This document addresses AS8879 thread inspection issues relating to selection, usage and capability of gages. It addresses the selection of calibrated measurement gages, the need for defined quality metrics, the methodology of determining the appropriate guardband factors, and the minimum inspection requirements for single element pitch diameter gages. Users of this document shall apply the information described herein for the evaluation of the capability of their measurements based on the measurement consumer risk. It involves the analysis of the measurement (product) distribution and biases of both the product and measurement system distributions. It protects the consumer from the worst case distribution results. A whitepaper has been developed to provide supporting documentation and the rationale used in the development of this standard. This whitepaper will be published by the SAE as an Aerospace Information Report (AIR6553).
This standard provides a method of applying surface roughness, waviness and lay control. The data included herein also covers the method of applying surface roughness symbols and related designations to drawings and specifications of parts when applicable. This standard is based on the Arithmetical Average (AA) method of instrumentation. Data compiled are based on current manufacturing practices. It also includes a summary of data published in the latest issue of the American Standards Association publication ASA B46.1.
This standard provides a method of applying surface roughness, waviness and lay control. The data included herein also covers the method of applying surface roughness symbols and related designations to drawings and specifications of parts when applicable. This standard is based on the Arithmetical Average (AA) method of instrumentation. Data compiled are based on current manufacturing practices. It also includes a summary of data published in the latest issue of the American Standards Association publication ASA B46.1.
This standard provides a method for the application of surface finish control primarily to aircraft engine and propeller parts. Recommendations for a Surface Roughness Standard are contained in A.S.A. publication B46 and this S.A.E. Aeronautical Standard contains a summary of information therein plus other information which has been compiled from current manufacturing practice.
This standard provides a method for the application of surface finish control primarily to aircraft engine and propeller parts. Recommendations for a Surface Roughness Standard are contained in A.S.A. publication B46 and this S.A.E. Aeronautical Standard contains a summary of information therein plus other information which has been compiled from current manufacturing practice.
This specification covers studs made from a corrosion and heat resistant, precipitation hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286.
This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286. The following specification designations and their properties are covered:
This procurement specification covers studs made from A286 alloy of the type identified under the Unified Numbering System as UNS S66286 which have integrated locking keys to prevent rotation of the stud when installed in the prepared hole.
This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.
This SAE Aerospace Standard (AS) defines an involute with a 30° pressure angle and a full radius at the roots thus reducing the stress concentration in the area of the root.
This specification covers metric aircraft quality spacers for use as positioners for tubes, flat washers for use as load spreaders, galling protection of adjacent surfaces and or material compatibility, and key or tab washers for use as locks for bolts, nuts, and screws.
This standard establishes the basic triangular profile for the MJB thread form, the design profiles, standard pitches, tolerance classes, formulae for tolerances and dimensions, tolerance tables, and a system of designations. Because of the specialized application for buttress threads, no preferred diameter-pitch series have been established for this standard and each application will require use of the thread formulae for dimensions and related tolerances given herein for deriving the thread dimensional requirements.
This standard establishes the basic triangular profile for the MJB thread form, the design profiles, standard pitches, tolerance classes, formulae for tolerances and dimensions, tolerance tables, and a system of designations. Because of the specialized application for buttress threads, no preferred diameter-pitch series have been established for this standard and each application will require use of the thread formulae for dimensions and related tolerances given herein for deriving the thread dimensional requirements.
This standard specifies the characteristics of the MJ profile metric series of screw threads, altered from ISO 68 M Profile, to include a mandatory controlled radius of 0.18042P to 0.15011P at the root of the external thread and with the minor diameter of both external and internal threads increased to provide a basic thread height of 0.5625H in order to accommodate the external thread maximum root radius.