Search Results

Fuel consumption of a modern combustion engine is significantly influenced by the mechanical friction losses. Particularly in typical city driving, the reduction of the engine friction losses offers a remarkable potential in emission and fuel consumption reduction. The analysis of the engine friction distribution of modern engines shows that the piston group has a high share at total engine friction. This offers a high potential to optimize piston group friction. The paper presents results of recent research and development work in the field of the tribological system piston/piston ring/cylinder bore.

The problem of cracks in cylinder heads due to low cycle fatigue (thermal fatigue) is well known for engines with high specific power output. However it is still difficult to predict the lifetime of a new cylinder head due to the number of influencing parameters and the complexity of material behavior. Better understanding of cylinder head fatigue can improve the development process of a new engine concerning CAE as well as mechanical testing efficiency. Therefore a CAE tool which can calculate strains and stresses as a function of time for a defined operating cycle of the engine was developed. In parallel a measuring technique was developed which allows to measure strains on the surface of the combustion chamber side of the cylinder head during fired engine operation. For different Aluminum-Silicon casting alloys the material behavior was described in the Finite Element Program ABAQUS by a nonlinear kinematic / isotropic hardening model.

Modern passenger car engines are designed to operate at increasingly higher rated engine speeds with more internal parts (multi-valve engines) requiring lubrication. The paper presents results of research and development activities to reduce the actual feed rate of the oil consumers to their real requirements depending on the most significant influence parameters. Based on these results an optimization strategy is presented which combines CAE tools with data from experimental work. In the conclusion of the paper recommendations are summarized to show the optimization potential of actual lubrication and ventilation systems concerning design. power input respectively oil consumption.

Modern passenger car engines are designed to operate at increasingly higher rated engine speeds with higher thermal loads. To reduce engine weight and length, the engines are usually siamesed without a cooling path between the cylinder liners. This leads to high temperatures in the siamesed area and to an increase in liner deformation. The distortion of the cylinder liners of internal combustion engines has a significant affect on engine operation. It can affect the oil consumption, the blow-by, the wear behavior and, due to friction, the fuel consumption. In order to achieve future requirements regarding exhaust emissions and fuel consumption, the development of low distortion engine blocks will play a significant role.

The connecting rod big-end bearing is one of the most heavily loaded components of the lubrication system of high speed combustion engines. The bearing's oil supply has to be designed consciantious in order to ensure an immaculate reliability in operation. The supply oil flow has to pass the main bearing and the rotating crankshaft before entering the connecting rod bearing. It is common knowledge that the centrifugal forces due to the crankshaft rotation influence the oil flow through the also rotating supply bore. The centrifugal forces effect a parabolic pressure profile along the supply bore. The oil pump has to ensure a certain pressure level in the main oil gallery (depending on the engine speed and the spherical positioning of the rotating bore) to overcome these centrifugal forces. If the oil pressure is lower than this certain level the bearing's oil supply will be interrupted - bearing damage is the consequence.

Beside the traditional prediction of stresses and verification by mechanical testing the optimization of cylinder liner bore distortion is one of today's most important topics in crankcase structure development. Low bore distortion opens up potentials for optimizing the piston group. As the piston rings achieve better sealing characteristics in a low deformation cylinder liner, oil consumption and blow-by are reduced. For unchanged oil consumption and blow-by demands, engine friction and subsequently, fuel consumption could be reduced by decreasing the pre-tension of the piston rings. From the acoustical point of view an optimization of piston-slap noise is often based on an optimized bore distortion behavior. Apart from basics to the behavior of liner bore distortion the paper presents advanced analytical and empirical methods for detailed prediction, verification and optimization of bore distortion taking into account the effective engine operation conditions.