Refine Your Search

Date

Date

Topic

Topic

Chromium Engine cylinders Particulate matter (PM) Nickel Copper alloys AMS B Finishes Processes and Fluids Committee

Search Results

Viewing 1 to 20 of 286
123Next >Last >>
Sort by title
Standard

Weldability Test for Weld Filler Metal Wire
2011-04-13
HISTORICAL
ARP1876B
This SAE Aerospace Recommended Practice defines a method for determining the weldability of weld filler metal in continuous coil or cut length form. It is applicable to all solid (non flux-containing) wires. It is intended as a referee method for testing weld filler metals in case of dispute between purchaser and vendor.
Standard

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
2017-03-21
CURRENT
AMS03_4A
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
2015-04-27
HISTORICAL
AMS03_4
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard

The Chemical Milling Process
2021-07-15
CURRENT
ARP1331C
This practice provides recommendations concerning the chemical milling of aluminum, magnesium, high temperature nickel alloys, titanium alloys, copper alloys, and specialty alloys.
Standard

TUNGSTEN CARBIDE-COBALT COATING Detonation Process
1994-10-01
HISTORICAL
AMS2435E
This specification covers the engineering requirements for applying tungsten carbide/cobalt coatings to metal parts by the detonation process and the properties of such coatings.
Standard

TIN PLATING
1975-06-01
HISTORICAL
AMS2408C
This specification covers the engineering requirements for electrodeposition of tin on metals and the properties of the deposit.
Standard

TIN PLATING
1979-11-01
HISTORICAL
AMS2408D
This specification covers the engineering requirements for electrodeposition of tin on metals and the properties of the deposit.
Standard

TIN PLATING
1991-10-01
HISTORICAL
AMS2408E
This specification covers the engineering requirements for electrodeposition of tin on metals and the properties of the deposit.
Standard

Selective (Brush) Nickel Plating Low-Stressed, Low Hardness Deposit
2000-10-01
CURRENT
AMS2441A
This specification covers the engineering requirements for selective (brush) electrodeposition of nickel and the properties of the deposit. This process has been used typically to provide moderate corrosion and oxidation resistance and dimensional build-up and restoration of parts which may operate in service up to 700 degrees F (371 degrees C), where low tensile stress in the deposit is required to avoid marked reduction of fatigue strength, but usage is not limited to such applications.
Standard

Selective (Brush) Nickel Plating Low-Stressed, Hard Deposit
2000-10-01
CURRENT
AMS2439A
This specification covers the engineering requirements for selective (brush) electrodeposition of nickel and the properties of the deposit. This process has been used typically to provide good wear resistance and dimensional build-up and restoration of parts which may operate in service up to 450 degrees F (232 degrees C), where low tensile stress in the deposit is required, but usage is not limited to such applications. Diffusion heat treatment of the deposit is not required.
Standard

Salts, Heat-Treating (For Metals)
2021-08-06
CURRENT
AMS2821
This specification covers the procurement of granular heat-treating salts suitable for use in the molten state.
Standard

SILVER PLATING Nickel Strike, High Bake
1984-10-01
HISTORICAL
AMS2410G
This specification covers the engineering requirements for electrodeposition of silver on other metals, usually with a nickel strike between the basis metal and the silver, and the properties of the deposit.
Standard

SILVER PLATING Nickel Strike, High Bake
1977-01-15
HISTORICAL
AMS2410F
This specification covers the engineering requirements for electrodeposition of silver on other metals, usually with a nickel strike between the basis metal and the silver, and the properties of the deposit.
Standard

SILVER PLATING Copper Strike, Low Bake
1983-10-01
HISTORICAL
AMS2412F
This specification covers the engineering requirements for electrodeposition of silver, usually with a copper strike between the basis metal and the silver, and the properties of the deposit.
123Next >Last >>
X