Search Results

Cycle-to-cycle variations in internal combustion engines are known to lead to limitations in engine load and efficiency, as well as increases in emissions. Recent research has led to the identification of the source of cyclic variations of pressure, soot and NO emissions in direct injection common rail diesel engines, when employing a single block injection and operating under long ignition delay conditions. The variations in peak pressure arise from changes in the diffusion combustion rate, caused by randomly occurring in-cylinder pressure fluctuations. These fluctuations result from the excitation of the first radial mode of vibration of the cylinder gases which arises from the rapid premixed combustion after the long ignition delay period. Cycles with high-intensity fluctuations present faster diffusion combustion, resulting in higher cycle peak pressure, as well as higher measured exhaust NO concentrations.

A set of piston rings is used to form a dynamic gas seal between the piston and cylinder wall. Many physical phenomena are associated with the operation of the system piston-ring-cylinder (PRC), such as: inter-ring gas dynamics for the labyrinth seal, hydrodynamic lubrication and mixed friction in gaps between the rings and cylinder liner, oil flow and distribution of lubricant along the liner, twist motion of rings, liner temperature influence on the oil viscosity. The first part of the paper presents a comprehensive model of the PRC system developed by the author. Among own models it includes several models taken from literature, like: a model of viscous oil flow between rough gap surfaces formulated by Patir & Cheng and an elastic contact model of Greenwood & Tripp. The main parts of developed mathematical model and software have been experimentally verified during a research period of the author at the marine engine designing centre ”Wärtsilä” in Switzerland.

This paper deals with the influence of a wall soot layer of varying thickness on the unsteady heat transfer between the fluid and the engine cylinder wall during a full cycle of a four-stroke Diesel engine operation. For that purpose a computational investigation has been carried out, using a one-dimensional model of a multi-layer solid wall for simulating the transient response within the confinement of the combustion chamber. The soot layer is thereby of varying thickness over time, depending on the relative rates of deposition and oxidation. Deposition is accounted for due to a thermophoretic mechanism, while oxidation is described by means of an Arrhenius type expression. Results of the computations obtained so far show that the substrate wall temperature has a significant effect on the soot layer dynamics and thus on the wall heat flux to the combustion chamber wall.