Search Results

Standard

Torque-Tension Test Procedure for Steel Threaded Fasteners - Metric Series

2017-01-03

CURRENT

J174M_201701

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque type threaded steel fasteners 6 through 24 mm nominal diameters. Realistically, torque-tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the inch series version, see SAE J174.

Standard

Steel Self-Drilling Tapping Screws

2021-07-28

CURRENT

J78_202107

This SAE Standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications having point Styles 2, 3, 4, and 5. It is the objective of this document to ensure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly.

Standard

Steel Self-Drilling Tapping Screws

2013-04-16

HISTORICAL

J78_201304

This SAE Standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications. It is the objective of this document to insure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly. Appendix A is included to provide a recommended technique for measuring the case depth on the screws.

Standard

Steel Self-Drilling Tapping Screws

2022-04-14

WIP

J78

This SAE Standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications having point Styles 2, 3, 4, and 5. It is the objective of this document to ensure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly.

Standard

Spring Nuts

2013-04-16

HISTORICAL

J891_201304

Included herein are complete general and dimensional specifications for metric and inch types of spring nuts recognized as SAE standard. These nuts are intended for general use where the engagement of a single thread on the mating screw is considered adequate for the application. It should be noted that spring nuts having other configurations, dimensions, provisions for ground, etc., are available and manufacturers should be consulted.

Standard

Spring Nuts

2016-11-28

CURRENT

J891_201611

Included herein are complete general and dimensional specifications for metric and inch types of spring nuts recognized as SAE standard. These nuts are intended for general use where the engagement of a single thread on the mating screw is considered adequate for the application. It should be noted that spring nuts having other configurations, dimensions, provisions for ground, etc., are available and manufacturers should be consulted.

Standard

STEEL SELF-DRILLING TAPPING SCREWS

1973-10-01

HISTORICAL

J78B_197310

This standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly. An Appendix is included to provide a recommended technique for measuring the case depth on the screws.

Standard

SPRING TYPE STRAIGHT PINS

1972-11-01

HISTORICAL

J496_197211

Standard

Rod Ends and Clevis Pins

2013-02-25

CURRENT

J493_201302

Standard

RIVETS AND RIVETING

1968-05-01

HISTORICAL

J492_196805

Standard

Protective Coatings for Fasteners

2013-04-15

HISTORICAL

J1648_201304

This SAE Information Report is provided as an advisory guide. Careful discretion as to application is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. It covers finishes applied to fasteners and related topics, corrosion resistance, lubricity, electrical grounding, ultraviolet light, and embrittlement. Table 1 lists these coatings and their properties so that finish selection can be reasonably made in accordance with known and anticipated fastener assembly applications. Application of protective coatings will affect fastener dimensions. This is especially critical for the thread fit of mating parts because the pitch diameter increases by four times the coating thickness. Explanation is covered in Section 5.

Standard

Mechanical and Quality Requirements for Tapping Screws

2005-08-29

HISTORICAL

J933_200508

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered in ASME B 18.6.4, ‘Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws’.)

Standard

Mechanical and Quality Requirements for Tapping Screws

2013-02-25

CURRENT

J933_201302

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered in ASME B 18.6.4, Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws’.)

Standard

MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS

1965-07-01

HISTORICAL

J933_196507

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. It is intended to cover only tapping screws of the type and dimensions covered in SAE J478. Requirements for other types of tapping screws are not covered in this recommended practice. The primary objective of the specification is to insure that screws form or cut mating threads in materials of construction into which they are normally driven, without deforming their own thread and without breaking during assembly or service.

Standard

MECHANICAL AND QUALITY REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

1971-06-01

HISTORICAL

J429F_197106

This SAE Standard covers the mechanical and quality requirements for steel bolts, screws, studs, and sems used in automotive and related industries in sizes to 1½ in, inclusive. This standard does not include limits for surface discontinuities. Where usage requires such control, limits may be specified separately. For certain type, size, and length of products this may be done by the statement: “Surface discontinuities shall not exceed the limits shown in SAE J123.” NOTE: Previous issues of this standard also covered nuts, now covered separately in SAE J995.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

1974-09-01

HISTORICAL

J995C_197409

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes ¼ to 1½ in., inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J104.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

1979-06-01

HISTORICAL

J995_197906

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes ¼ to 1 ½ in., inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J104.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

1983-08-01

HISTORICAL

J429_198308

This SAE Standard covers the mechanical and material requirements for steel bolts, screws, studs, sems,1 and U-bolts2 used in automotive and related industries in sizes to 1¾ in, inclusive. Note: Previous issues of this standard also covered nuts, now covered separately in SAE J995 (August, 1967).

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

1977-07-01

HISTORICAL

J429I_197707

This SAE Standard covers the mechanical and material requirements for steel bolts, screws, studs, sems1, and U-bolts2 used in automotive and related industries in sizes to 1½ in., inclusive. NOTE: Previous issues of this standard also covered nuts, now covered separately in SAE J995.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

1977-07-01

HISTORICAL

J429J_197707

This SAE Standard covers the mechanical and material requirements for steel bolts, screws, studs, sems1, and U-bolts2 used in automotive and related industries in sizes to 1½ in., inclusive. NOTE: Previous issues of this standard also covered nuts, now covered separately in SAE J995.