Search Results

Estimation of soot deposited on a wall flow type DPF, is a vital information to ensure safe and efficient DPF management. Accuracy in determining mass of soot present inside the DPF ensures a correct regeneration management strategy in-terms of fuel efficiency and DPF safety considering soot overloading and too frequent regenerations. It also ensures an efficient detection of anomalies in the PM filtration mandated by the BSVI/EURO VI legislation as a part of On-board diagnostics. Classical approach of determining soot present inside DPF involves monitoring increase in pressure drop. Real time usage of such a model is limited by the inaccuracy of measuring pressure drop at low exhaust flows. Hence, contemporary engine controllers use pressure drop based models as a failsafe and estimate DPF soot loading by modelling soot release rate due to engine combustion and the rate at which it is oxidized.

In automotive electronics on-board diagnostics does the fault diagnosis and reporting. It provides the level of robustness required for the control electronics against various faults. The amount of diagnostic information available via on board diagnostics are depends on the type of vehicle. Pre-supply fuel pump is the component in the common rail hydraulic system. It pumps the fuel from the fuel tank to the inlet valve of the high pressure fuel pump. Electronic control unit synchronizes its operation with high pressure fuel pump. A dedicated driver module in the ECU controls the operation of pre-supply fuel pump. The driver module consist of an ASIC with internal voltage, current monitoring modules for the fault diagnosis and the pre-drivers to control external HS and LS power stages. The software part of the OBD programmed in the internal memory of the ASIC. The “Rds_on” of the power MOSFETs are used for the fault detection purpose.

A lithium ion battery system has been developed for use in Honda's FCX Clarity fuel cell vehicle. This represents the first time that Honda has employed lithium ion batteries. The battery system equals the high level of power of the ultracapacitor system used in the previous FCX vehicle but achieves a higher level of energy, contributing to various improvements in performance, such as the Clarity's superior acceleration feel and improved fuel efficiency. The system displays sufficient durability and reliability at the same time as satisfying requirements from the perspective of safety. In addition, positioning the battery system under the floor of the vehicle has increased cabin space, boosting the Clarity's commercial appeal.

This document focuses on the latest in-force regulations. However, in addition to latest information, the report may include historical information. As regulations are superseded, the previous entry will remain to help understand the change in requirements over time. The initial focus of the document includes light-, medium-, and heavy-duty on-road vehicles with all propulsion systems. The document will include information from the United States and Canada, with later publications expanding to other regions. Forecasts for future regulations will not be included in the spreadsheet but be kept in a separate document. The document may be expanded to other types of applications/vehicles as information becomes available.

OBD system requirements were first developed by the California Air Resources Board, the U.S. Environmental Protection Agency, and the European Commission. New OBD requirements should be as consistent as possible with existing requirements to maximize reliability and to minimize system complexity, proliferation of configurations, and consumer cost. New OBD requirements from around the world are briefly reviewed and most are consistent with the original U.S. and European requirements. Worldwide OBD requirements are being further harmonized under the United Nations, Economic Commission for Europe, World Forum for Harmonization of Vehicle Regulations (WP29). Presenter David H. Ferris, General Motors Company

Meet like-minded mobility engineersto discuss new legislation and regulations around thermal management, emissions control, safety, and energy conservation.

Justify your attendance and learn the benefits of attending the 2023 On-Board Diagnostics Symposium-Europe.

September 17-19, 2019 │ Garden Grove, CA, USA

Why should you attend the 2022 Thermal Management Systems Symposium

The potential peaking of world conventional oil production and the possible imperative to reduce carbon emissions will put great pressure on vehicle manufacturers to produce more efficient vehicles, on vehicle buyers to seek them out in the marketplace, and on energy suppliers to develop new fuels and delivery systems. Four cases for stabilizing or reducing light vehicle fuel use, oil use, and/or carbon emissions over the next 50 years are presented. Case 1 - Improve mpg so that the fuel use in 2020 is stabilized for the next 30 years. Case 2 - Improve mpg so that by 2030 the fuel use is reduced to the 2000 level and is reduced further in subsequent years. Case 3 - Case 1 plus 50% ethanol use and 50% low-carbon fuel cell vehicles by 2050. Case 4 - Case 2 plus 50% ethanol use and 50% low-carbon fuel cell vehicles by 2050. The mpg targets for new cars and light trucks require that significant advances be made in developing cost-effective and very efficient vehicle technologies.

Fuel cell vehicles are currently undergoing extensive research and development because of their potential for high efficiency and low emissions. A complete well-to-wheels evaluation is helpful when considering the introduction of advanced vehicles that could use a new fuel, such as hydrogen. Several modeling tools developed by Argonne National Laboratory were used to evaluate the impact of several new vehicle configurations. A transient vehicle simulation software code, PSAT (Powertrain System Analysis Toolkit), was used with a transient fuel cell model derived from GCTool (General Computational Toolkit); and GREET (Greenhouse gases, Regulated Emissions and Energy use in Transportation) was employed in estimating well-to-tank performances. This paper compares the well-to-wheels impacts of several advanced SUVs, including conventional, parallel and series hybrid-electric and fuel cell vehicles.

