Refine Your Search

Date

Date

Topic

Topic

On-board energy sources ACBG Plain Bearing Committee Materials properties Casting

Search Results

Viewing 1 to 20 of 43
123Next >Last >>
Sort by title
Standard

Plain Bearing Wear Measurement
2010-06-25
HISTORICAL
ARP5448/7
This standard details two methods of inspecting TFE lined spherical or journal bearing wear outside the test apparatus. The methods described herein are applicable only to bearings which were unidirectionally loaded and the area of sliding wear is known and held constant throughout the dynamic test. The two methods described are: a Destructive Inspection - Cut and measure (not applicable to molded liners) b Non-destructive Inspection - Radial play (gage) measurement
Standard

Plain Bearing Wear Measurement
2016-12-12
CURRENT
ARP5448/7A
This standard details two methods of inspecting PTFE lined spherical or journal bearing wear outside the test apparatus. The methods described herein are applicable only to bearings which were unidirectionally loaded and the area of sliding wear is known and held constant throughout the dynamic test. The two methods described are: a Destructive Inspection - Cut and measure (not applicable to molded liners) b Nondestructive Inspection - Radial play (gauge) measurement
Standard

Plain Bearing Test Methods
2018-08-23
CURRENT
ARP5448B
This SAE Aerospace Recommended Practice (ARP) establishes methods for testing airframe plain bearings. The purpose of ARP5448 and its associated slash sheets is to document test methods commonly used to evaluate airframe bearings. These test methods may be referenced in specifications, part standards, purchase orders, etc., when the test is deemed appropriate to the intended use of the bearing by the end user of the bearing. These test methods are not intended to encompass every conceivable requirement for an airframe bearing. The end user of the bearing must exercise engineering judgment to determine the most appropriate standard and/or nonstandard tests for the application.
Standard

Plain Bearing Test Methods
2007-07-09
HISTORICAL
ARP5448A
This SAE Aerospace Recommended Practice (ARP) establishes methods for testing airframe plain bearings. The purpose of ARP5448 and its associated slash sheets is to document test methods commonly used to evaluate airframe bearings. These test methods may be referenced in specifications, part standards, purchase orders, etc. when the test is deemed appropriate to the intended use of the bearing by the end user of the bearing. These test methods are not intended to encompass every conceivable requirement for an airframe bearing. The end user of the bearing must exercise engineering judgment to determine the most appropriate standard and/or nonstandard tests for the application.
Standard

Plain Bearing Test Methods
2001-03-01
HISTORICAL
ARP5448
This SAE Aerospace Recommended Practice (ARP) establishes methods for testing airframe plain bearings. The purpose of ARP5448 and its associated slash sheets is to document test methods commonly used to evaluate airframe bearings. These test methods may be referenced in specifications, part standards, purchase orders, etc. when the test is deemed appropriate to the intended use of the bearing by the end user of the bearing. These test methods are not intended to encompass every conceivable requirement for an airframe bearing. The end user of the bearing must exercise engineering judgment to determine the most appropriate standard and/or nonstandard tests for the application.
Standard

Plain Bearing High Speed Oscillation Test
2017-11-15
CURRENT
ARP5448/2
This test method outlines a standard procedure for performing cyclic reversing load testing on oscillating sliding bearings. The wear data from these tests is to be used for qualification requirements and to establish bearing design criteria.
Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating
2016-05-06
HISTORICAL
AS81934B
This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in the temperature range of -65 to +325 °F.
Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating
2019-09-16
CURRENT
AS81934C
This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in the temperature range of -65 to +325 °F.
Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating
2005-02-02
HISTORICAL
AS81934A
This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in the temperature range of -65 to +325 °F (-54 to +163 °C).
Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation, General Specification For
1998-03-01
HISTORICAL
AS81820
This specification covers plain spherical bearings which are self-aligning and self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner between the ball and race (outer ring). PTFE is incorporated in a fabric or composite material bonded to the ID of the outer ring, or in a composite material molded into a pre-formed cavity between the inner and outer ring. These bearings are for use in the temperature range -65°F to +325°F (-54°C to +163°C.)
Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation
2014-07-22
CURRENT
AS81820D
This SAE Aerospace Standard (AS) covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE) in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).
Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation
2018-05-21
WIP
AS81820E
This SAE Aerospace Standard (AS) covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE) in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).
Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation
2004-12-29
HISTORICAL
AS81820B
This standard covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).
Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation
2008-03-25
HISTORICAL
AS81820C
This SAE Aerospace Standard (AS) covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).
123Next >Last >>
X