating equipment interface using ARINC 429 data buses. It is optionally capable of producing hard-copy graphics in the form of addressable dot plotting data.