The well-to-wheel greenhouse gas (GHG) emissions and energy use of selected alternative vehicles are compared to those of a conventional gasoline vehicle. The vehicle technologies investigated are internal combustion engine, hybrid and fuel cell technology. The fuels are assumed to be produced from either crude oil or natural gas. Wherever possible real data has been used. The study shows that hybrid vehicles emit a similar amount of greenhouse gas as fuel cell vehicles. The diesel hybrid uses the least primary energy. The least greenhouse gas emissions are produced by natural gas and hydrogen hybrid and fuel cell vehicles.

The National Renewable Energy Laboratory (NREL) collaborated with Millennium Cell and DaimlerChrysler to study heat and water management in a sodium borohydride (NaBH4) storage/processor used to supply hydrogen to a fuel cell in an automotive application. Knowledge of heat and water flows in this system is necessary to maximize the storage concentration of NaBH4, which increases vehicle range. This work helps evaluate the NaBH4 system's potential to meet the FreedomCAR program technical target of 6 wt% hydrogen for hydrogen storage technologies. This paper also illustrates the advantages of integrating the NaBH4 hydrogen processor with the fuel cell.

Volvo Group CTO discusses electric and autonomous vehicles

A neural network-based engine performance, fuel efficiency and emissions prediction system has been developed for both spark-ignited and compression ignition engines. Through limited training on an engine dynamometer, the neural network system is able to predict accurately real-time engine power output, fuel consumption and regulated exhaust emissions using readily measured engine parameters, across highly transient engine operating cycles. Applications for the models developed using this process include engine diagnostics, virtual sensing of unmeasured or unmeasurable engine emissions, engine control, and engine and vehicle modeling. Results from the prediction of the performance and emissions from a 300 hp CIDI engine and a 120 hp SI engine are presented, showing the potential of this newly developed approach.

For zero tail pipe emission transportation, fuel cell technology is the best available option for replacing commercial IC engines. Worldwide lot of research work is going on in development of fuel cell vehicles. This work deals with the virtual development of system architecture for hybrid electric - fuel cell light commercial vehicle. The goal of this research work is to virtually design, model and convert an existing LCV model in to a hybrid electric fuel cell vehicle for the same performance and better efficiencies with zero tail pipe emissions. A unique fuel cell management system is developed and used for obtaining better efficiencies. A mathematical model of the vehicle is developed using GT-Drive which tracks the energy flow and fuel usage within the vehicle drivetrain. The vehicle is tested on chassis dynamometer to provide data for validation of the mathematical model. Model results and vehicle data show good correlation when validated.

Fossil fuels are non-renewable resources of energy, being one of the largest fractions of the greenhouse gases (GHG). Hydrogen is indicated as a fuel with potential to replace fossil fuels in the future, mainly because the combustion products are environmentally friendly, with high specific energy, in comparison with other sources of fuel. However, to use hydrogen as a fuel in internal combustion engines (ICE) or in fuel cell vehicles (FCV), it is necessary to separate it from primary elements (water, biomass, natural gas, etc.). It´s also need to consider storage and transport in order to handle a fuel like hydrogen. All of these phases require energy, which may be from renewable or non-renewable sources, causing environmental impacts. In order to investigate if the hydrogen is economically viable, aspects such as environmental impacts, safety and technological feasibility need to be studied.

A vehicle-cycle module of the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model has been developed at Argonne National Laboratory. The fuel-cycle GREET model has been published extensively and contains data on fuel-cycles and vehicle operation. The vehicle-cycle module evaluates the energy and emission effects of vehicle material recovery and production, vehicle component fabrication, vehicle assembly, and vehicle disposal/recycling. The addition of the vehicle-cycle module to the GREET model provides a comprehensive lifecycle-based approach to compare energy use and emissions of conventional vehicle technologies and advanced vehicle technologies such as hybrid electric vehicles and fuel cell vehicles.

The performance of the OBD-II catalyst monitor of a 2.2 Corsica TLEV was investigated while operating on fuels with differing sulfur levels. Testing was performed using a driving schedule producing operating conditions which were acceptable to the production OBD-II system for active diagnosis of catalyst performance. During each test, catalyst diagnostic data and emissions performance data were collected simultaneously. Tests were performed at 22° C using California Phase II (35 ppm sulfur content) and Indolene clear (470 ppm sulfur content) fuels, and at 4°C using a commercial oxygenated Winter fuel (320 ppm sulfur content). Four dynamometer-aged converters were using in the testing. Converter performance in the form of HC conversion efficiency was found to generally decrease when the sulfur content in the fuel was increased.

The impacts of fuel cell system power response capability on optimal hybrid and neat fuel cell vehicle configurations have been explored. Vehicle system optimization was performed with the goal of maximizing fuel economy over a drive cycle. Optimal hybrid vehicle design scenarios were derived for fuel cell systems with 10 to 90% power transient response times of 0, 2, 5, 10, 20, and 40 seconds. Optimal neat fuel cell vehicles where generated for responses times of 0, 2, 5, and 7 seconds. DIRECT, a derivative-free optimization algorithm, was used in conjunction with ADVISOR, a vehicle systems analysis tool, to systematically change both powertrain component sizes and the vehicle energy management strategy parameters to provide optimal vehicle system configurations for the range of response capabilities.