Search Results

An industry-wide interest has arisen with regards to the properties and capabilities of investment cast PH 13-8Mo corrosion resistant steel. Specifically of interest are the structural applications in the aerospace industry for this product heat treated to the H1000 condition. The objective of this AMEC cooperative test program was to generate and compile useful data for aerospace structural evaluation of investment cast PH 13-8Mo heat treated to H1000. The focus of the test program was the determination of overall mechanical properties, fatigue, fracture toughness, and crack growth data along with basic microstructural evaluation of the investment cast material. Additional objectives included the evaluation of mechanical property variations between cast and machined tensile specimens and evaluation of microstructural constituents. All testing was performed to determine the suitability of PH 13-8Mo, H1000 investment castings for use in the aerospace industry.

An industry-wide interest has arisen with regards to the properties and capabilities of investment cast PH 13-8Mo corrosion resistant steel. Specifically of interest are the structural applications in the aerospace industry for this product heat treated to the H1000 condition. The objective of this AMEC cooperative test program was to generate and compile useful data for aerospace structural evaluation of investment cast PH 13-8Mo heat treated to H1000. The focus of the test program was the determination of overall mechanical properties, fatigue, fracture toughness, and crack growth data along with basic microstructural evaluation of the investment cast material. Additional objectives included the evaluation of mechanical property variations between cast and machined tensile specimens and evaluation of microstructural constituents. All testing was performed to determine the suitability of PH 13-8Mo, H1000 investment castings for use in the aerospace industry.

This specification covers the requirements of inhibited 1,1,1 trichloroethane for vapor degreasing, (see 6.1).

This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.

This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.

This specification covers an anti-seize compound in the form of a grease.

This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.

This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.

This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.

This specification covers the engineering requirements for producing a thin tin coating on aluminum alloys by an immersion process.

This SAE Standard specifies the properties of sulphuric acid anodizing of aluminum and aluminum alloys.

This SAE Standard specifies the properties of sulphuric acid anodizing of aluminum and aluminum alloys.

This specification covers a procedure for revealing the macrostructure and microstructure of titanium alloys.

This specification covers a procedure for revealing the macrostructure and microstructure of titanium alloys.

This specification covers the procedure to be used for aluminum spraying metallic parts and the properties of the finish.